summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2020-07-29configs: ns3: enable mmc commandsRayagonda Kokatanur
Enable mmc commands for NS3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable BCM IPROC mmc driverRayagonda Kokatanur
Enable BCM IPROC mmc driver ns3. Enable DMA for MMC Host to have better reads and writes. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable pinctrl driverRayagonda Kokatanur
Enable pinctrl driver for ns3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: ns3: define ddr memory layoutRayagonda Kokatanur
Add both DRAM banks memory information and the corresponding MMU page table mappings. Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable GIC_V3 ITSRayagonda Kokatanur
Enables the Generic Interrupt Controller (GIC) V3 Interrupt Translation Service (ITS) Locality-specific Peripheral Interrupts (LPI) configuration table and LPI table. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable clock subsystemRayagonda Kokatanur
Enable clock subsystem for ns3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: ns3: add support for Broadcom Northstar 3Rayagonda Kokatanur
Add support for Broadcom Northstar 3 SoC. NS3 is a octo-core 64-bit ARMv8 Cortex-A72 processors targeting a broad range of networking applications. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: mediatek: Add support for UniElec U7623 boardDavid Woodhouse
This is an MT7623A-based board, very similar to the Banana Pi R2. http://www.unielecinc.com/q/news/cn/p/product/detail.html?qd_guid=OjXwKCaRlN Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-07-29board: mediatek: Use CONFIG_DEFAULT_FDT_FILE for default environmentDavid Woodhouse
Rather than hard-coding it to the Banana Pi R2. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-07-29arm: add (default) config for nanopi2 boardStefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - Configuration changed, mainly several "CONFIG_..." moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig and USB related configs removed because USB is not supported yet. - s5p4418_nanopi2.h: "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable. - pinctrl is supported now, therefore "CONFIG_PINCTRL=y" added to s5p4418_nanopi2_defconfig. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29arm: qemu: disable the EFI workaround for older GRUBArd Biesheuvel
The QEMU/mach-virt targeted port of u-boot currently only runs on QEMU under TCG emulation, which does not model the caches at all, and so no users can exist that are relying on the GRUB hack for EFI boot. We will shortly enable support for running under KVM, but the GRUB hack (which disables all caches without doing cache cleaning by VA during ExitBootServices()) is likely to cause more problems than it solves, given that KVM hosts require correct maintenance if they incorporate non-architected system caches. So let's disable the GRUB hack by default on the QEMU/mach-virt port. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-29arm: qemu: enable LPAE on 32-bitArd Biesheuvel
QEMU's mach-virt machine only supports selecting CPU models that implement the virtualization extensions, and are therefore guaranteed to support LPAE as well. Initially, QEMU would not allow emulating these CPUs running in HYP mode (or EL2, for AArch64), but today, it also contains a complete implementation of the virtualization extensions themselves. This means we could be running U-Boot in HYP mode, in which case the LPAE long descriptor page table format is the only format that is supported. If we are not running in HYP mode, we can use either. So let's enable CONFIG_ARMV7_LPAE for qemu_arm_defconfig so that we get the best support for running with the MMU and caches enabled at any privilege level. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-28sandbox: enable buttonPhilippe Reynes
Enable the support of button (driver and command) on sandbox. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-07-28sandbox64: enable buttonPhilippe Reynes
Enable the support of button (driver and command) on sandbox64. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-07-28x86: chromebook_samus_tpl: Correct the image layoutSimon Glass
At present there is not enough space for U-Boot due to the EFI loader. Correct this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-28x86: chromebook_panther: Correct the image layoutSimon Glass
This board does not have microcode but at present that is not supported by Kconfig nor the binman image layout. Fix both of these. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-28x86: chromebook_link64: Correct the image layoutSimon Glass
At present the image layout is not correct, since it uses the SDRAM address of the 64-bit U-Boot as the ROM address. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-28rockchip: Convert evb-rk3229 over to use binmanSimon Glass
At present this board uses a custom script to produce the .its file. Update it to use binman instead. Binman can create all the images that are needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-28rockchip: Convert evb-rk3288 over to use binmanSimon Glass
At present this board uses a custom script to produce the .its file. Update it to use binman instead. Binman can create all the images that are needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-28Makefile: Allow CONFIG_SPL_FIT_GENERATOR to be emptySimon Glass
At present we use the empty string to indicate that there is no FIT generator, but this doesn't allow an individual board to undefine it. Create a separate bool instead. Update the config of the boards which currently have an empty string. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-28x86: Drop CONFIG_BUILD_ROM and repurpose BUILD_ROMSimon Glass
This Kconfig is not needed anymore since U-Boot will build the ROM if the required binary blobs exist. The BUILD_ROM environment variable used to request that the ROM be built. Now this always happens if the required binary blobs are available. Update it to mean that U-Boot should fail if the ROM cannot be built. This behaviour should be compatible with how it used to work. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-28rockchip: bob: Support SPI-flash bootingSimon Glass
Update the config for chromebook_bob to support booting from SPI flash. The existing SPL size is too small since ATF is needed, so double it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-28rockchip: jerry: Add serial supportSimon Glass
This option allows the serial console to work correctly. Add it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-28sandbox: enable FIT cipher support in defconfigPatrick Oppenlander
Linux distributions generally use the "make defconfig && make tools-all" recipe to generate a uboot-tools (or similar) package. This patch enables FIT cipher support in the default mkimage build. Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
2020-07-28configs: migrate CONFIG_SPL_LOAD_FIT_ADDRESS to defconfigsPeng Fan
Done with: ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS -H Signed-off-by: Peng Fan <peng.fan@nxp.com> [trini: A few more migrations] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28Convert CONFIG_BOOTP_SEND_HOSTNAME to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_BOOTP_SEND_HOSTNAME Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_DRIVER_TI_EMAC_USE_RMII to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_DRIVER_TI_EMAC_USE_RMII Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_SPL_NAND_BASE et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SPL_NAND_BASE CONFIG_SPL_NAND_IDENT Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_SPL_NAND_DRIVERS et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SPL_NAND_DRIVERS CONFIG_SPL_NAND_ECC CONFIG_SPL_NAND_SIMPLE Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_ENV_OVERWRITE to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28configs: stm32mp15: activate CMD_ADTIMGPatrick Delaunay
Activate the support of the command adtimg to handle android images. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-28configs:stm32mp1: activate env config in SPLPatrick Delaunay
Activate env config in SPL with CONFIG_SPL_ENV_SUPPORT and use CONFIG_IS_ENABLED macro to test the activated CONFIG_$(SPL_)ENV_IS_IN_... in env_get_location. Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28stm32mp1: use a specific SD/eMMC partition for U-Boot enviromnentPatrick Delaunay
Save the environment at the end of the U-Boot partition, the GPT partition named "ssbl" in SD card or eMMC and avoid requirements on the "bootfs" file system generated via specific raw tools (like wic and genimage). With the previous configuration of the U-Boot environment saved in ext4 file, U-Boot need to create/modify the file uenv.txt in the ext4 file system; so this EXT4 file system need to be generated without some functionality, like metadata_csum and dir_index, because they are not supported by U-Boot. Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-27Merge tag 'u-boot-amlogic-20200727' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Handle errors in Meson serial driver - Enable HDMI, keyboard and ADC for Odroid-C2
2020-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Bug fixes and updates on ls2088a,ls1028a, ls1046a, ls1043a, ls1012a - lx2-watchdog support - layerscape: pci-endpoint support, spin table relocation fixes and cleanups - fsl-crypto: RNG support and bug fixes
2020-07-27Merge tag 'dm-pull-20jul20-take2a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman support for FIT new UCLASS_SOC patman switch 'test' command minor fdt fixes patman usability improvements
2020-07-27configs: odroid-c2: update for HDMI output, ADC & USB keyboardAnand Moon
Enable options to permit HDMI output on Odroid-C2 GXBB boards. Enable VPU Power Domain. Enable ADC and USB_KERBOARD. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
2020-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- R8A774A1 / Beacon EmbeddedWorks RZG2M Dev Kit support
2020-07-27Merge branch 'net' of https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- Convert dc2114x driver to DM.
2020-07-27colibri-imx7: fix splash logo drawingIgor Opaniuk
1. Configure white on black for video console. 2. Enable printing bmp logo during late board init stage. 3. Use iomux configuration from device tree. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27colibri-imx6ull: fix splash screen logo drawingIgor Opaniuk
Configure white on black for video console. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27verdin-imx8mm: add EEPROM support for carrier boardIgor Opaniuk
Enable these Kconfig symbols: TDX_CFG_BLOCK_EXTRA=y TDX_HAVE_EEPROM_EXTRA=y Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27configs: ls2088a: Restore CONFIG_ENV_ADDR to IFC-NORKuldeep Singh
Restore CONFIG_ENV_ADDR value to fix boot hang with IFC-NOR which is default boot source. Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27configs: lx2160a: Enable Watchdog supportZhao Qiang
Enable support to compile SBSA driver. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27pci: layerscape: Add specific config entry for RC and EP mode driverHou Zhiqiang
Add Root Complex and Endpoint mode specific config entries, such that it's feasible to enable the RC and/or EP mode driver indepently. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27configs:ls1046afrwy: Add tfa secure boot defonfigManish Tomar
Add TFA secure boot defconfig and Enables secure boot related configs in it. Signed-off-by: Manish Tomar <manish.tomar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27configs: lx2160aqds: enable CONFIG_BOARD_EARLY_INIT_RYangbo Lu
Enable CONFIG_BOARD_EARLY_INIT_R for SDHC adapter card identification and configuration. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27config: lx2160/2a: enable dspiZhao Qiang
Enable dspi in lx2160aqds tfa defconfig Enable CONFIG_SPI_FLASH_SST/EON in config file. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-26configs: sandbox: Enable sub command 'env info'Patrick Delaunay
Enable support for sub command 'env info' in sandbox with CONFIG_CMD_NVEDIT_INFO. This is aimed primarily at adding unit test. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-27 01:50:58 +0000