summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2020-01-17board: stm32mp1: move CONFIG_ENV_XXX in defconfigPatrick Delaunay
Move CONFIG_ENV_SECT_SIZE and CONFIG_ENV_OFFSET in stm32mp15_*_defconfig for ST board with NOR support (STM32MP15xx-EV1 boards) - CONFIG_SECT_SIZE values = the max supported NOR erase size (256KB) - CONFIG_ENV_OFFSET = offset for NOR (ENV_IS_IN_SPI_FLASH) This Patch prepares the U-Boot support of boards with STM32MP15x SOC not provided by STMicroelectronics. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-01-16mx7ulp_evk: Disable CONFIG_NETFabio Estevam
Currently the following build warning is seen: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. =================================================== Since the mx7ulp-evk board does not have networking support, explicitly disable networking. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-01-16Merge tag 'mmc-1-16-2020' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- Cleanup of fsl_esdhc driver together with arch/defconfig change - Add quirk for APP_CMD retry
2020-01-16Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Clearfog: Fix SD booting (Baruch) - Misc updates to MMC handling in SPL to support booting from main data partition (vs hardware boot partition) on MVEBU (Baruch)
2020-01-16Merge tag 'xilinx-for-v2020.04' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.04 ARM64: - Add INIT_SPL_RELATIVE dependency SPL: - FIT image fix - Enable customization of bl2_plat_get_bl31_params() Pytest: - Add test for octal/hex conversions Microblaze: - Fix manual relocation for one SPI instance Nand: - Convert zynq/zynqmp drivers to DM Xilinx: - Enable boot script location via Kconfig - Support OF_SEPARATE in board FDT selection - Remove low level uart setup it is done later by code - Add support for DEVICE_TREE variable passing for SPL Zynq: - Enable jtag boot mode via distro boot - Removing unused baseaddresses from hardware.h - DT fixups ZynqMP: - Fix emmc boot sequence - Simplify spl logic around bss and board_init_r() - Support psu_post_config_data() calling - Tune mini-nand DTS - Fix psu wiring for a2197 boards - Add runtime MMC device boot order filling in spl - Clear ATF handoff handling with custom bl2_plat_get_bl31_params() - Add support u-boot.its generation - Use single image configuration for all platforms - Enable PANIC_HANG via Kconfig - DT fixups - Firmware fixes - Add support for zcu208 and zcu1285 Versal: - Fix emmc boot sequence - Enable board_late_init() by default
2020-01-16configs: mediatek: fix mt7623n bpir2 defconfigSam Shih
This patch add CONFIG_TARGET_MT7623 into mt7623n_bpir2_defconfig to fix the mt7623 compile error after building others mediatek target platform Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16Add support for MT7622 reference boardSam Shih
This adds a general board file based on MT7622 SoCs from MediaTek. This commit is adding the basic boot support for the MT7622 rfb. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-01-16ARM: MediaTek: add basic support for MT8512 boardsmingming lee
This adds a general board file based on MT8512 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8512 eMMC board. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16arm: mvebu: clearfog: set uboot image SD card offsetBaruch Siach
Armada 38x ROM skips the first SD card offset when loading SPL. This affects the location of the main U-Boot image. SPL MMC code now supports U-Boot image offset based on run-time detection of the boot partition. Use this feature to make the same generated image support both SD card and eMMC boot partition. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-16configs: clearfog: enable SPL_DM_GPIO to fix boot from SDBaruch Siach
SPL needs DM GPIO to read the SD card-detect signal. This complements the fix in commit 70bae02f71d4 ("arm: mvebu: clearfog: fix boot from SD card"). Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-16configs: ls1028a: use default SDHC clock divider valueYangbo Lu
The SDHC clock divider value for LS1028A should be default 2, not 1. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-15Kconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMAVignesh Raghavendra
Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA. This allows to use macros such as CONFIG_IS_ENABLED() that allow conditional compilation of code for SPL and U-Boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-14imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVKGiulio Benetti
This commit adds board support for i.MXRT1050-EVK from NXP. This board is an evaluation kit provided by NXP for i.MXRT105x processor family. More information about this board can be found here: https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK The initial supported/tested devices include: - Debug serial - SD Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14pico-imx7d: Convert to DM_ETHJoris Offouga
Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-01-14pico-imx7d: Disable USB_ETHER support for bl33 defconfigJoris Offouga
For DM_ETH support , it's require to disable this config. When this config is enable, This generate a error with spl in linker script Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-01-14imx8qxp_mek: Select CONFIG_NET_RANDOM_ETHADDRFabio Estevam
Some i.MX8QXP MEK boards do not have MAC address stored and hang during eth driver probe: Error: ethernet@5b040000 address not set. (Board hangs) To fix this problem select CONFIG_NET_RANDOM_ETHADDR so that a valid MAC address can be used in such case. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-01-14imx: add imx8x based deneb boardAnatolij Gustschin
Add support for Capricorn Deneb SoM variant. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14imx: add imx8x capricorn giedi boardAnatolij Gustschin
Add support for i.MX8X based Capricorn Giedi SoM. Supported interfaces: GPIO, ENET, eMMC, I2C, UART. Console output: U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) Trying to boot from MMC1 Load image from MMC/SD 0x3e400 U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07 CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C Model: Siemens Giedi Board: Capricorn Boot: MMC0 DRAM: 1022 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial@5a080000 Out: serial@5a080000 Err: serial@5a080000 Net: eth1: ethernet@5b050000 [PRIME] Autobooting in 1 seconds, press "<Esc><Esc>" to stop Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14arm64: versal: Enable board_late_init callingMichal Simek
Qemu v4.2.0 maps bootmode registers to address space which was the reason why board_late_init() was disabled and accesses were failing. With new Qemu board_late_init() can be called without any issue. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14arm64: zynqmp: Add support for zcu1285 revA boardMichal Simek
zcu1285 is the same as zcu1275 but it is using Avnet FMC http://www.ultrazed.org/product/network-fmc-module Unfortunately not everything is connected now that's why this is only describing system which Xilinx is using. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14arm64: zynqmp: Add support for zcu208Michal Simek
The board is very similar to zcu216 with zu49dr device. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14arm64: zynqmp: Move PANIC to KconfigMichal Simek
Convert another option Kconfig. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14arm64: zynqmp: Use zynqmp_virt platformMichal Simek
Decrease amount of the similar defconfigs and use generic one instead. The change was declared by commit 4b37c13dc353 ("arm64: zynqmp: Introduce virtual defconfig") and this patch removes configs for the most of the boards. Utra96/zcu100/zcu102/zcu102 and ZynqMP based System controllers *a2197*. have been also boot tested to make sure that funcionality remains the same. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platformMichal Simek
These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready. export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14arm64: zynqmp: Add board_boot_order for MMC boot extensionMichal Simek
In past SPL_ZYNQMP_TWO_SDHCI symbol was introduced to handle boards with two sdhci controllers. The problem was that U-Boot is registering controllers based on aliases in DT but bootmode targets specific controller ID. That's why on boards with one "second" sdhci controller bootmode was pointing to second controller(MMC2) but alias was setup to mmc0 (the first controller). And SPL requires to point to mmc0 in this case. Long time ago commit f101e4bd3703 ("spl: add support for alternative boot device") added support for handling multiple bootmodes in SPL. Use this functionality and setup second sdhci controller as backup boot device. Below is table with behavior: HW/bootmode bootorder sd0/sd0 mmc0/mmc1 (mmc1 never called) sd1/sd1 mmc1/mmc0 (mmc0 fails and mmc1 is called) sd0+sd1/sd0 mmc0/mmc1 (mmc1 never called) sd0+sd1/sd1 mmc1/mmc0 (mmc0 never called) All other bootmodes are not affected but order can be extended to cover advance boot flows. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14arm64: zynqmp: Enable bind/unbind commands for all boardsMichal Simek
These commands are useful in connection to usb and other devices that's why enable it by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-10dtimg/am57xx_evm_defconfig: Rename dtimg to adtimgEugeniu Rosca
Rename the existing 'dtimg' command to 'adtimg', in order to: - Suggest the Android origins and scope - Be consistent with the upcoming 'abootimg' command (naming suggested by Simon [*]) The change in _not_ backward compatible, but its benefits outweigh its downsides, given that we don't expect active users of 'dtimg' today. Perform the rename in several steps: 1. Rename *.c file and Kconfig symbol. This should allow 'git log --follow' to properly track the history of 'adtimg.c' 2. 's/dtimg/adtimg/g' in the internal namespace of 'adtimg.c' ELF comparison [**] before and after shows no functional change. [*] https://patchwork.ozlabs.org/patch/1182212/#2291600 [**] diff -u <(objdump -d cmd/dtimg.o) <(objdump -d cmd/adtimg.o) Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Simon Glass<sjg@chromium.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2020-01-10boards/km_arm: enable support for Macronix SPI NOR flashHolger Brunck
The M25P80 and M25P32 SPI flashes from Numonix/Micron will be replaced by Marconix MX25L80 and MX25L32 flashes. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> CC: Stefan Roese <sr@denx.de> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-10arm/km: remove board KMCOGE3UNHolger Brunck
This target is out of maintenance and can be removed. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> CC: Stefan Roese <sr@denx.de> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-10km/boards: fix typo for MAC address offset config optionHolger Brunck
This patch only fixes a typo. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> CC: Stefan Roese <sr@denx.de> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-10configs: add eth dm support for all ColdFire boardsAngelo Durgehello
Add dm eth config options for all involved ColdFire-based boards. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-09Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DFU updates
2020-01-08Merge tag 'efi-2020-04-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc1 This pull request provides: * support for FIT images for UEFI binaries * drivers for hardware random number generators * an implementation of the EFI_RNG_PROTOCOL * a sub-command for efidebug to display configuration tables
2020-01-08Merge tag 'uniphier-v2020.04' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier UniPhier SoC updates for v2020.04 - add pinmux nodes for I2C ch5, ch6 - enable SPI driver and command
2020-01-08Merge tag 'u-boot-imx-20200108' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------------------------------------------- Add i.MX8MP SoC and EVK board Update README for i.MX8MN EVK and fix mmc env Add pca9450 driver -------------------------------------------------------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
2020-01-08Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2020-01-08Merge tag 'u-boot-amlogic-20200108' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Khadas VIM3L based on Amlogic S905D3 support - Various fixups for amlogic boards - Unnecessary header includes drop into video/meson
2020-01-09uniphier_{v7, v8}_defconfig: enable SPI driver and sspi commandMasahiro Yamada
Compile drivers/spi/uniphier_spi.c and cmd/spi.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-08imx: imx8mn: enable CONFIG_CMD_ERASEENVPeng Fan
enable CONFIG_CMD_ERASEENV to make it easy to erase env. Use savedefconfig to generate new defconfig. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: add i.MX8MP EVK boardPeng Fan
Add basic i.MX8MP EVK board support U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) power_pca9450b_init DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Failed to find clock node. Check device tree WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) CPU: Freescale i.MX8MP rev1.0 at 1000 MHz Reset cause: POR Model: NXP i.MX8MPlus EVK board DRAM: 6 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 u-boot=> mmc list FSL_SDHC: 1 (SD) FSL_SDHC: 2 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-07configs: sandbox: Enable random number generator(rng) deviceSughosh Ganu
Enable support for random number generator on sandbox configs. This is aimed primarily at adding unit test support for rng uclass. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07configs: stm32mp15: Enable random number generator(rng) deviceSughosh Ganu
Enable support for the rng device on the stm32mp15 configs. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-07configs: qemu: enable FIT images on qemu_arm(64)_defconfigHeinrich Schuchardt
For testing UEFI FIT images we need FIT image support on QEMU. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07boards: amlogic: add Khadas VIM3L supportChristian Hewitt
Khadas VIM3L uses the same board layout as VIM3, but with an S905D3 chip instead of A311D. Board config is derived from khadas-vim3_defconfig and sei610_defconfig. README is based on README.khadas-vim3; the difference is that VIM3L uses FIP files from the g12a folder in vendor sources not the g12b folder. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: added vim3l readme into w400 MAINTAINERS]
2020-01-07Merge tag 'u-boot-imx-20200107' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx New for 2020.04 --------------- - New boards Embedded Artists COM board Xea Board - Switch to DM: Aristainetos boards Toradex colibri (DM_ETH) iCubox GE bx50v3 mx7dsabre (DM_ETH) cx9020 - New features: Bootaux with elf files Default SYS_THUMB_BUILD for i.MX6/7 - Fixes: DHCOM i.MX6 PDK Engicam i.MX8M tools (imx8m_image) Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/633679664
2020-01-07Merge tag 'u-boot-atmel-2020.04-a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel features for 2020.04 cycle This feature set is a patch series from Tudor Ambarus which includes parsing of the spi flash SFDP parser for SST flashes, and using those tables to retrieve unique saved per device MAC address. This is then used as base mac address on the SAMA5D2 Wireless SOM EK board.
2020-01-07arm: socfpga: agilex: Enable Agilex SoC buildLey Foon Tan
Add build support for Agilex SoC. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07x86: edison: Enable DFU timeoutAndy Shevchenko
The stock U-Boot on Intel Edison has timeout parameter for DFU command. Enable it here to be compatible with the original U-Boot configuration. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-07imx8mm_evk: Adjust the environment for booting a mainline kernelFabio Estevam
Adjust the environment for booting a mainline kernel by default. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-01-07colibri_imx7: migrate to DM_ETHIgor Opaniuk
Migrate to DM_ETH and remove hardcoded pinmux configuration. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
generated by cgit (git 2.34.1) at 2024-12-27 02:37:11 +0000