summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2019-07-31configs: am335x_boneblack_vboot_defconfig: Fix regression by enabling BLK ↵Suniel Mahesh
and DM support, disable in SPL This patch adds BLK and DM support for verified boot on TI AM335x chipsets. The following compile warnings are removed: ===================== WARNING ====================== This board does not use CONFIG_DM_MMC. Please update the board to use CONFIG_DM_MMC before the v2019.04 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== ===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== BLK and DM_MMC are enabled by default in SPL as well, which is making the build to break with an overflow(spl image doesn't fit into SRAM because of size constraints). LD spl/drivers/built-in.o LD spl/u-boot-spl arm-linux-ld.bfd: u-boot-spl section .u_boot_list will not fit in region .sram arm-linux-ld.bfd: region .sram overflowed by 116 bytes make[1]: *** [spl/u-boot-spl] Error 1 make: *** [spl/u-boot-spl] Error 2 For the above reason BLK and DM_MMC is disabled in SPL. Built and tested on AM335x device (BeagleboneBlack). Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-07-31configs: j721e_evm_a72: Disable K3_SYSTEM_CONTROLLERSuman Anna
The K3 System Controller driver is used for loading and starting the System Firmware, and is used only on R5 SPL. It need not be enabled and built for the A72 U-Boot and SPL, so disable it from the j721e_evm_a72 defconfig. While at this, also remove the unneeded CONFIG_SPL_REMOTEPROC and CONFIG_CMD_REMOTEPROC as no remoteprocs are now loaded from A72 SPL. Signed-off-by: Suman Anna <s-anna@ti.com>
2019-07-31configs: am65x_evm_a53: Disable K3_SYSTEM_CONTROLLERSuman Anna
The K3 System Controller driver is used for loading and starting the System Firmware, and is used only on R5 SPL. It need not be enabled and built for the A53 U-Boot and SPL, so disable it from both the GP and HS AM65x A53 defconfigs. While at this, also remove the unneeded CONFIG_SPL_REMOTEPROC and CONFIG_CMD_REMOTEPROC as no remoteprocs are now loaded from A53 SPL. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-31ARM: da850-evm: Replace CMD_SF with CMD_MTDAdam Ford
This patch enables MTD and CMD_MTD and it works with SPI NOR, so the older CMD_SF can be removed. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-31ARM: da850evm: Split MTDPARTS into SPL and u-bootAdam Ford
The MTDPARTS currently lists just u-boot.ais as 512k in size. This works when loading the ais file via serial port, but if one wanted to update just the u-boot portion, it's not really possible. This patch splits the MTDPARTS into a 32k SPL partiion and a 480k u-boot partition which allows u-boot.img to be burned to the u-boot partition. The remaining partitions are left with the same sizes and offsets to not break backwards compatibility. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-31configs: am57xx_evm_defconfig: Enable 'dtimg' commandSam Protsenko
We are going to implement DTBO partition for BeagleBoard X15 further. To support this, 'dtimg' command must be enabled. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-07-31configs: am57xx_evm_defconfig: Enable 'bcb' commandSam Protsenko
It is essential to have an access to BCB area of 'misc' partition on Android devices [1]. For BeagleBoard X15 the 'bcb' command will be further used for reboot reason implementation and booting to recovery. It can be also used for debugging reasons, like checking RescueParty messages in BCB area. [1] doc/android/bcb.txt Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-07-31board: amlogic: add support for Odroid-N2Neil Armstrong
ODROID-N2 is a single board computer manufactured by Hardkernel Co. Ltd with the following specifications: - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC - 4GB DDR4 SDRAM - Gigabit Ethernet - HDMI 2.1 4K/60Hz display - 40-pin GPIO header - 4 x USB 3.0 Host, 1 x USB OTG - eMMC, microSD - Infrared receiver The board directory is W400, the name of the Amlogic Reference Design of Amlogic G12B with Gigabit boards, which will be used for similar boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-31configs: sandbox: Enable composite clkPeng Fan
Enable composite clk for sandbox test Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-30arm64: zynqmp: add support for Avnet UltraZed-EV Starter KitLuca Ceresoli
Avnet UltraZed-EV Starter Kit is composed by the UltraZed-EV SoM and the only publicly-available compatible carrier card. The SoM is based on the EV version of the Xilinx ZynqMP SoC+FPGA. The psu_init_gpl.c file has been generated from the board definition files at [0] using Vivado 2018.3 and then minimized by tools/zynqmp_psu_init_minimize.sh. Manually removed serdes init code since it is not mentioned in device tree and fixed a checkpatch error. [0] https://github.com/Avnet/bdf/tree/3686c9ff7d2f0467fb4fcf39f861b8d6ff183b12/ultrazed_7ev_cc/1.1 Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30arm64: zynqmp: Rename zc1275 to zcu1275Michal Simek
Name of this platform has changed and released to customers that's why name has also changed. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Series-to: uboot
2019-07-29Merge branch '2019-07-29-ti-imports'Tom Rini
- More DaVinci DM migration, drop am18xx EVM platform - Keystone bug fix
2019-07-29davinci: omapl138-lcdk: enable driver-model in SPLBartosz Golaszewski
Enable CONFIG_SPL_DM and enable the driver model for serial by defining an appropriate device in the board file for da850-lcdk. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTFBartosz Golaszewski
We're working towards enabling the driver-model in SPL for da850-lcdk. Enable CONFIG_USE_TINY_PRINTF in defconfig to reduce SPL size. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLEBartosz Golaszewski
We're working towards enabling the driver model in SPL for da850-lcdk. Enable SPL_SYS_MALLOC_SIMPLE in defconfig to reduce SPL size. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29davinci: da850-evm: enable driver model for NANDBartosz Golaszewski
Enable the driver-model on da850-evm. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device. On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2019-07-29davinci: omapl138-lcdk: enable driver model for NANDBartosz Golaszewski
Enable the driver-model on da850-lcdk. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device. On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29omapl138_lcdk_defconfig: don't build support for SPIBartosz Golaszewski
The following warning is emited when building u-boot for da850-lcdk: ===================== WARNING ====================== This board does not use CONFIG_DM_SPI. Please update the board before v2019.04 for no dm conversion and v2019.07 for partially dm converted drivers. Failure to update can lead to driver/board removal See doc/driver-model/MIGRATION.txt for more info. ==================================================== ===================== WARNING ====================== This board does not use CONFIG_DM_SPI_FLASH. Please update the board to use CONFIG_SPI_FLASH before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== While we could fix it by selecting CONFIG_DM_SPI, there's no need to build it at all as SPI is disabled on da850-lcdk. Remove all unneeded options from the defconfig. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigsBartosz Golaszewski
There are no more "real" users of CONFIG_DM_I2C_COMPAT and we'll soon remove it altogether. Stop building it in sandbox mode. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29davinci: remove CONFIG_DM_I2C_COMPAT from defconfigsBartosz Golaszewski
This option is no longer used on any davinci board but still selected in defconfigs which causes the following warning: ===================== WARNING ====================== This board uses CONFIG_DM_I2C_COMPAT. Please remove (possibly in a subsequent patch in your series) before sending patches to the mailing list. ==================================================== Remove all references to CONFIG_DM_I2C_COMPAT from davinci. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29ARM: da850_am18xxevm: Remove config and referencesAdam Ford
This board has been abandonded for a while. I do not have this hardware and nobody has appeared to notice and/or care that it's orphaned. Since much of this code is inserted into the da850evm code base, removing it from support will make da850evm support easier going forward. This patch removes the da850_am18xxevm_defconfig, README references to this board and the reference to this board from the MAINTAINERS list. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-29Merge branch '2019-07-29-master-imports'Tom Rini
- Assorted bug fixes
2019-07-29rtc: move RTC_RX8025 to KconfigHeiko Schocher
move RTC_RX8025 to Kconfig and fixup board configs. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29board: mediatek: Add pumpkin board supportFabien Parent
The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version: MT8516 SoC and MT8167 SoC. The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header. Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board. The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392. The eMMC and NAND are sharing pins and cannot be used together. This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-socfpgaTom Rini
- Various gen5 fixes
2019-07-29configs: colibri-imx6ull: switch to DM_VIDEOIgor Opaniuk
Use CONFIG_DM_VIDEO=y by default for Colibri iMX6ULL. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29configs: colibri_imx7: enable DM_VIDEOIgor Opaniuk
Enable DM_VIDEO support for Colibri iMX7 NAND version. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29colibri_vf: enable DM_VIDEOIgor Opaniuk
Enable DM_VIDEO for Colibri VF. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-27Merge branch '2019-07-26-ti-imports'Tom Rini
- Bring in the rest of the J271E platform - Various OMAP3/AM3517, DA850 fixes
2019-07-27ARM: omap3/omap35_logic: Fix broken Logic PD Torpedo bootingAdam Ford
The SOM-LV and Torpedo boards are very similar, but something happened growing SPL enough to break the Torpedo. The SOM-LV board were not doing alias sequencing during SPL and they continue to work while something broke the Torpedo. This patch disables SPL_DM_SEQ_ALIAS allowing it to boot again. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-27ARM: da850evm: Remove legacy OHCI referencs and unify platformAdam Ford
OHCI was added with DM_USB support, so there are a few unneeded items in the header file that can be removed. This also unifies da850evm with NOR and NAND booting options so all have OHCI support. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate da850_am18xxevm] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-27ARM: omap3_logic & omap35_logic: Disable OMAP EHCI for TorpedoAdam Ford
The OMAP35 and AM/DM37 Torpedo boards do not have a USB tranceiver connected to the USB host port, so this patch removes it from the defconfig files. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-27Merge tag 'u-boot-imx-20190719' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20190719 - CCF for i.MX6 - nandbcb command to write SPL into NAND - Switch to DM (i.MX28) - Boards: Toradex, engicam, DH - Fixes for i.MX8 - Fixes for i.MX7ULP Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
2019-07-27Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini
- fix for fsl_qspi read timeout (Thomas) - spi-mem read data size fix (Ye Li) - SiFive SPI driver, mmc_spi flags (Bhargav, Anup) - Micron spi-nor parts (Ashish) - MT7629 spi-mem driver(Weijie)
2019-07-26ARM: am3517-evm: Migrate to SPL_OF_CONTROLAdam Ford
Like the other Logic PD OMAP35/DM37 boards, this board has device tree enabled for U-Boot. This patch converts the board to enable SPL_OF_CONTROL and further shrinks the device tree in SPL to limit it to UART3 (console), MMC1, i2c1, and GPIO4 (for mmc1 CD and WP). There appears to be a bug in minicom so users may need to switch the minicom terminal emulation to ANSI from VT102 due to the junk that gets pushed out of the UART on startup. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-26ARM: am3517-evm: Enable DM_PMIC and DM_REGULATOR functionsAdam Ford
The PBIAS regulator is available on OMAP3's, and it's shared on the AM35, so this patch enables that in U-Boot along with GPIO based regulators. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-26configs: j721e_evm_a72: Add initial supportLokesh Vutla
Add initial defconfig support for J721e that runs on A72. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Add MAINTAINERS entry] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-26configs: j721e_evm_r5: Add initial supportLokesh Vutla
Add initial defconfig support for J721e that runs on R5. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Add MAINTAINERS file] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-26remoteproc: k3_rproc: Rename to ti_k3_arm64_rprocLokesh Vutla
k3_rproc driver is specifically meant for controlling an arm64 core using TISCI protocol. So rename the driver, Kconfig symbol, compatible and functions accordingly. While at it drop this remoteproc selection for a53 defconfig. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-25net: davinci_emac: convert to using the driver modelBartosz Golaszewski
Now that we removed all legacy boards selecting TI_EMAC we can completely convert the driver code to using the driver model. This patch also updates all remaining users of davinci_emac. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Tested-by: Adam Ford <aford173@gmail.com> #am3517-evm & da850-evm Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2019-07-25Add support for the NXP LS1021A-TSN boardJianchao Wang
The LS1021A-TSN is a development board built by VVDN/Argonboards in partnership with NXP. It features the LS1021A SoC and the first-generation SJA1105T Ethernet switch for prototyping implementations of a subset of IEEE 802.1 TSN standards. Supported boot media: microSD card (via SPL), QSPI flash. Rev. A of the board uses a Spansion S25FL512S_256K serial flash, which is 64 MB in size and has an erase sector size of 256KB (therefore, flashing the RCW would erase part of U-Boot). Rev. B and C of the board use a Spansion S25FL256S1 serial flash, which is only 32 MB in size but has an erase sector size of 64KB (therefore the RCW image can be flashed without erasing U-Boot). To avoid the problems above, the U-Boot base address has been selected at 0x100000 (the start of the 5th 256KB erase sector), which works for all board revisions. Actually 0x40000 would have been enough, but 0x100000 is common for all Layerscape devices. eTSEC3 is connecting directly to SJA1105 via an RGMII fixed-link, but SJA1105 is currently not supported by uboot. Therefore, eTSEC3 is disabled. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Jianchao Wang <jianchao.wang@nxp.com> Signed-off-by: Changming Huang <jerry.huang@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> [Vladimir] Code taken from https://github.com/openil/u-boot (which itself is mostly copied from ls1021a-iot) and adapted with the following changes: - Add a008850 errata workaround - Converted eTSEC, MMC to DM to avoid all build warnings - Plugged in distro boot feature, including support for extlinux.conf - Added defconfig for QSPI boot - Added the board/freescale/ls1021atsn/README.rst for initial setup - Increased CONFIG_SYS_MONITOR_LEN so that the SPL malloc pool does not get overwritten during copying of the u-boot.bin payload from MMC to DDR. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-25arm: ls1021atwr: Convert to use driver model TSEC driverBin Meng
Now that we have added driver model support to the TSEC driver, convert ls1021atwr board to use it. This depends on previous DM series for ls1021atwr: http://patchwork.ozlabs.org/patch/561855/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> [Vladimir] Made the following changes: - Added 'status = "disabled";' for all Ethernet ports in ls1021a.dtsi - Fixed the confusion between the SGMII/TBI PCS for enet0 and enet1 - a mistake ported over from Linux. Each SGMII PCS lies on the private MDIO bus of the interface (and the RGMII enet2 has no SGMII PCS). - Added CONFIG_DM_ETH to all ls1021atwr_* defconfigs - Completely removed non-DM_ETH support from ls1021atwr - Changed "compatible" string from "fsl,tsec-mdio" to "fsl,etsec2-mdio" and from "fsl,tsec" to "fsl,etsec2" to match Linux
2019-07-25configs: ls1028a: enable networking options in rdb, qds defconfigAlex Marginean
Enables ethernet, MDIO, PHY drivers for LS1028A RDB and QDS. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25spi: Drop obsolete mtk_qspi driver referencesWeijie Gao
Since u-boot has added the spi-mem framework and replaced the spi-nor framework, the mtk_qspi is no longer compatible with the new spi-nor driver. Remove this driver along with replacing config item with new mtk spi-nor driver. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> [jagan: squash related changes and update commit message] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-24test/py: Add base test case for A/B updatesRuslan Trofymenko
Add sandbox test for 'ab_select' command. Test: ./test/py/test.py --bd sandbox --build -k test_ab Signed-off-by: Ruslan Trofymenko <ruslan.trofymenko@linaro.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Alistair Strachan <astrachan@google.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-23Merge tag 'u-boot-stm32-20190723' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - add rtc driver for stm32mp1 - add remoteproc driver for stm32mp1 - use kernel qspi compatible string for stm32
2019-07-22rtc: Add rtc driver for stm32mp1Patrick Delaunay
Add support of STM32MP1 rtc driver. Enable it for basic and trusted configurations. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
2019-07-22configs: stm32mp15: enable stm32 remoteprocPatrick Delaunay
Activate the remote processor support for stm32mp15 configs. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-07-21Merge tag 'rockchip-for-v2019.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - rk3399 lpddr4 support - rk3399-rock960 board support improvement - Eliminate pyelftools dependency by make_fit_atf.py - clean up rockchip dts to use -u-boot.dtsi - use ARM arch/generic timer instead of rk_timer - clean up Kconfig options for board support
2019-07-21spl: kconfig: separate sysreset and firmware drivers from miscSimon Goldschmidt
This adds separate kconfig options for drivers/sysreset and drivers/firmware. Up to now, CONFIG_SPL_DRIVERS_MISC_SUPPORT added drivers/misc to SPL build but also added drivers/firmware and drivers/sysreset at the same time. Since that is confusing, this patch uses CONFIG_SPL_SYSRESET for drivers/sysreset and adds CONFIG_SPL_FIRMWARE for drivers/firmware (and accordingly for the TPL options). CONFIG_SPL_DRIVERS_MISC_SUPPORT stays for including drivers/misc into the SPL build (and accordingly for TPL) since there are boards using non-DM (non UCLASS_MISC) files from drivers/misc. Such boards don't have CONFIG_SPL_MISC enabled, so cannot use this to include drivers/misc into the SPL build. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>