summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2020-05-01imx8qxp_mek: Run with caches enabledFabio Estevam
There is no need to run with caches disabled. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-05-01imx8qxp_mek: Remove SPL watchdog optionFabio Estevam
Currently the following watchdog error is seen in SPL: U-Boot SPL 2020.04-00407-g8d5d3bcf3c (Apr 20 2020 - 09:48:09 -0300) Normal Boot WDT: Not found! ... There is no watchdog driver for i.MX8 at the moment, nor code for configuring the watchdog in SPL, so remove the CONFIG_SPL_WATCHDOG_SUPPORT option for now. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-05-01imx8: Run SPL with caches enabledFabio Estevam
It is safe to run SPL with caches enabled on i.MX8, so remove such restriction. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com> Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Acked-by: Anatolij Gustschin <agust@denx.de> Tested-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-05-01rockchip: rk3399: Add Nanopi M4 2GB board supportDeepak Das
commit b2f5da9dd068 ("rockchip: rk3399: Add Nanopi M4 board support") added support for Nanopi M4 board with Dual-Channel 4GB LPDDR3-1866 RAM. This patch adds another variant of NanoPi M4 board with Dual-Channel 2GB DDR3-1866 RAM. Signed-off-by: Deepak Das <deepakdas.linux@gmail.com>
2020-05-01rk3399: Add ROC-RK3399-PC Mezzanine boardSuniel Mahesh
Add Firefly ROC-RK3399-PC Mezzanine board which is an extension board on top of roc-rk3399-pc. Will drop the separate defconfig file, once we support the board detection at runtime. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-01rockchip: rk3328: Add support for ROC-RK3328-CC boardChen-Yu Tsai
The ROC-RK3328-CC from Firefly and Libre Computer Project is a credit card size development board based on the Rockchip RK3328 SoC, with: - 1/2/4 GB DDR4 DRAM - eMMC connector for optional module - micro SD card slot - 1 x USB 3.0 host port - 2 x USB 2.0 host port - 1 x USB 2.0 OTG port - HDMI video output - TRRS connector with audio and composite video output - gigabit Ethernet - consumer IR receiver - debug UART pins The ROC-RK3328-CC has the enable pin of the SD card power switch tied to GPIO_0_D6. This pin also has the function SDMMC0_PWREN, which is muxed by default. SDMMC0_PWREN is an active high signal controlled by the MMC controller, however the switch enable is active low, and pulled low (enabled) by default to make things work on boot. As such, we need to mux away from SDMMC0_PWREN and use GPIO to enable power to the card. The default GPIO state for the pin is pull-down and input, which doesn't require extra configuration when paired with the external pull-down and active low switch. Deal with this by enabling regulator support in SPL, and setting "u-boot,dm-spl" for the regulator and other device nodes needed for muxing the pin. The device tree file is synced from the Linux kernel next-20200324. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-01rockchip: rk3328: Disable generic PHY supportChen-Yu Tsai
The USB PHYs on the RK3328 aren't supported, nor are any other generic PHYs. Because upstream Linux device trees already include the USB PHYs and references in the USB hosts, this would result in various calls to the generic PHY API to fail. Instead, just disable generic PHY support for now. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-30Merge tag 'xilinx-for-v2020.07-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2020.07-rc2 mmc: - Fix dt property handling via generic function clk: - Fix versal watchdog clock setting nand: - Fix zynq nand command comparison xilinx: - Enable ubifs - Sync board_late_init configurations with initrd_high setup - Make custom distro boot more verbose zynq: - Kconfig alignments - Fix nand cse configuration zynqmp: - Fix zcu104 low level qspi configuration - Small DT updates Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-30Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add DM_ETH support for DPAA1, DPAA2 based RDB platforms: ls1046ardb, ls1043ardb, lx2160ardb, ls2088ardb, ls1088ardb. - Add GICv3 support for ls1028a, ls2088a, ls1088a. - Add lpuart support on ls1028aqds. - Few bug fixes and updates on ls2088a, ls1012a, ls1046a, ls1021a based platforms.
2020-04-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- rmobile gen2/gen3 DTS sync and defconfig consolidation
2020-04-29configs: ls2088ardb: Correct DEFAULT_DEVICE_TREE valueKuldeep Singh
LS2088A-RDB has CONFIG_DEFAULT_DEVICE_TREE value correctly set as "fsl-ls2088a-rdb-qspi" for QSPI secure/non-secure boot and TFA non-secure boot mode. Fix the value for TFA secure boot mode. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: enable DM_ETH support for LS1046ARDBMadalin Bucur
Enable DM_ETH on all the defconfigs for the LS1046ARDB board. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: enable DM_ETH support for LS1043ARDBMadalin Bucur
Enable DM_ETH on all the defconfigs for the LS1043ARDB board. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1028aqds: add lpuart configYuantian Tang
Add lpuart config to enable lpuart feature. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>. Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29armv8: ls1028aqds: add lpuart dts supportYuantian Tang
Rename fsl-ls1028a-qds.dts to fsl-ls1028a-qds.dtsi so that it can be used as common device tree for lpuart and duart. Add lpuart device tree and duart device tree respectively for qds which are used with duart and lpuart console. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: lx2160ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LX2160ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls2088ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS2088ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1088ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS1088ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29rockchip: px30: Enable CONFIG_RNG_ROCKCHIPLin Jinhan
CONFIG_RNG_ROCKCHIP/CONFIG_DM_RNG is enabled. Signed-off-by: Lin Jinhan <troy.lin@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-29rockchip: rk3399: Enable CONFIG_RNG_ROCKCHIPLin Jinhan
CONFIG_RNG_ROCKCHIP/CONFIG_DM_RNG is enabled. Signed-off-by: Lin Jinhan <troy.lin@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-28Merge branch 'migrate-various-PHY-options'Tom Rini
- Finish migration of CONFIG_PHYLIB and a number of related symbols to defconfig files.
2020-04-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28Convert CONFIG_PHYLIB et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_BITBANGMII CONFIG_MV88E6352_SWITCH CONFIG_MV88E61XX_SWITCH CONFIG_PHYLIB_10G CONFIG_PHY_AQUANTIA CONFIG_PHY_ATHEROS CONFIG_PHY_BROADCOM CONFIG_PHY_CORTINA CONFIG_PHY_DAVICOM CONFIG_PHY_ET1011C CONFIG_PHY_LXT CONFIG_PHY_MARVELL CONFIG_PHY_MICREL CONFIG_PHY_NATSEMI CONFIG_PHY_REALTEK CONFIG_RTL8211X_PHY_FORCE_MASTER CONFIG_PHY_SMSC CONFIG_PHY_TERANETICS CONFIG_PHY_TI CONFIG_PHY_VITESSE CONFIG_PHY_XILINX Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28sunxi: Fix PHY regression on A20-OLinuXino-Lime2 and A20-Olimex-SOM-EVBTom Rini
When moving the PHYLIB PHY drivers around in Kconfig we did not at the same time perform a careful migration of the related drivers and sub-options. This lead to the case where previously Kconfig-enabled driver choices were now disabled on some platforms. Correct this by enabling both the PHY driver and sub-option on the above referenced platforms. Fixes: af2cbfd6b982 ("drivers: net: Provide Kconfig menu for PHYLIB") Fixes: 8728c97eff5b ("configs: Re-sync") Reported-by: Dario <dario86@tutamail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2Marek Vasut
Synchronize R-Car Gen3 device trees with Linux 5.6.2, commit 9fbe5c87eaa9b72db08425c52c373eb5f6537a0a . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-28ARM: rmobile: Unify Gen3 Salvator-X(S) and ULCB defconfigsMarek Vasut
The r8a779{5,6,65}_salvator-x and r8a779{5,6,65}_ulcb_defconfig were building the same target, except for the default DT. The default DT is however only a detail, as the actual DT to be used to configure U-Boot is detected automatically based on the CPU ID, hence the default DT is not meaningful. Unify each three defconfigs per board to reduce the duplication. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-28Merge tag 'u-boot-amlogic-20200428' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - fix sd-emmc controller A init on G12A/G12B/SM1 SoCs - add GXBB USB PHY driver - enable access to SPI NOR Flash on VIM2 and VIM3/VIM3L boards - fix USB PHYs Power-Up on on VIM3/VIM3L boards
2020-04-28Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2020-04-28configs: ls208xa: Enable GIC_V3_ITS configHou Zhiqiang
Enable GIC_V3_ITS config to initialize the GIC redistributor tables. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls1028a: Enable GIC_V3_ITS configHou Zhiqiang
Enable GIC_V3_ITS config to initialize the GIC redistributor tables. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls1088a: Enable GIC_V3_ITS configHou Zhiqiang
Enable GIC_V3_ITS config to initialize the GIC redistributor tables. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: khadas-vim3: enable support for SPI NOR flashNeil Armstrong
Enable the necessary configs to make usage of the SPI NOR Flash. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-28configs: khadas-vim2: enable support for SPI NOR flashNeil Armstrong
Add the necessary configs to use the SPI NOR flash. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-27Merge tag 'mips-pull-2020-04-27' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mips - brcmnand: fix missing code path from Linux driver - bmips: fix build error when disabling USB - mips: add option to restore original exception vector base - mips: fix off-by-one error when clearing gd_data - mips: minor fixes for compatibility with generic SPL framework - spl: refactor legacy image loading - spl: add LZMA decompression support for legacy images - Makefile: add target to build LZMA compressed U-Boot images - mtmips: refactor and rewrite low-level init code - mtmips: add and enable SPL support with LZMA - mtmips: add support for MT7628 reference board - mtmips: add support for VoCore/VoCore2 board
2020-04-27mips: Add support for SoM "VoCore2".Mauro Condarelli
Small patch to add support for VoCore/VoCore2 board. VoCore is open hardware and runs OpenWrt/LEDE. It has WIFI, USB, UART, 20+ GPIOs but is only one inch square. It will help you to make a smart house, study embedded system or even make the tiniest router in the world. Details about this SoM can be found at "https://vocore.io/v2.html". Signed-off-by: Mauro Condarelli <mc5686@mclink.it> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-27mips: mtmips: Increase CONFIG_SPL_SYS_MALLOC_F_LENStefan Roese
Since SPL now uses malloc to allocate the buffer for the compressed image before decompression to the destination address, we need to configure a big enough malloc space in SPL. 256k seems to be big enough even for the GARDENA board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27mips: mtmips: add support for mt7628-rfbWeijie Gao
This patch adds support for mt7628 reference board. SPL_DM and DT are not enabled for SPL to save about 17KiB for u-boot-spl.bin. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27mips: mtmips: enable SPL for all boardsWeijie Gao
This patch enables SPL for all mtmips boards. And also remove defconfig files which are intend to build ram bootable u-boot files. SPL_DM and OF_CONTROL are enabled for both boards. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27mips: mtmips: rewrite lowlevel codes of mt7628Weijie Gao
This patch rewrites the mtmips architecture with the following changes: 1. Move MT7628 soc parts into a subfolder. 2. Lock parts of D-Cache as temporary stack. 3. Reimplement DDR initialization in C language. 4. Reimplement DDR calibration in a clear logic. 5. Add full support for auto size detection for DDR1 and DDR2. 6. Use accurate CPU clock depending on the input xtal frequency for timer and delay functions. Note: print_cpuinfo() has incompatible parts with MT7620 so it's moved into mt7628 subfolder. Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27mips: mtmips: make use of sysreset-resetctrl for mt7628 socWeijie Gao
This patch replaces sysreset-syscon with sysreset-resetctrl for mt7628 soc. Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27configs: enable CONFIG_RESTORE_EXCEPTION_VECTOR_BASE for all mtmips boardsWeijie Gao
This patch enables CONFIG_RESTORE_EXCEPTION_VECTOR_BASE for all mtmips boards. Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27ARM: zynq: Change SYS_MALLOC_LEN in zynq_cse_nand_defconfigT Karthik Reddy
nand_scan_tail() function allocates memory dynamically for struct nand_buffers which needs ~21kbytes of memory. But the memory alloted with CONFIG_SYS_MALLOC_LEN is 4k which is insufficient. Increase CONFIG_SYS_MALLOC_LEN to 32Kbytes from which struct nand_buffers uses ~21kbytes & remaining memory is used for other. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-27xilinx: Enable MTD and UBIFS for zynq and zynqmpMichal Simek
Both of them have nand controller that's why it is good to enable it because these configurations are also covered by testing. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-27ARC: HSDK: split HSDK and HSDK-4xD DTSEugeniy Paltsev
Split HSDK and HSDK-4xD device tree files so they can have different model names. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-27ARC: HSDK-4xD: add initial board supportEugeniy Paltsev
Add initial HSDK-4xD board support. The ARC HS4x/HS4xD Development Kit includes a multicore ARC HS4xD-based chip that integrates a wide range of interfaces including Ethernet, HDMI, WiFi, Bluetooth, USB, SDIO, I2C, SPI, UART, I2S, ADC, PWM and GPIO, as well as a Think Silicon GPU. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-27configs: socfpga: arria10: Enable USB supportLey Foon Tan
Enable configs to support USB in Arria 10. CONFIG_CMD_USB=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_DWC2=y Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-04-24arm: add Cubieboard7 board supportAmit Singh Tomar
The Cubieboard is a single board computer containing a Actions S700 SoC(with 4 ARMv8 Cortex-A53 cores). This patch adds respective defconfig alongwith .dts(copied from Linux v5.5-rc6 with hash "b3a987b0264d"). Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24actions: Move defconfig options to KconfigAmit Singh Tomar
This patch moves some of the config options from bubblegum_96_defconfig to respective Kconfig files. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24clk: actions: Add common clock driverAmit Singh Tomar
This patch converts S900 clock driver to something common that can be used for other SoCs, for instance S700(few of clk registers are same). Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: actions: Add common framework for Actions Owl Semi SoCsAmit Singh Tomar
This commit adds common arch support for Actions Semi Owl series SoCs and removes the Bubblegum96 board files. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-26 17:12:01 +0000