summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2018-08-07Board: ls1088ardb: Enable PCIe config for Secure boot defconfigsVinitha V Pillai
Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-04Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2018-08-03configs: stm32f469-disco: Enable CONFIG_BLKPatrice Chotard
CONFIG_BLK config flag becomes mandatory, enable it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-03configs: stm32f746-disco: Enable CONFIG_BLKPatrice Chotard
CONFIG_BLK config flag becomes mandatory, enable it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-03configs: stm32f429-evaluation: Enable CONFIG_BLKPatrice Chotard
CONFIG_BLK config flag becomes mandatory, enable it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-03configs: stm32mp15: enable ADCFabrice Gasnier
Enable ADC on stm32mp15. - CONFIG_CMD_ADC - CONFIG_STM32_ADC Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-31board: sun50i: h6: Add OrangePi One Plus initial supportJagan Teki
OrangePi One Plus is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - 1Gbps GMAC via RTL8211 - USB 2.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-07-31sunxi: add support for Pine H64 boardIcenowy Zheng
Pine H64 is a SBC with Allwinner H6 SoC produced by Pine64. It features 1GiB/2GiB/4GiB(3GiB usable) DRAM, two USB 2.0 ports, one USB 3.0 port and a mPCIE slot. Add support for it. The device tree is from Linux next-20180720. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31sunxi: enable SATA on Banana Pi M2 BerrySimon Baatz
Banana Pi M2 Ultra and M2 Berry are very similar boards. SATA can be enabled exactly the same as for M2 Ultra introduced in commit daa8b75a5527 ("sunxi: enable SATA on Banana Pi M2 Ultra"). Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-31AXS10x: add spi flash supportEugeniy Paltsev
AXS10x boards have n25q512 spi flash IC, so add corresponding nodes to device tree and enaple corresponding options in defconfig. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-28configs: omap3_logic: Remove USB Storage and enable CONFIG_BLKAdam Ford
With the pending requirement for CONFIG_BLK, this patch removes the USB_STORAGE option which assumes that DM_USB is enabled, but isn't yet available for the omap2340 musb glue among other issues. Once the USB issues are resolved, a future patch can enable them again. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-28sandbox: compile both TPM stack versions and driversMiquel Raynal
Now that TPMv1 and TPMv2 can be compiled at the same time, let's compile them both with Sandbox as well as both drivers (and, it is already implied in Kconfig: both commands). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-26armv8: ls1046ardb: Add falcon mode for for QSPI bootYork Sun
A new defconfig is introduced to support SPL boot from QSPI NOR flash. This is to support falcon mode for faster booting into Linux. Signed-off-by: York Sun <york.sun@nxp.com>
2018-07-26arm64: ls1012a: enable DM support for sataYuantian Tang
Enable related configs to support sata DM feature. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: ls1046ardb: ls1046aqds: Move SPL macros to defconfigYork Sun
Instead of defining Kconfig macros in header file, move them to defconfig files. Signed-off-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: ls2088ardb: Move CONFIG_SPI_FLASH, CONFIG_SPI_FLASH_SPANSION to defconfigAshish Kumar
Move CONFIG_SPI_FLASH_SPANSION, CONFIG_SPI_FLASH, to defconfig. Also disable disable 4K erase size option. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26configs: Disable 4k erase sector size for spansion "s25fs512s" flashAshish Kumar
4K erase size is used only in case of hydrid mode which is not supported on any NXP platform with flash "s25fs512s". Supported mode is uniform sector, with erase size 256kiB. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26LS1043ARBD: Fix SD Boot issue with PPAVinitha V Pillai
CONFIG_SPL_FSL_LS_PPA is needed only in case of falcon boot Support for this is not present in PPA currently, so removing the default option from defconfig Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-24Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini
2018-07-25ARM: uniphier: enable MTD partition and UBIMasahiro Yamada
Enable "mtdparts" and "ubi" commands for uniphier_v8_defconfig to use UBI on NAND devices. Enable only "mtdparts" for uniphier_{v7,ld4_sld8}_defconfig because enabling UBI would increase 170KB, which would be memory footprint problem. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-24configs: am3517-evm: Setup NAND bootingAdam Ford
The NAND offsets for the kernel and U-Boot were missing. This patch sets up the offsets so the AM3517-EVM can boot from NAND when DIP switches S7:1 and S7:4 are to the OFF position Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-24omap3: beagle: re-enable EFI support after the following commit removed it ↵Guillaume GARDET
by mistake: commit d233ccb1d84b901f7e23e6d9b4f2c6a57198b23b ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND layout Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Derald D. Woods <woods.technical@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-07-23ARM: configs: omap3_logic: remove Legacy OMAP3 USB driverAdam Ford
Only the MUSB driver is currently supported on the omap3_logic boards. The driver is using the new-musb and not the legacy version, so this patch removes the dead code references. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23Convert CONFIG_DA8XX_GPIO to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_DA8XX_GPIO Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23m68k: m5253evbe: Remove this boardTom Rini
The m5253evbe board has been marked as orphan since June of 2014 and should have been dropped a while ago. Do so now. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-23Merge branch 'master' of git://git.denx.de/u-boot-imxTom Rini
trini: Update colibri-imx6ull to use Kconfig for mtdparts related options. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-23ARM: dh_imx6: enable GigaDevice, Macronix, and Winbond SPI Flash support in ↵Ludwig Zenz
Kconfig In preparation for delivery bottlenecks, enable support for GigaDevice, Macronix, and Winbond nor flash chips. Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.de>
2018-07-23imx: i.mx6q: imx6q_logic: Migrate to SPL and enable SDPAdam Ford
Since the vast majority of i.MX6 boards are migrating to SPL, this patch converts im6q_logic to SPL and enables the SDP for loading SPL and u-boot.img over USB. The Falcon mode only supports NAND flash as of now due to limited space/RAM, but all i.MX6D/Q SOM's from Logic PD have internal NAND from which to boot. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23pico-imx7d: Add new pico-pi configOtavio Salvador
The new config skips the boot menu which asks which board is in use. This is useful to allow direct booting of image without user iteration. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: Enable auxiliary code supportOtavio Salvador
This enables the "bootaux" command so a firmware can be loaded inside the M4 MCU. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: Allow default fdtfile to be overridden by defconfigOtavio Salvador
This allow the addition of extra default configurations for each baseboard, removing the boot menu when user boots for the first time. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: Enable CONFIG_ARMV7_BOOT_SEC_DEFAULTFabio Estevam
Currently the CAAM driver fails to be probed: caam 30900000.caam: Entropy delay = 3200 caam 30900000.caam: failed to acquire DECO 0 caam 30900000.caam: failed to instantiate RNG CAAM needs to be initialized in secure world, so enable CONFIG_ARMV7_BOOT_SEC_DEFAULT to allow the driver to probe successfully. Tested with kernel mainline version 4.17.2. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: Add Falcon mode supportFabio Estevam
Falcon mode boots the kernel directly from SPL, without loading the full U-Boot. As pico-imx7d does not have a GPIO for selecting Falcon versus normal mode, enter in Falcon mode when the customer selects the CONFIG_SPL_OS_BOOT option in menuconfig. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: Add bootmenu to choose the baseboardOtavio Salvador
Currently the baseboards do not offer a way to autodetect which one is in use, so we ask the user if no value has been set. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: Add SPL supportFabio Estevam
Convert pico-imx7d to SPL support. There are two variants of pico-imx7d SOMs: - One with 512MB of RAM - One with 1GB of RAM The 512MB module contains two Hynix H5TC2G63GFR-PBA. The 1GB module contains two Hynix H5TC4G63GFR-PBA. The RAM size is determined in runtime by reading GPIO1_12. While at it, also add USB Serial Download mode support as it is very helpful for loading SPL and u-boot.img via imx_usb_loader. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: Add fastboot supportFabio Estevam
fastboot tool is a convenient way to flash the eMMC, so add support for it. Examples of usages: On the pico-imx7d U-Boot prompt: => fastboot 0 On the Linux PC connected via USB: 1. Retrieving the U-Boot version $ sudo fastboot getvar bootloader-version -i 0x0525 bootloader-version: U-Boot 2018.07-rc1-03888-gde846f9 finished. total time: 0.000s 2. Resetting the board $ sudo fastboot reboot -i 0x0525 (this causes the pico-imx7d to reboot) Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: Add default DFU targetsOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: Add GPT partitioning supportOtavio Salvador
This allow the use of: > run setup_emmc inside of the U-Boot prompt to do the partitioning of the disk. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23pico-imx7d: Fix common distro configuration behaviorOtavio Salvador
This sets DISTRO_CONFIG and BOOTCOMMAND, as well as add a `finduuid` environment helper to allow it to properly work with Yocto Project and other distributions using extlinux autogenerated configuration files. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23arm: imx7d: cl-som-imx7: sf: support all SF typesUri Mashiach
Enable the support for all SPI flash types. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Signed-off-by: Yaniv Levinsky <yaniv.levinsky@compulab.co.il>
2018-07-23board: toradex: add Colibri iMX6ULL supportStefan Agner
Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-22Convert CONFIG_MTD_PARTITIONS et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_MTD_PARTITIONS CONFIG_MTD_DEVICE Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-21configs: Make NAND_BOOT and ONENAND_BOOT imply NANDAdam Ford
Some boards indicate support from booting NAND or ONENAND booting, but don't enable the CONFIG_NAND. This makes those boards imply NAND which will make enabling other flags that are dependent on CONFIG_NAND possible and easier to migrate. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-21Convert CONFIG_NAND_DAVINCI to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_NAND_DAVINCI Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-21Convert CONFIG_NAND_ATMEL to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_NAND_ATMEL Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-21Convert CONFIG_NAND_LPC32XX_SLC to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_NAND_LPC32XX_SLC Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-20Merge branch 'master' of git://git.denx.de/u-boot-rockchipTom Rini
2018-07-21rockchip: utilize CONFIG_DEFAULT_FDT_FILEKlaus Goger
Currently the fdtfile environment variable is set to CONFIG_DEFAULT_DEVICE_TREE which is іnternally used as U-Boot devicetree source. The OS can use a different filename and Kconfig gives us the ability to select a default devicetree via CONFIG_DEFAULT_FDT_FILE. This also gives user configuring U-Boot via menuconfig the behaviour someone would expect. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Tested-By: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-21smartweb: use SPL_TINY_MEMSETPhilipp Tomsich
The SPL code for smartweb is close to its limit and adding a few extra instructions to SPL will cause it to overrun its sram allotement (thus causing build failures). To allow adding the 'spl_perform_fixups' extension point to SPL, we'll enable SPL_TINY_MEMSET for smartweb. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Series-cc: trini
2018-07-20Merge git://git.denx.de/u-boot-x86Tom Rini
generated by cgit (git 2.34.1) at 2024-12-29 20:08:52 +0000