summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2019-04-13colibri_imx6: enable fit image, gpt, imx thermal, efi loader supportMarcel Ziswiler
Enbale FIT image, GPT command, i.MX thermal and EFI loader support. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: move console in env from header file to defconfigMarcel Ziswiler
Move console in env from header file to defconfig. While at it also update copyright year. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: use distro defaultsMarcel Ziswiler
Use distro defaults and minimise default configuration again using savedefconfig. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13colibri_imx6: get rid of obsolete nospl configurationsMarcel Ziswiler
Now with SPL long since being in place even for recovery using SDP finally get rid of those nospl configurations. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13apalis_imx6: migrate usb to using driver modelMarcel Ziswiler
Migrate USB to using driver model. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13apalis_imx6: migrate mmc and sata to using driver modelMarcel Ziswiler
Migrate MMC and SATA to using driver model. While at it also enable SCSI driver model. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13apalis_imx6: migrate pmic and regulator to using driver modelMarcel Ziswiler
Migrate PMIC and regulator to using driver model. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13apalis_imx6: migrate i2c to using driver modelMarcel Ziswiler
Migrate I2C to using driver model. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13apalis_imx6: enable pin control driverMarcel Ziswiler
Enable pin control driver as required for further driver model migration. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13apalis_imx6: clean-up and migrate gpios to using driver modelMarcel Ziswiler
Migrate GPIOs to using driver model, properly request backlight, Ethernet PHY reset, MMC/SD card detect and USB power GPIOs and also enable SION bit in pin muxing for Apalis, backlight, eMMC reset, Ethernet PHY reset and USB power enable GPIOs. While at it also update copyright year, clean-up/re-order includes, add some comments clarifying ifdef scope and do some White-space clean-up. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13apalis_imx6: migrate to using device treeMarcel Ziswiler
Migrate to using device tree required for further driver model integration. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13apalis_imx6: enable fit image, gpt, imx thermal, efi loader supportMarcel Ziswiler
Enbale FIT image, GPT command, i.MX thermal and EFI loader support. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13apalis_imx6: move console in env from header file to defconfigMarcel Ziswiler
Move console in env from header file to defconfig. While at it also update copyright year and remove spurious comments and new lines. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13apalis_imx6: use distro defaultsMarcel Ziswiler
Use distro defaults and minimise default configuration again using savedefconfig. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13apalis_imx6: get rid of obsolete nospl configurationsMarcel Ziswiler
Now with SPL long since being in place even for recovery using SDP finally get rid of those nospl configurations. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13board: ge: store version information in fdtIan Ray
Add board-specific FDT function to store U-Boot version in device tree. Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13board: ge: ppd: Enable CONFIG_DM_MMCIan Ray
Use MMC device model, and remove USDHC pin configuration code since the pinctrl driver is used. Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13board: ge: ppd: Enable CONFIG_DMIan Ray
Add simplified, generalised, ppd device tree and enable CONFIG_DM. Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13board: ge: bx50v3: Enable CONFIG_DM_SPI, CONFIG_DM_SPI_FLASHIan Ray
Use SPI flash device model, and remove SPI pin configuration code since the pinctrl driver is used. Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13board: ge: bx50v3: Enable CONFIG_DM_GPIOIan Ray
Enable CONFIG_DM_GPIO as a pre-requisite for enabling CONFIG_DM_SPI. Add explicit gpio_requests. Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13board: ge: bx50v3: Enable CONFIG_DM_MMCIan Ray
Use MMC device model, and remove USDHC pin configuration code since the pinctrl driver is used. Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13board: ge: bx50v3: Enable CONFIG_DMIan Ray
Add simplified, generalised, bx50v3 device tree and enable CONFIG_DM. Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DTLukasz Majewski
This commit updates BK4's and PCM052's config files to support as much as possible device tree and model in u-boot. Moreover, remove CONFIG_* from pcm052.h (as those are now in bk4|pcm052_defconfig) Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052)Lukasz Majewski
This commit provides update and renames the bk4r1.dts to vf610-bk4r1.dts file with more on SoC HW description. The pcm052.dts has been renamed to vf610-pcm052.dts as well. Moreover, a new vf610-pcm052.drsi file has been introduced to reuse the common code between devices based on Phytec's pcm052 modules. Ported from Linux kernel - v4.20 (tag) Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13Merge tag 'pull-12apr19' of git://git.denx.de/u-boot-dmTom Rini
fdtdec tests and improvements for carve-outs pinctrl race-condition fix various other fixes in sandbox, sound, mkimage, etc.
2019-04-13Merge tag 'mips-pull-2019-04-12' of git://git.denx.de/u-boot-mipsTom Rini
- mt76xx: add USB support, small fixes - ath79: small fixes, add support for QCA9563 SoC and AP152 reference board - mscc: small fixes, add network support for JR2 and ServalT SoCs - bmips: small fixes, enable more drivers for ARM specific BCM6858 and BCM63158 SoCs - MIPS: fix redundant relocation of initrd images
2019-04-12Merge tag 'u-boot-stm32-20190412' of https://github.com/patrickdelaunay/u-bootTom Rini
stm32 patches for v2019.07-rc1 - Add trusted boot with TF-A for stm32mp1 - stm32mp1 dts files sync'ed with Linux version - add STM32MP1 Discovery boards (DK1 and DK2) - add STMFX gpio expander driver - misc improvement for stm3mp1 supports - rename stpmu1 to stpmic1 (official name) - stm32_qspi: move to exec_op (spi nor driver for stm32 mpu and mcu) - add STM32 FMC2 NAND flash controller driver
2019-04-12Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2019-04-12Merge git://git.denx.de/u-boot-marvellTom Rini
- Misc dts files sync'ed with Linux version (Chris) - Orion watchdog fix (Chris) - kwbimage changed to also support Marvell bin_hdr binary (Chris) - Add DM support to enable CONFIG_BLK for sata_mv (Stefan) - Enable BLK on multiple platforms (Stefan) - Misc minor fixes to AXP theadorable board (Stefan) - Correct logic for DM_SCSI + unconverted drivers check (stefan) - Misc changes to kirkwood to enable DM_USB here (Chris) - Change ahci_mvebu to enable usage on A38x (Baruch) - Update the kirkwood entry in git-mailrc (Baruch) - Misc minor improvements (turris, documentation) (Baruch) - Enhance sata_mv to support Kirkwood as well (Michael) - Add wdt command (Michael) - Add Marvell integrated CPUs (MSYS) support with DB-XC3-24G4XG board support (Chris)
2019-04-12mips: mt76xx: linkit-smart-7688: Enable USB and FS supportStefan Roese
This patch enables USB and file-system support on the LinkIt smart MT7688 module for both, the normal and the RAM default config. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12configs: mscc_servalt: Add network supportHoratiu Vultur
Update default config to use network driver for ServalT SoCs. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12configs: mscc_jr2: Add network supportHoratiu Vultur
Update default confing to use network driver for Jaguar2 SoCs. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12bcm963158: enable gpio supportPhilippe Reynes
Enable the gpio support (driver and command) in the configuration of the board bcm963158. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-12bcm968580xref: enable gpio supportPhilippe Reynes
Enable the gpio support (driver and command) in the configuration of the board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-12bcm968380gerg: enable gpio supportPhilippe Reynes
Enable the gpio support (driver and command) in the configuration of the board bcm968380gerg Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-12mips: add initial support for qca956x referenced boardRosy Song
QCA9563 is CPU used on AP152 board : Clock speed : 750 MHz , Arch : Mips 74Kc, Eth : SGMII interface, MIMO config : 3 * 3 450M, 2 * USB 2.0, Signed-off-by: Rosy Song <rosysong@rosinson.com> Changes for v2: - coding style cleanup - remove ununsed flash chip in defconfig - enable automatic icache / dcache size in defconfig Changes for v3: - add detailed information for qca956x in commit message Changes for v4: - remove pre-configured network settings in ap152.h Changes for v5: - coding style cleanup
2019-04-12mips: mt76xx: linkit: Add mtd command supportStefan Roese
The new mtd is very useful so let's enable it on the LinkIt Smart 7688 as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Jiri Kastner <cz172638@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12config: stm32mp15: Enable STMFX supportPatrick Delaunay
Activate PINCTRL_STMFX and needed part for generic pincontrol PINCTRL_FULL, PINCONF. Increase pre-reloc memory for MALLOC (needed for each DM pinconfig node). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-12power: rename stpmu1 to official name stpmic1Patrick Delaunay
Alignment with kernel driver name & binding introduced by https://patchwork.kernel.org/cover/10761943/ to use the final marketing name = STPMIC1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-12stm32mp1: activated some configurationPatrick Delaunay
Add configuration useful for test - FIT support - MEMTEST - DFU - CACHE - TIME - TIMER Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12stm32mp1: activate FASTBOOT on eMMCPatrick Delaunay
activate Fastboot for eMMC on EV1 board (mmc1) $> sudo apt-get install android-tools-adb android-tools-fastboot $> fastboot -i 0x0483 getvar bootloader-version Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12stm32mp1: update bootcmdPatrick Delaunay
Clearly separate bootcmd for stm32mp1 board (bootcmd_stm32mp) and preboot management. That solve issue for fastboot continue command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12stm32mp1: cosmetic cleanup KconfigPatrick Delaunay
Cosmetic cleanup in mach-stm32mp Kconfig - remove duplicated SPL_DRIVERS_MISC_SUPPORT - update help for TARGET_STM32MP1 - set value for NR_DRAM_BANKS - remove one comment as DEBUG_UART is deactivated by default - include board Kconfig at the end of the file Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12stm32mp1: add trusted boot with TF-APatrick Delaunay
Add support of trusted boot, using TF-A as first stage bootloader, The boot sequence is BootRom >=> TF-A.stm32 (clock & DDR) >=> U-Boot.stm32 The TF-A monitor provides secure monitor with support of SMC - proprietary to manage secure devices (BSEC for example) - PSCI for power The same device tree is used for STMicroelectronics boards with basic boot and with trusted boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12ti: keystone2: Move CONFIG_ISW_ENTRY_ADDR to a common placeTom Rini
The ISW_ENTRY_ADDR Kconfig option under mach-omap2 isn't a SoC specific notion but rather "where is our previous stage loaded in memory?" option. Make use of this on ARCH_KEYSTONE rather than SPL_TEXT_BASE for our HS builds that are not using SPL anyhow. Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Andrew F. Davis <afd@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com?
2019-04-12configs: am335x_evm: Update VCI StringFaiz Abbas
Update VCI string to keep it compatible with legacy test setups. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-12configs: am335x_evm: Add Support for SPL_ETHFaiz Abbas
Add Support for booting from Ethernet. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12configs: am335x_evm: Reduce size of SPLFaiz Abbas
Make some room in SPL by getting rid of unnecessary configs. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12configs: am65x_evm_a53: Enable CONFIG_OF_BOARD_SETUPLokesh Vutla
Enable CONFIG_OF_BOARD_SETUP so that msmc sram dt nodes are updated correctly. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-04-12configs: ti_omap5_common: Add NAND environment settingsFaiz Abbas
Now that NAND is supported on DRA71x include various NAND environment settings Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit (git 2.34.1) at 2025-01-10 02:01:53 +0000