summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2018-12-09Merge git://git.denx.de/u-boot-marvellTom Rini
- Sync DDR training with Marvell code for Armada 38x by Chris - Misc updates to Armada 38x Helios4 board by Aditya
2018-12-08arm: mvebu: helios4: Enable SPI flash supportAditya Prayoga
Enable SPI flash support under U-Boot and SPL. The ENV size and offset, ported from U-Boot 2013.01 Marvell version: 2015_T1.0p16 To create U-Boot image for SPI flash, user would need to replace * CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC with CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI * CONFIG_ENV_IS_IN_MMC with CONFIG_ENV_IS_IN_SPI_FLASH Signed-off-by: Aditya Prayoga <aditya@kobol.io> Reviewed-by: Stefan Roese <sr@denx.de> Tested-By: Dennis Gilmore <dgilmore@redhat.com> Reviewed-By: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-08arm: mvebu: helios4: Reduce U-Boot image sizeAditya Prayoga
Remove unused I2C support in SPL and use simple_malloc functions to reduce SPL image size. Since Helios4 does not have any PCIe allocated on SerDes, remove PCI support. MTD layer on top of SPI flash is not needed, remove it also. Signed-off-by: Aditya Prayoga <aditya@kobol.io> Reviewed-by: Stefan Roese <sr@denx.de> Tested-By: Dennis Gilmore <dgilmore@redhat.com> Reviewed-By: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-08arm: mvebu: helios4: Enable mvebu GPIOAditya Prayoga
Make use of U-Boot's GPIO DM to control native GPIO and I2C IO expander. Signed-off-by: Aditya Prayoga <aditya@kobol.io> Reviewed-by: Stefan Roese <sr@denx.de> Tested-By: Dennis Gilmore <dgilmore@redhat.com> Reviewed-By: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-08arm: mvebu: helios4: Enable I2C and IO ExpanderAditya Prayoga
Enable Marvell I2C driver and I2C IO expander. Set default bus to external I2C bus. Define I2C aliases in device tree so it can be recognized by the driver. Signed-off-by: Aditya Prayoga <aditya@kobol.io> Reviewed-by: Stefan Roese <sr@denx.de> Tested-By: Dennis Gilmore <dgilmore@redhat.com> Reviewed-By: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-07Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
- Various axp209 fixes - Fixes for OLinuXino-A20-Lime2 / OLinuXino-A20-Lime2-eMMC
2018-12-07arm: sunxi: Reduce inrush current on Olimex OLinuXino-A20-Lime2-eMMCPriit Laes
The lime2 features a too large capacitor on the LDO3 output, which causes the PMIC to shutdown when enabling power. To be able to still boot up however, we must gradually enable power on LDO3 for this board. We do this by enabling both the inrush quirk and the maximum slope the AXP209 supports. Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-07arm: sunxi: Reduce inrush current on Olimex OLinuXino-A20-Lime2Olliver Schinagl
The lime2 features a too large capacitor on the LDO3 output, which causes the PMIC to shutdown when enabling power. To be able to still boot up however, we must gradually enable power on LDO3 for this board. We do this by enabling both the inrush quirk and the maximum slope the AXP209 supports. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-07serial: bcm6858: remove driver and switch to bcm6345Álvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-07arm: am335x-pdu001: Enable CONFIG_BLK and CONFIG_DM_MMCFelix Brack
This patch enables CONFIG_BLK as well as CONFIG_DM_MMC for the PDU001 board. It depends on Patrice Chotard's patch 'power: regulator: denied disable on always-on regulator' which prevents power cycling the vmmc supply. Without this patch the board will not boot as vmmc is unfortunately used by other board components, not just eMMC and micro SD card. Furthermore my patch 'dts: am335x-pdu001: Fix polarity of card detection input' is required to boot from external micro SD card. Without this patch no SD card will be detected and hence booting will fail. Signed-off-by: Felix Brack <fb@ltec.ch> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07test: dma: add dma-uclass testGrygorii Strashko
Add a sandbox DMA driver implementation (provider) and corresponding DM test. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-07configs: am335x_hs_evm_uart: Add YMODEM SPL support for UART bootAndrew F. Davis
UART booting requires YMODEM support. Add this here. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-06hwspinlock: add stm32 hardware spinlock supportBenjamin Gaignard
Implement hardware spinlock support for STM32MP1. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-06dm: Add Hardware Spinlock classBenjamin Gaignard
This is uclass for Hardware Spinlocks. It implements two mandatory operations: lock and unlock and one optional relax operation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-06configs: stm32f746-disco: Fix stm32f746-disco bootPatrice Chotard
Since commit 8f651ca60ba1 ("pinctrl: stm32: Add get_pins_count() ops") stm32f746-disco can't boot. This is due to new memory allocation into STM32 pinctrl driver, increase SYS_MALLOC_F_LEN from 0xC00 to 0xE00. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-06rockchip: rk3399: Add Ficus EE board supportManivannan Sadhasivam
Add board support for Ficus EE board from Vamrs. This board utilizes common Rock960 family support. Following peripherals are tested and known to work: * Gigabit Ethernet * USB 2.0 * MMC Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> [Reworked based on common Rock960 family support] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-06rockchip: rk3399: Add Rock960 CE board supportManivannan Sadhasivam
Add board support for Rock960 CE board from Vamrs. This board utilizes common Rock960 family support. Following peripherals are tested and known to work: * USB 2.0 * MMC This commit also adds DDR configuration for LPDDR3-2GiB-1600MHz which is being used on the board. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-05riscv: Add S-mode defconfigs for QEMU virt machineAnup Patel
This patch adds S-mode defconfigs for QEMU virt machine so that we can run u-boot in S-mode on QEMU using M-mode runtime firmware (BBL or equivalent). Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2018-12-04ARM: dts: Turn ULCB into Multi-DTB configMarek Vasut
Bundle DTBs for R8A7795, R8A7796 ULCB variants into single U-Boot build and let U-Boot choose between them based on the CPU model. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-04ARM: dts: Turn Salvator-X into Multi-DTB configMarek Vasut
Bundle DTBs for R8A7795, R8A7796, R8A77965 Salvator-X variants into the single U-Boot build and let U-Boot choose between them based on the CPU model. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-03Merge tag 'xilinx-for-v2019.01' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx changes for v2019.01 microblaze: - Use default functions for memory decoding - Showing model from DT zynq: - Fix spi flash DTs - Fix zynq_help_text with CONFIG_SYS_LONGHELP - Tune cse/mini configurations - Enabling cse/mini testing with current targets zynqmp: - Enable gzip SPL support - Fix chip detection logic - Tune mini configurations - DT fixes(spi-flash, models, clocks, etc) - Add support for OF_SEPARATE configurations - Enabling mini testing with current targets - Add mini mtest configuration - Some minor config setting nand: - arasan: Add subpage configuration net: - gem: Add 64bit DMA support
2018-12-03Merge tag 'signed-rpi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for rpi - 2018-12-03 A few Raspberry Pi specific changes this time: - Allow 2nd MMC device - Support RPi 3 Model A+ - Allow UUID to find filesystem
2018-12-03Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-12-03 This release is fully packed with lots of glorious improvements in UEFI land again! - Make PE images more standards compliant - Improve sandbox support - Improve correctness - Fix RISC-V execution on virt model - Honor board defined top of ram (fixes a few boards) - Imply DM USB access when distro boot is available - Code cleanups
2018-12-03Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- MMC fixes for R-Car Gen3
2018-12-03board: MCR3000: migrate to DM_SERIALChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-12-03board: MCR3000: use new DM watchdogChristophe Leroy
This patch switches MCR3000 board to the new DM watchdog. The change in u-boot.lds is because MCR3000.o grows a bit with this patch and doesn't fit anymore below env_offset on some versions of GCC. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-12-03board: MCR3000: Activate CONFIG_DM and CONFIG_OF_CONTROLChristophe Leroy
Add mcr3000 device tree and activate CONFIG_DM and CONFIG_OF_CONTROL Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-12-03configs: sandbox: enable padding pss for rsa signaturePhilippe Reynes
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03Kconfig: Migrate CONFIG_RTC_M41T62 define to KconfigLukasz Majewski
This patch moves the RTC M41T62 config define to Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03arm: baltos: migrate Ethernet PHYs configuration to KconfigYegor Yefremov
Remove CONFIG_PHY_ATHEROS and CONFIG_PHY_SMSC from defconfig and select them in Kconfig. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03arm: baltos: move CONFIG_SYS_NAND_U_BOOT_OFFS to defconfigYegor Yefremov
Also get rid of CONFIG_SYS_NAND_SPL_KERNEL_OFFS as SPL_OS_BOOT feature won't be used. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03arm: baltos: move the board to CONFIG_BLKYegor Yefremov
Use DM for both MMC and USB subsystems and use dedicated DTS for U-Boot configuration. Disable SPL support for GPIO and remove EVMSK leftover for DDR power control via GPIO. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03arm64: zynqmp: Add new header file for zcu104 RevCT Karthik Reddy
Created a new header file for zcu104 RevC board and added below configurations to use MAC address from EEPROM. CONFIG_ZYNQ_GEM_EEPROM_ADDR CONFIG_ZYNQ_EEPROM_BUS Added CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 to xilinx_zynqmp_zcu104_revC_defconfig Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-12-03ARM: rmobile: Enable MMC HS400 on Salvator-X, ULCB, EbisuMarek Vasut
Enable the HS400 support code on H3, M3W, M3N Salvator-X(S) and ULCB boards as well as E3 Ebisu board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-02ARM: rpi_*_defconfig: Add support to find UUID for filesystemOtavio Salvador
The most generic way of having a stable boot behavior is to rely on UUID instead of device names for root partition, so the order of probing does not cause issues with booting. This enables the `CMD_FS_UUID` for following defconfig files: - rpi_0_w_defconfig - rpi_2_defconfig - rpi_3_32b_defconfig - rpi_3_defconfig - rpi_defconfig Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02efi_loader: unset CONFIG_EFI_LOADER on vf610twrHeinrich Schuchardt
vf610twr_defconfig and vf610twr_nand_defconfig suffer from tight memory restrictions. Disable CONFIG_EFI_LOADER for these boards. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-01Merge tag 'for-master-20181130' of git://git.denx.de/u-boot-rockchipTom Rini
Improvements: - RK3188 USB-UART functionality - errors triggering a hard-stop in SPL on the RK3399 are reported - Rockchip RV1108 (SoC) support - MicroCrystal RV3029 (RTC) DM driver Fixes: - RK3188 early UART setup - limit SD-card frequency to 40MHz on the RK3399-Q7 - MIPI fixes - RK3399 CPUB clock initialisation
2018-11-30Merge tag 'mips-pull-2018-11-30' of git://git.denx.de/u-boot-mipsTom Rini
- MIPS: MT76xx: minor fixes and updates to gardena-smart-gateway board
2018-11-30rockchip: rock: remove TPL_TINY_MEMSETKever Yang
The RK3188 rock board does not need TPL: remove TPL_TINY_MEMSET from config. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [Fixed up commit message:] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-11-30mips: mt76xx: gardena-smart-gateway: Misc updates to defconfigStefan Roese
The following changes are made: - Add default bootcmd which can be used for initial start-up - Setup necessary MTD parts for Linux compatibility Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-30arm: mvebu: mcbin: configs: enable network driverBaruch Siach
Enable the mvpp2 Ethernet driver and the Marvell Ethernet PHY driver. This makes the Macchiatobin 1Gb Ethernet interface usable. Cc: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-30arm: kirkwood: configs: dreamplug: Convert to DM_SPIChris Packham
Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-30arm: kirkwood: configs: ds109: Convert to DM_SPIChris Packham
Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-30arm: kirkwood: configs: Convert Allied Telesis boards to DM_SPIChris Packham
Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-30arm: mvebu: configs: armada8k: use 2 DRAM banksBaruch Siach
Commit 2b4d964718c0 ("arm64: mvebu: a8k: autodetect RAM size") added an ATF query to get the detected RAM size on Armada 8K platforms. To be usable we must have 2 DRAM banks. Set Armada 8K configurations to 2 banks. Cc: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-30arm64: zynqmp: Wire mini-emmc1 configuration with zcu102Michal Simek
For testing purpose use zcu102 which has SD at controller 1 and this can be used for testing this mini configuration. U-Boot 2018.11-00279-gdc482e7ee092 (Nov 30 2018 - 10:22:56 +0100) Model: ZynqMP MINI EMMC1 Board: Xilinx ZynqMP DRAM: 512 MiB EL Level: EL3 MMC: sdhci@ff170000: 0 In: dcc Out: dcc Err: dcc ZynqMP> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-30arm64: zynqmp: Wire mini-emmc0 configuration with zcu100Michal Simek
For testing purpose use zcu100 which has SD at controller 0 and this can be used for testing this mini configuration. U-Boot 2018.11-00281-gc5d48466e76e (Nov 30 2018 - 10:41:05 +0100) Model: ZynqMP MINI EMMC0 Board: Xilinx ZynqMP DRAM: 512 MiB EL Level: EL3 MMC: sdhci@ff160000: 0 In: dcc Out: dcc Err: dcc ZynqMP> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-30arm64: zynqmp: Add mini mtest configurationMichal Simek
This configuration is useful when you want to run small u-boot and perform DDR memory test to make sure that DDR is properly configured. It is use for board bringup because alternative u-boot memory tests is quite good. Configuration is running out of OCM. As is done for others mini configurations 0x80 bytes for variables is enough and only default variables are stored there. Alternative memtest is enabled and also 2GB of DDR via DTS files. Configuration is enabling ZYNQMP_PSU_INIT_ENABLED and include psu_init() from zcu102 for testing purpose. In case of size issue this can be moved to SPL configuration as is done for mini_qspi configuration but it is not a problem now. Log: U-Boot 2018.11-00268-gbd58b8ba8915 (Nov 29 2018 - 15:33:35 +0100) Model: ZynqMP MINI Board: Xilinx ZynqMP DRAM: WARNING: Initializing TCM overwrites TCM content 2 GiB EL Level: EL3 In: dcc Out: dcc Err: dcc ZynqMP> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-30arm64: zynqmp: Use minimal size for environment variablesMichal Simek
There is no reason to have huge space for variables because none is using that. But there are some which are setup automatically. baudrate=115200 fdtcontroladdr=ffffa0d0 stderr=dcc stdin=dcc stdout=dcc Environment size: 72/124 bytes Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-30arm64: zynqmp: Do not save variables about boardMichal Simek
No reason to save this data to environment. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-01-25 14:52:37 +0000