summaryrefslogtreecommitdiff
path: root/configs/tbs2910_defconfig
AgeCommit message (Collapse)Author
2020-06-25tbs2910: Drop the 'bd' commandSimon Glass
This board is very close to its limit. Drop this command before the bd refactoring, which increases the size slightly on one toolchain. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-18tbs2910: migrate to DM_VIDEOAnatolij Gustschin
Migration to DM_VIDEO driver is long overdue, configure it in board config files. To enable the display set stdout like: setenv stdout serial,vidconsole Signed-off-by: Anatolij Gustschin <agust@denx.de> Tested-by: Soeren Moch <smoch@web.de>
2020-06-12board: tbs2910: Enable distro_boot support.Denis 'GNUtoo' Carikli
This keeps the compatibility with the old bootcmd. The fdtfile environment variable also needed to be set to imx6q-tbs2910.dtb to enable booting mainline kernels otherwise with extlinux.conf it tries to load mx6-tbs2910.dtb instead. With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution, we have the following size differences: - text: +2041 bytes - data: 0 bytes - bss: 0 bytes - total: +2041 bytes Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> Reviewed-by: Soeren Moch <smoch@web.de>
2020-06-12board: tbs2910_defconfig: Add support for booting general purpose distributionsDenis 'GNUtoo' Carikli
This is needed to enable distro_boot support later on. Adding the necessary configuration to enable booting general purpose distributions is typically done by enabling CONFIG_DISTRO_DEFAULTS. However the resulting image size is is already very close to the size limit and PXE isn't strictly needed, so instead we made sure that all the configuration selected by CONFIG_DISTRO_DEFAULTS were selected, with the exception of PXE related configuration (CONFIG_BOOTP_PXE and CONFIG_CMD_PXE) that are both disabled. With arm-linux-gnueabi-gcc 9.3.0-1 from the Parabola GNU/Linux distribution, we have the following size differences: - text: +7526 bytes - data: +28 bytes - bss: -12 bytes - total: +7542 bytes Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> Reviewed-by: Soeren Moch <smoch@web.de>
2020-06-12board: tbs2910: move CONFIG_BOOTCOMMAND from header to defconfigDenis 'GNUtoo' Carikli
This doesn't affect the size of the image: with arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution, the text, data, bss and total sizes remain unchanged. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> Reviewed-by: Soeren Moch <smoch@web.de>
2020-06-12board: tbs2910: disable CONFIG_GZIPDenis 'GNUtoo' Carikli
As that the resulting image is already very close to the size limit, and that CONFIG_GZIP is not strictly required, removing it shouldn't hurt. With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution we have the following size reduction: - text: 9752 - data: 0 - bss: 16 - total: 9768 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> Acked-by: Soeren Moch <smoch@web.de>
2020-06-12board: tbs2910: disable loadb and loads commandsDenis 'GNUtoo' Carikli
The loadb and loads commands are not needed for booting. There are also more reliable and faster alternatives to loadb and loads that can be used with the current configuration. As that the resulting image is already very close to the size limit, removing the loadb and loads commands shouldn't hurt. With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution we have the following size reduction: - text: 6733 bytes - data: 116 bytes - bss: 1172 bytes - total: 8021 bytes Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> Acked-by: Soeren Moch <smoch@web.de>
2020-05-08treewide: mem: Move mtest related defines to KconfigAshok Reddy Soma
Move below defines which are used by mtest utility to Kconfig. CONFIG_SYS_MEMTEST_START CONFIG_SYS_MEMTEST_END Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Fix kmcoge5ne board, re-run migration as well] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-27tbs2910: add custom CONFIG_OF_REMOVE_PROPS list to defconfigAnatolij Gustschin
This shrinks the image size: all -3840.0 text -3840.0 Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Soeren Moch <smoch@web.de>
2020-01-22configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03tbs2910: Disable VxWorks image booting supportTom Rini
There are currently no known users of this functionality on this platform, disable it to prepare for additional VxWorks functionality that would cause this platform to fail to link. Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Soeren Moch <smoch@web.de>
2019-11-20env: Finish migration of common ENV optionsTom Rini
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbolTom Rini
Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-04mx6: tbs2910: Minimise libfdt code sizeSimon Glass
This board appears to be very near its size limit and cannot accept the new checking code in libfdt. Disable this code so this the board can continue to build. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-03tbs2910: Disable Plan9/RTEMS bootm supportTom Rini
We have once again reached a point where this board does not build in some cases with supported toolchains due to reaching a size constraint. To regain some space, disable support for Plan 9 / RTEMS images with the bootm command. Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-13board: tbs2910: Convert eth to driver modelSoeren Moch
So we can remove lots of legacy config code. Signed-off-by: Soeren Moch <smoch@web.de>
2019-10-13board: tbs2910: Convert pci to driver modelSoeren Moch
So we can get rid of legacy pci config code. PCI_PNP is not required for this board, remove it to reduce the size of the u-boot binary. DM_PCI does not start the host controller automatically anymore. Do so in preboot instead. Signed-off-by: Soeren Moch <smoch@web.de>
2019-09-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-23Convert CONFIG_FSL_USDHC to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_FSL_USDHC Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Add IMX8M, TARGET_S32V234EVB to FSL_USDHC list] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-02Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-06-23Convert to use fsl_esdhc_imx for i.MX platformsYangbo Lu
Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
2019-04-29configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-14board: tbs2910: Remove CMD_FDT support in defconfig to reduce u-boot sizeSoeren Moch
This fixes the build failure "u-boot.imx exceeds file size limit". Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13imx: move CONFIG_VIDEO_IPUV3 to defconfigsAnatolij Gustschin
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13board: tbs2910: Convert mmc to driver modelSoeren Moch
So we don't need to duplicate settings from the device tree in the board file. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Convert sata to ahci driver modelSoeren Moch
While at it, also configure 64-bit LBA support. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Convert i2c and rtc to driver modelSoeren Moch
So we don't need to duplicate settings from the device tree in the board file. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Convert usb to driver modelSoeren Moch
So we don't need to duplicate settings from the device tree in the board file. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Add pinctrl driver and convert gpio to driver modelSoeren Moch
We need this for additional driver model conversions. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Add device treeSoeren Moch
... as preparation for additional driver model coonversions. We use CONFIG_OF_EMBED here to keep u-boot.imx as final binary name. So we maintain compatibility with the original TBS u-boot and available HOWTOs for u-boot updates. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13board: tbs2910: Remove efi loader support in defconfig to reduce u-boot sizeSoeren Moch
Signed-off-by: Soeren Moch <smoch@web.de>
2019-01-19Kconfig: Migrate BOUNCE_BUFFERPhilipp Tomsich
The bounce buffer is used by a few drivers (most of the MMC drivers) to overcome limitations in their respective DMA implementation. This moves the configuration to Kconfig and makes it user-selectable (even though it will be a required feature to make those drivers work): the expected usage is for drivers depending on this to 'select' it unconditionally from their respective Kconfig (see follow-up patches). This commit includes a full migration using moveconfig.py to ensure that each commit compiles. To ensure bisectability we update dependencies of various drivers to now select BOUNCE_BUFFER when needed. [trini: Squash all patches to ensure bisectability] Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br> [dw_mmc portion] Reviewed-by: Fabio Estevam <festevam@gmail.com> [mxsmmc portion] Reviewed-by: Simon Glass <sjg@chromium.org> [tegra portion]
2019-01-09board: tbs2910: Remove FIT support in defconfig to reduce u-boot sizeSoeren Moch
The current defconfig build generates a u-boot.imx file that is too large for the available space on a eMMC/SD card. Installing this file overwrites the u-boot environment. So disable the unused FIT support to reduce the size of the u-boot binary. Signed-off-by: Soeren Moch <smoch@web.de>
2018-08-17Convert CONFIG_MII et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-08-16configs: Migrate CONFIG_NR_DRAM_BANKSTom Rini
We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-04configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-08treewide: Migrate CONFIG_FSL_ESDHC to KconfigMario Six
Migrate the CONFIG_FSL_ESDHC option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-02-23Convert CONFIG_BOOTP_BOOTPATH et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_DNS CONFIG_BOOTP_GATEWAY CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_PXE CONFIG_BOOTP_SUBNETMASK CONFIG_CMDLINE_EDITING CONFIG_AUTO_COMPLETE CONFIG_SYS_LONGHELP CONFIG_SUPPORT_RAW_INITRD CONFIG_ENV_VARS_UBOOT_CONFIG Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-run the migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-11configs: Migrate CONFIG_SYS_TEXT_BASETom Rini
On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-12-12ata: Migrate CONFIG_DWC_AHSATA to KconfigTuomas Tynkkynen
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-30configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-10cmd: Toggle the default value of CONFIG_CMD_IMLSTuomas Tynkkynen
Having this as a 'default y' is rather annoying because it doesn't actually compile unless other options are defined in the board header: ../cmd/bootm.c: In function 'do_imls_nor': ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'? i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) { Make it 'default n' so people who develop new boards that start from a blank defconfig have one less compilation failure to debug. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-03usb: gadget: Make g_dnl USB settings commonMaxime Ripard
The g_dnl USB settings for the vendor ID, product ID and manufacturer are actually common settings that can and should be shared by all the gadgets. Make them common by renaming them, and convert all the users. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-01configs: Migrate all of the existing USB symbols, except fastbootTom Rini
This syncs all of the currently Kconfig'd symbols out of the headers and into the defconfig files. This has two exceptions, first am335x_evm needs to be converted to DM in SPL and then it can stop undef'ing CONFIG_DM_USB. Leaving this as-is results in a build failure, and without work, run time failure. The other case is am43xx_evm.h and in turn am43xx_evm_usbhost_boot. The problem here is that we need DWC3 USB host mode in SPL, but still desire to have gadget mode in U-Boot proper. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-11Convert CONFIG_CMD_PCI to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_CMD_PCI Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-07Move PHYLIB to KconfigAlexandru Gagniuc
Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit (git 2.34.1) at 2024-12-29 15:02:32 +0000