summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2020-05-04configs: P1010RDB: Enable PCIe driverHou Zhiqiang
Enable the DM PCIe driver in P1010RDB defconfigs. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04powerpc: Enable device tree support for P1010RDBHou Zhiqiang
Add device tree for P1010RDB boards and enable CONFIG_OF_CONTROL so that device tree can be compiled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04configs: T1042D4RDB: enable DM_I2C and DM_RTCBiwen Li
This enables DM_I2C and DM_RTC in T1042D4RDB defconfigs, except T1042D4RDB SECURE_BOOT defconfig Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04configs: T2080: enable DM_I2CBiwen Li
This enables DM_I2C in T2080 defconfigs Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04configs: T4240RDB: enable DM_I2CBiwen Li
This enable DM_I2C in T4240RDB defconfigs Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04configs: MPC8548CDS: enable DM_I2CBiwen Li
This enables DM_I2C in MPC8548CDS defconfigs Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04configs: P1010: Enable DM_I2C and DM_RTCBiwen Li
Enable DM_I2C and DM_RTC in P1010RDB defconfigs, except P1010RDB SECBOOT defconfigs. Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04configs: T1024RDB: enable DM_I2C and DM_RTCBiwen Li
This enables DM_I2C and DM_RTC in T1024RDB defconfigs, except T1024RDB SECURE_BOOT defconfig Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04configs: P4080DS: enable DM_I2CBiwen Li
This enables DM_I2C in P4080DS defconfigs, except P4080DS SRIO_PCIE_BOOT and SECURE_BOOT defconfigs Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04configs: P3041DS: enable DM_I2CBiwen Li
This enables DM_I2C in P3041DS defconfigs, except P3041DS SECURE_BOOT and SRIO_PCIE_BOOT defconfig Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04config: P2041RDB: enable DM_I2CBiwen Li
This enables DM_I2C in P2041RDB defconfig, except P2041RDB SRIO_PCIE_BOOT and SECURE_BOOT defconfigs Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04configs: P2020RDB: enable DM_I2C and DM_RTCBiwen Li
This enables DM_I2C and DM_RTC in P2020RDB defconfigs Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04configs: P1020RDB: enable DM_I2C and DM_RTCBiwen Li
This enables DM_I2C and DM_RTC in P1020RDB defconfigs Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04configs: P5040DS: enable DM_I2CBiwen Li
This enable DM_I2C in P5040DS defconfigs, except P5040DS SECURE_BOOT defconfigs Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-01Revert "imx: defconfig: Enable CONFIG_SPL_FORCE_MMC_BOOT"Harald Seiler
CONFIG_SPL_FORCE_MMC_BOOT was removed in a previous patch as its behavior is the correct one in all cases. Remove all uses of it from defconfigs. This reverts commit 3201e5b444ae3a13aa31e8b5101ad38d7ff0640d and removes CONFIG_SPL_FORCE_MMC_BOOT from the imx28_xea defconfig. Signed-off-by: Harald Seiler <hws@denx.de>
2020-05-01arm: enable distro boot for bananapi-r2Matthias Brugger
This patch enables distro boot for the bananapi-r2, based on a MediaTek mt7623n. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-01arm: imx: Add support for Google's Coral Dev BoardAlifer Moraes
Add initial support for Google's Coral Dev Board based on i.MX8MQ. https://coral.ai/products/dev-board The Phanbell naming has been used here to match the naming convention used in Google's U-Boot source tree: https://coral.googlesource.com/uboot-imx/ Co-developed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com> Tested-by: Marco Franchi <marcofrk@gmail.com>
2020-05-01ARM: imx8m: Fix reset in SPL on Toradex iMX8MM VerdinMarek Vasut
Board files should not re-implement do_reset() to work around this function not being defined in for specific configurations. Rather, the fix is to compile in drivers which implement this properly. This patch enables sysreset and watchdog drivers in SPL and ties them together to implement the same as the do_reset() hack in the board file, except correctly in the DM/DT framework. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Flavio Suligoi <f.suligoi@asem.it> Cc: Harald Seiler <hws@denx.de> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-05-01ARM: imx8m: Fix reset in SPL on NXP iMX8MP EVKMarek Vasut
Board files should not re-implement do_reset() to work around this function not being defined in for specific configurations. Rather, the fix is to compile in drivers which implement this properly. This patch enables sysreset and watchdog drivers in SPL and ties them together to implement the same as the do_reset() hack in the board file, except correctly in the DM/DT framework. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Flavio Suligoi <f.suligoi@asem.it> Cc: Harald Seiler <hws@denx.de> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2020-05-01ARM: imx8m: Fix reset in SPL on NXP iMX8MN EVKMarek Vasut
Board files should not re-implement do_reset() to work around this function not being defined in for specific configurations. Rather, the fix is to compile in drivers which implement this properly. This patch enables sysreset and watchdog drivers in SPL and ties them together to implement the same as the do_reset() hack in the board file, except correctly in the DM/DT framework. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Flavio Suligoi <f.suligoi@asem.it> Cc: Harald Seiler <hws@denx.de> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2020-05-01ARM: imx8m: Fix reset in SPL on NXP iMX8MM EVKMarek Vasut
Board files should not re-implement do_reset() to work around this function not being defined in for specific configurations. Rather, the fix is to compile in drivers which implement this properly. This patch enables sysreset and watchdog drivers in SPL and ties them together to implement the same as the do_reset() hack in the board file, except correctly in the DM/DT framework. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Flavio Suligoi <f.suligoi@asem.it> Cc: Harald Seiler <hws@denx.de> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2020-05-01imx8qxp_mek: Run with caches enabledFabio Estevam
There is no need to run with caches disabled. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-05-01imx8qxp_mek: Remove SPL watchdog optionFabio Estevam
Currently the following watchdog error is seen in SPL: U-Boot SPL 2020.04-00407-g8d5d3bcf3c (Apr 20 2020 - 09:48:09 -0300) Normal Boot WDT: Not found! ... There is no watchdog driver for i.MX8 at the moment, nor code for configuring the watchdog in SPL, so remove the CONFIG_SPL_WATCHDOG_SUPPORT option for now. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-05-01imx8: Run SPL with caches enabledFabio Estevam
It is safe to run SPL with caches enabled on i.MX8, so remove such restriction. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com> Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Acked-by: Anatolij Gustschin <agust@denx.de> Tested-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-05-01rockchip: rk3399: Add Nanopi M4 2GB board supportDeepak Das
commit b2f5da9dd068 ("rockchip: rk3399: Add Nanopi M4 board support") added support for Nanopi M4 board with Dual-Channel 4GB LPDDR3-1866 RAM. This patch adds another variant of NanoPi M4 board with Dual-Channel 2GB DDR3-1866 RAM. Signed-off-by: Deepak Das <deepakdas.linux@gmail.com>
2020-05-01rk3399: Add ROC-RK3399-PC Mezzanine boardSuniel Mahesh
Add Firefly ROC-RK3399-PC Mezzanine board which is an extension board on top of roc-rk3399-pc. Will drop the separate defconfig file, once we support the board detection at runtime. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-01rockchip: rk3328: Add support for ROC-RK3328-CC boardChen-Yu Tsai
The ROC-RK3328-CC from Firefly and Libre Computer Project is a credit card size development board based on the Rockchip RK3328 SoC, with: - 1/2/4 GB DDR4 DRAM - eMMC connector for optional module - micro SD card slot - 1 x USB 3.0 host port - 2 x USB 2.0 host port - 1 x USB 2.0 OTG port - HDMI video output - TRRS connector with audio and composite video output - gigabit Ethernet - consumer IR receiver - debug UART pins The ROC-RK3328-CC has the enable pin of the SD card power switch tied to GPIO_0_D6. This pin also has the function SDMMC0_PWREN, which is muxed by default. SDMMC0_PWREN is an active high signal controlled by the MMC controller, however the switch enable is active low, and pulled low (enabled) by default to make things work on boot. As such, we need to mux away from SDMMC0_PWREN and use GPIO to enable power to the card. The default GPIO state for the pin is pull-down and input, which doesn't require extra configuration when paired with the external pull-down and active low switch. Deal with this by enabling regulator support in SPL, and setting "u-boot,dm-spl" for the regulator and other device nodes needed for muxing the pin. The device tree file is synced from the Linux kernel next-20200324. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-01rockchip: rk3328: Disable generic PHY supportChen-Yu Tsai
The USB PHYs on the RK3328 aren't supported, nor are any other generic PHYs. Because upstream Linux device trees already include the USB PHYs and references in the USB hosts, this would result in various calls to the generic PHY API to fail. Instead, just disable generic PHY support for now. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-30Merge tag 'xilinx-for-v2020.07-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2020.07-rc2 mmc: - Fix dt property handling via generic function clk: - Fix versal watchdog clock setting nand: - Fix zynq nand command comparison xilinx: - Enable ubifs - Sync board_late_init configurations with initrd_high setup - Make custom distro boot more verbose zynq: - Kconfig alignments - Fix nand cse configuration zynqmp: - Fix zcu104 low level qspi configuration - Small DT updates Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-30Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add DM_ETH support for DPAA1, DPAA2 based RDB platforms: ls1046ardb, ls1043ardb, lx2160ardb, ls2088ardb, ls1088ardb. - Add GICv3 support for ls1028a, ls2088a, ls1088a. - Add lpuart support on ls1028aqds. - Few bug fixes and updates on ls2088a, ls1012a, ls1046a, ls1021a based platforms.
2020-04-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- rmobile gen2/gen3 DTS sync and defconfig consolidation
2020-04-29configs: ls2088ardb: Correct DEFAULT_DEVICE_TREE valueKuldeep Singh
LS2088A-RDB has CONFIG_DEFAULT_DEVICE_TREE value correctly set as "fsl-ls2088a-rdb-qspi" for QSPI secure/non-secure boot and TFA non-secure boot mode. Fix the value for TFA secure boot mode. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: enable DM_ETH support for LS1046ARDBMadalin Bucur
Enable DM_ETH on all the defconfigs for the LS1046ARDB board. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: enable DM_ETH support for LS1043ARDBMadalin Bucur
Enable DM_ETH on all the defconfigs for the LS1043ARDB board. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1028aqds: add lpuart configYuantian Tang
Add lpuart config to enable lpuart feature. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>. Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29armv8: ls1028aqds: add lpuart dts supportYuantian Tang
Rename fsl-ls1028a-qds.dts to fsl-ls1028a-qds.dtsi so that it can be used as common device tree for lpuart and duart. Add lpuart device tree and duart device tree respectively for qds which are used with duart and lpuart console. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: lx2160ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LX2160ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls2088ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS2088ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1088ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS1088ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29rockchip: px30: Enable CONFIG_RNG_ROCKCHIPLin Jinhan
CONFIG_RNG_ROCKCHIP/CONFIG_DM_RNG is enabled. Signed-off-by: Lin Jinhan <troy.lin@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-29rockchip: rk3399: Enable CONFIG_RNG_ROCKCHIPLin Jinhan
CONFIG_RNG_ROCKCHIP/CONFIG_DM_RNG is enabled. Signed-off-by: Lin Jinhan <troy.lin@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-28Merge branch 'migrate-various-PHY-options'Tom Rini
- Finish migration of CONFIG_PHYLIB and a number of related symbols to defconfig files.
2020-04-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28Convert CONFIG_PHYLIB et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_BITBANGMII CONFIG_MV88E6352_SWITCH CONFIG_MV88E61XX_SWITCH CONFIG_PHYLIB_10G CONFIG_PHY_AQUANTIA CONFIG_PHY_ATHEROS CONFIG_PHY_BROADCOM CONFIG_PHY_CORTINA CONFIG_PHY_DAVICOM CONFIG_PHY_ET1011C CONFIG_PHY_LXT CONFIG_PHY_MARVELL CONFIG_PHY_MICREL CONFIG_PHY_NATSEMI CONFIG_PHY_REALTEK CONFIG_RTL8211X_PHY_FORCE_MASTER CONFIG_PHY_SMSC CONFIG_PHY_TERANETICS CONFIG_PHY_TI CONFIG_PHY_VITESSE CONFIG_PHY_XILINX Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28sunxi: Fix PHY regression on A20-OLinuXino-Lime2 and A20-Olimex-SOM-EVBTom Rini
When moving the PHYLIB PHY drivers around in Kconfig we did not at the same time perform a careful migration of the related drivers and sub-options. This lead to the case where previously Kconfig-enabled driver choices were now disabled on some platforms. Correct this by enabling both the PHY driver and sub-option on the above referenced platforms. Fixes: af2cbfd6b982 ("drivers: net: Provide Kconfig menu for PHYLIB") Fixes: 8728c97eff5b ("configs: Re-sync") Reported-by: Dario <dario86@tutamail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2Marek Vasut
Synchronize R-Car Gen3 device trees with Linux 5.6.2, commit 9fbe5c87eaa9b72db08425c52c373eb5f6537a0a . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-28ARM: rmobile: Unify Gen3 Salvator-X(S) and ULCB defconfigsMarek Vasut
The r8a779{5,6,65}_salvator-x and r8a779{5,6,65}_ulcb_defconfig were building the same target, except for the default DT. The default DT is however only a detail, as the actual DT to be used to configure U-Boot is detected automatically based on the CPU ID, hence the default DT is not meaningful. Unify each three defconfigs per board to reduce the duplication. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-28Merge tag 'u-boot-amlogic-20200428' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - fix sd-emmc controller A init on G12A/G12B/SM1 SoCs - add GXBB USB PHY driver - enable access to SPI NOR Flash on VIM2 and VIM3/VIM3L boards - fix USB PHYs Power-Up on on VIM3/VIM3L boards
2020-04-28Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2020-04-28configs: ls208xa: Enable GIC_V3_ITS configHou Zhiqiang
Enable GIC_V3_ITS config to initialize the GIC redistributor tables. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit (git 2.34.1) at 2025-01-26 23:40:16 +0000