summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2019-05-21mpc83xx: Migrate CONFIG_LCRR_* to KconfigMario Six
Migrate the CONFIG_LCRR_* settings to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Migrate SPCR to KconfigMario Six
Migrate the SPCR setting to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Migrate arbiter config to KconfigMario Six
Migrate the arbiter configuration to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc8308: Migrate system io config to KconfigMario Six
Migrate the system IO configuration setting to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Migrate CONFIG_SYS_IMMR to KconfigMario Six
Migrate CONFIG_SYS_IMMR to Kconfig for MPC83xx. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Migrate HID config to KconfigMario Six
Mirate the HID configuration settings to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Migrate CONFIG_SYS_{BR, OR}*_PRELIM to KconfigMario Six
Migrate the BR/OR settings to Kconfig. These must be known at compile time, so cannot be configured via DT. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Migrate LBLAW_* to KconfigMario Six
The LBLAW_* values determine the window configuration of the memory controller. Hence, they must be known at compile time, and cannot be implemented in the DT mechanism. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Migrate BATS config to KconfigMario Six
The BATs (block address translation registers) determine the initial memory window mappings. Hence, they must be known at compile time and cannot be implemented in the DT mechanism. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21powerpc: Migrate HIGH_BATS to KconfigMario Six
Migrate the CONFIG_HIGH_BATS variable to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Kconfig: Migrate HRCW to KconfigMario Six
The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Get rid of CONFIG_83XX_CLKINMario Six
MPC83xx uses CONFIG_83XX_CLKIN instead of CONFIG_SYS_CLK_FREQ to set the system clock. To migrate the architecture, we can replace CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ. To do this * replace all occurrences of CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ * set CONFIG_SYS_CLK_FREQ to the old value of CONFIG_83XX_CLKIN in all MPC83xx config files Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Migrate legacy PCI options to KconfigMario Six
The MPC83xx include files contain some settings of the PCI subsystem. Migrate these to Kconfig until a proper DM PCI driver exists. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21MPC8349ITX: Migrate to CONFIG_TARGET_MPC8349ITXMario Six
Use the proper CONFIG_TARGET_MPC8349ITX Kconfig option to replace the CONFIG_MPC8349ITX ad-hoc config option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Make distinct MPC8349EMDS_SDRAM boardMario Six
The MPC8349EMDS config file contains config options to enable SDRAM support. To keep this ability after the Kconfig migration, create a new MPC8349EMDS_SDRAM board that enables the SDRAM support and remove the SDRAM support from the original board. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Make distinct caddy2 configMario Six
vme8349.h contains two separate boards: The vme8349 itself, and the caddy2 board. The caddy2 board is chosen by setting certain config variables. Create a proper config file for the caddy2 board to make Kconfig migration easier. Furthermore, simplify the vme8349 and caddy2 configs by keeping only the options necessary for each board. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Make distinct MPC8313ERDB targetsMario Six
MPC8313ERDB has the option of either enabling NOR or NAND boot in its config file (by commenting out certain #ifdefs). To keep this ability after migrating options to Kconfig, we introduce two MPC8313ERDB configs: one for NOR, and one for NAND. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20keymile: Make distinct kmeter1, and kmcoge5ne configsMario Six
The kmeter1, and kmcoge5ne boards also build from the same config file with #ifdef logic. Create a separate include config for each board with the #ifdef logic resolved as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20keymile: Make distinct kmsupx5, tuge1, kmopti2, and kmtepr2 configsMario Six
The kmsupx5, tuge1, kmopti2, and kmtepr2 boards all build from the same include config file with lots of #ifdef logic. To ease Kconfig migration, create new config include files for these boards, and resolve the #ifdef logic as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20keymile: Make distinct kmtegr1, kmvect1, suvd3 configsMario Six
The kmtegr1, kmvect1, and suvd3 boards all use the same config include file with lots of #ifdefs in it. The Kconfig migation will become easier if we get rid of these #ifdefs first. Hence, create distinct config include files for these boards, and unwind the #ifdef logic in these config files to only include the options necessary for each board. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-19Merge git://git.denx.de/u-boot-x86Tom Rini
- Allow coreboot to process unhandled tags - Enable NVMe on QEMU x86_64 target
2019-05-19x86: qemu-x86_64: Enable NVMeBin Meng
NVMe was turned on in qemu-x86 but somehow we missed it for 64-bit. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-18ARM: da850evm: Enable block cache during SPLAdam Ford
There appears to be enough RAM to support cache in SPL. This pach enables block cache in SPL. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-18ARM: omap3_logic/omap35_logic: Enable GPIO in SPLAdam Ford
The MMC controller enabled card detect, so this patch enables the GPIO driver in SPL to support it. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-18configs: bcm968580 disable CONFIG_CMD_BOOTEFI_SELFTESTHeinrich Schuchardt
Configuration option CONFIG_CMD_BOOTEFI_SELFTEST is useful for the development of the UEFI sub-system. For production it is not needed. Remove CONFIG_CMD_BOOTEFI_SELFTEST from bcm968580xref_ram_defconfig. Suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-18configs: bcm963158 disable CONFIG_CMD_BOOTEFI_SELFTESTHeinrich Schuchardt
Configuration option CONFIG_CMD_BOOTEFI_SELFTEST is useful for the development of the UEFI sub-system. For production it is not needed. Remove CONFIG_CMD_BOOTEFI_SELFTEST from bcm963158_ram_defconfig. Suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-18CONFIG_SPL_SYS_[DI]CACHE_OFF: addTrevor Woerner
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances where these configuration items are conditional on SPL. This commit adds SPL variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates the configurations as required. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Trevor Woerner <trevor@toganlabs.com> [trini: Make the default depend on the setting for full U-Boot, update more zynq hardware] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-18CONFIG_SYS_[DI]CACHE_OFF: convert to KconfigTrevor Woerner
CONFIG_SYS_[DI]CACHE_OFF had been partially converted to Kconfig parameters; only for the ARC architecture. This patch turns these two parameters into Kconfig items everywhere else they are found. All of the include/configs/* and defconfig changes in this patch are for arm machines only. The Kconfig changes for arc, nds32, riscv, and xtensa have been included since these symbols are found in code under arch/{arc,nds32,riscv,xtensa}, however, no currently-defined include/configs/* or defconfigs for these architectures exist which include these symbols. These results have been confirmed with tools/moveconfig.py. Acked-by: Alexey Brodkin <abrodkin@snopsys.com> Signed-off-by: Trevor Woerner <trevor@toganlabs.com> [trini: Re-migrate for a few more boards] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-16Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini
- arndale fixes
2019-05-16Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- SoCFPGA DT and reset cleanup, AE MCVEVK board support.
2019-05-16configs: arndale: Use appropriate driver for Asix AX88760Krzysztof Kozlowski
Arndale board has an Asix AX88760 USB 2.0 Hub and Fast Ethernet combo. The appropriate driver for it is USB_ETHER_ASIX. The mistake probably came from misinterpretation of commit e9954b867ce0 ("usb: eth: add ASIX AX88179 DRIVER") which was tested on RECS5250 COM module. This module indeed has Exynos5250 and some similarities with Arndale 5250 board but the USB/Ethernet chip used there is apparently different. Fixes: f58ad98a621c ("usb: net: migrate USB Ethernet adapters to Kconfig") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-05-16arm: exynos: arndale: Remove unused CONFIG_DM_I2C_COMPATKrzysztof Kozlowski
The CONFIG_DM_I2C_COMPAT was introduced in include/configs/exynos5-common.h in commit 189d80166b31 ("exynos5: enable dm i2c") and then it propagated up to configs/arndale_defconfig. However since beginning the Arndale board (Exynos5250) was not using I2C. In fact, the Arndale board is not configuring its PMIC (S5M8767) which uses I2C bus. This setting can be thus safely removed to fix build warning: This board uses CONFIG_DM_I2C_COMPAT. Please remove (possibly in a subsequent patch in your series) before sending patches to the mailing list. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-05-15Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini
- micrel, ti PHY fixes - rtl8169, mtk-eth fixes
2019-05-15Merge tag 'u-boot-stm32-mcu-20190514' of https://github.com/pchotard/u-bootTom Rini
STM32 MCUs update: _ Add MPU region for SPI NOR memory mapped region _ Add missing QSPI flash compatible for STM32 F7 boards _ Update spi-tx-bus-width and spi-rx-bus-width properties _ Add QSPI support for STM32F469 Discovery board
2019-05-14net: phy: micrel: Allow KSZ8xxx and KSZ90x1 to be used togetherJames Byrne
Commit d397f7c45b0b ("net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers") separated the KSZ8xxx and KSZ90x1 drivers and warns that you shouldn't select both of them due to a device ID clash between the KSZ9021 and the KS8721, asserting that "it is highly unlikely for a system to contain both a KSZ8000 and a KSZ9000 PHY". Unfortunately boards like the SAMA5D3xEK do contain both types of PHY, but fortunately the Linux Micrel PHY driver provides a solution by using different PHY ID and mask values to distinguish these chips. This commit contains the following changes: - The PHY ID and mask values for the KSZ9021 and the KS8721 now match those used by the Linux driver. - The warnings about not enabling both drivers have been removed. - The description for PHY_MICREL_KSZ8XXX has been corrected (these are 10/100 PHYs, not GbE PHYs). - PHY_MICREL_KSZ9021 and PHY_MICREL_KSZ9031 no longer select PHY_GIGE since this is selected by PHY_MICREL_KSZ90X1. - All of the relevant defconfig files have been updated now that PHY_MICREL_KSZ8XXX does not default to 'Y'. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-14arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] boardWolfgang Grandegger
Re-add support for Aries Embedded MCV SoM, which is CycloneV based and the associated MCVEVK and MCVEVP baseboard. The board can boot from eMMC. Ethernet and USB is supported. The Aries Embedded boards have been removed with commit 03b54997d568 ("board/aries: Remove"). I will now take care of them. The device-tree files are from mainline Linux commit e93c9c99a629 ("Linux v5.1)". Signed-off-by: Wolfgang Grandegger <wg@aries-embedded.de> CC: Marek Vasut <marex@denx.de> CC: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-13Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- A10 FPGA programming support, Gen5 livetree conversion
2019-05-10configs: stratix10: Enable CONFIG_SPI_FLASH_USE_4K_SECTORSLey Foon Tan
Fix SPI flash environment erase size error. CONFIG_ENV_SECT_SIZE is set to 4KB. Enable CONFIG_SPI_FLASH_USE_4K_SECTORS to allow erase one environment sector. Fix error below: SOCFPGA_STRATIX10 # saveenv Saving Environment to SPI Flash... SF: Detected mt25qu02g with page size 256 Bytes, erase size 64 KiB, total 256 MiB Erasing SPI flash...SF: Erase offset/length not multiple of erase size Failed (-22) Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-05-10ARM: socfpga: Synchronize the configuration for A10 SoCDKTien Fong Chee
Update the default configuration file to enable the necessary functionality the get the kit working. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-10ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDKTien Fong Chee
Update the default configuration file to enable the necessary functionality to get the SoCFPGA loadfs driver support. This would enable the implementation of programming bitstream into FPGA from MMC. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-10sh: shmin: Remove the boardMarek Vasut
Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10sh: ms7720se: Remove the boardMarek Vasut
Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10sh: mpr2: Remove the boardMarek Vasut
Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Mark Jonas <mark.jonas@de.bosch.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10sh: rsk7269: Remove the boardMarek Vasut
Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10sh: rsk7264: Remove the boardMarek Vasut
Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10sh: rsk7203: Remove the boardMarek Vasut
Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-09Merge tag 'rockchip-for-v2019.07-rc1' of git://git.denx.de/u-boot-rockchipTom Rini
Improvements and new features: - split more rockchip pinctrl_core feature into per SoC - enable TPL for evb-rk3399 board - enable TPL/SPL for evb-px5 board - enable TPL and OP-TEE support for evb-rk3229 - update fix in arm common assembly start code for rockchip header file - update default SPL_FIT_GENERATOR for rockchip - rk3399 boards update to use '-u-boot.dtsi' - add new rk3399 boards: Nanopi M4, Nanopc T4 - enable sound for chromebook_minnie
2019-05-09Merge git://git.denx.de/u-boot-marvellTom Rini
- DM updates for multiple MVEBU boards (Stefan) - Add CRS305-1G-4S board (Luka) - Enable MMC in SPL on clearfog (Baruch)
2019-05-09rockchip: rk3399: Add Nanopc T4 board supportJagan Teki
Add initial support for Nanopc T4 board. Specification - Rockchip RK3399 - Dual-Channel 4GB LPDDR3-1866 - SD card slot - 16GB eMMC - RTL8211E 1Gbps - AP6356S WiFI/BT - HDMI In/Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - DC 12V/2A Commit details of rk3399-nanopc-t4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: Add NanoPC-T4 IR receiver" (sha1: 95658e21b1707ad7844f873db2fdaa295109a5a3) Tested-by: Daniel Gröber <dxld@darkboxed.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-09rockchip: rk3399: Add Nanopi M4 board supportJagan Teki
Add initial support for Nanopi M4 board. Specification - Rockchip RK3399 - Dual-Channel 4GB LPDDR3-1866 - SD card slot - eMMC socket - RTL8211E 1Gbps - AP6356S WiFI/BT - HDMI In/Out, DP, MIPI DSI/CSI - USB 3.0 x4 - USB Type C power and data - GPIO1, GPIO2 expansion ports - DC5V/3A Commit details of rk3399-nanopi-m4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: Refine nanopi4 differences" (sha1: c62ffaf5026d0b7633e62b2cea8450b5543c349a) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
generated by cgit (git 2.34.1) at 2024-12-26 01:34:28 +0000