summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2019-10-24arm64: zynqmp: Enables SPI_FLASH_BARMichal Simek
Enable the SPI flash Bank/Extended address register support for all ZynqMP boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24ARM: zynq: Disable fdt and evn exist for cse_qspiMichal Simek
Mini u-boot should be really small that's why it is necessary to disable all unneeded configs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24ARM: zynq: Remove unused board_early_init_f()Michal Simek
board_early_init_f added by commit e6cc3b25d721 ("arm: zynq: Wire watchdog internals") is no longer needed that's why remove it also with Kconfig enabling. Fixes: ccd063e9812a ("watchdog: Move watchdog_dev to data section (BSS may not be cleared)") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24ARM: zynq: Dont use 4K sector size support for mini qspi configurationMichal Simek
This patch removes 4K sector size support for Zynq mini qspi configuration in favour of fast erase speed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Dont use 4K sector size support for mini qspi configurationSiva Durga Prasad Paladugu
This patch removes 4K sector size support for ZynqMP mini qspi configuration in favour of fast erase speed. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable Micrel phy support for xilinx zc1275 revBSiva Durga Prasad Paladugu
This patch enables Micrel phy support for Xilinx ZynqMP zc1275 revB board. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable BDI for mini mtest configurationMichal Simek
bdi is useful to see how memory is mapped. Also enable 3 memory banks to be mapped. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add support for zcu216Michal Simek
zcu104/6 defconfig was used as source. Standard features are enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add support for m-a2197-03Michal Simek
It is based on m-a2197-01 with some changes in i2c intrastructure. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add support for m-a2197-02Michal Simek
It is based on m-a2197-01 with some changes in i2c intrastructure. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24zynqmp: configs: Add single nand flash mini u-boot configurationT Karthik Reddy
This patch adds configuration for single nand flash mini u-boot. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable UHS supportSiva Durga Prasad Paladugu
This patch enables UHS support for Versal platforms. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable bit stream loading support for versal platform.Siva Durga Prasad Paladugu
This patch enables bitstream loading support for Versal platform. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Update boot delay to perform autobootSiva Durga Prasad Paladugu
Update boot delay to 5 for performing autoboot. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Increase SYS_MALLOC_F_LENSiva Durga Prasad Paladugu
This patch increases SYS_MALLOC_F_LEN as the versal clock driver needs to be probed before relocation itself inorder to get required clocks before relocation. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable CLK commandSiva Durga Prasad Paladugu
Enables clock command for dumping clocks. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable USB driver supportMichal Simek
This patch adds usb host and device mode support for Xilinx Versal virtual platform. By default USB host functionality is enabled. To use in usb device mode, set dr_mode property in DT to peripheral. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable LIBFDT_OVERLAYMichal Simek
Enable device tree overlay to build all dtbs for Versal with -@ flag to enable applying overlays. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Sync names for SC with VersalMichal Simek
ZynqMP based System controller is present on Versal boards. This patch is aligning names with Versal to follow the spec. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24ARM: zynq: Move BOOTM_NETBSD to KconfigMichal Simek
The commit 4b0bcfa7c4ec ("Kconfig: Migrate CONFIG_BOOTM_* options") moved BOOTM_ options to Kconfig that's why align zynq defconfig with it. Disabling NETBSD was done by commit d6f48ea5ce18 ("ARM: zynq: Do not enable NETBSD support by default"). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable GPIO command for VersalMichal Simek
Enable GPIO command for Xilinx Versal platform. Driver is updated that's why it can be used directly. Driver is enabled by default through Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Add support for HyperBus Memory Controller of TI's J721e and AM654 SoCs (Vignesh)
2019-10-24configs: sam9x60ek: enable microchip_flexcom, i2c and eepromEugen Hristev
enable driver model for i2c, eeprom for mac retrieval from eeprom i2c memory, and microchip_flexcom driver. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-24configs: sei610: khadas-vim3 : disable Gadget support for the DWC3Jean-Jacques Hiblot
Those platform use the DWC2 controller for the gadget support and the DWC3 for host-only operations. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24configs: k2g_evm_defconfig: disable XHCI_DWC3 and enable KEYSTONE_USB_PHYJean-Jacques Hiblot
KEYSTONE_USB_PHY is now required for proper USB operations. XHCI_DWC3 can be disabled as the xhci-dwc3 is not used anymore USB_DWC3_GADGET can also be removed, it is now selected automatically. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24usb: dwc3: Kconfig: get rid of obsolete mode selectionJean-Jacques Hiblot
The mode selection for the DWC3 is kind of obsolete. The driver does not have to be host only or gadget only. This choice is confusing. All the remaining callers of dwc3_uboot_init() explicitly set dr_mode before calling the function, so none rely on a default behavior. Remove the choice menu and keep only the USB_DWC3_GADGET option. Enable it by default if USB_GADGET and USB_DWC3 are enabled. It must be disabled for the evb-rk3328 as it uses DWC2 for the gadget and DWC3 for the host. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24usb: host: remove the xhci-zynqmp driverJean-Jacques Hiblot
This driver is not used anymore. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24configs: j721e_evm_a72_defconfig: Add HBMC related configsVignesh Raghavendra
Enable HBMC and HyperFlash in A72 SPL and A72 U-Boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
2019-10-23configs: j721e_evm_a72: Enable configs for UFSFaiz Abbas
Enable SCSI and UFS related configs. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-22configs: stm32h743-eval: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32h743-disco: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32f469-discovery: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32f429-evaluation: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32f429-discovery: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-18Merge tag 'efi-2020-01-rc1-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-01-rc1 (2) Install the simple file protocol only if there is a file system on the partition. Enable CONFIG_CMD_NVEDIT_EFI on QEMU.
2019-10-18configs: sei610: Add config file to fix userdata sizeGuillaume La Roque
Add separate config file to handle the different eMMC size on the sei610 board. Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18boards: amlogic: add SEI610 supportNeil Armstrong
Add support for the customer board SEI610 manufactured by SEI Robotics with the following specifications: - Amlogic S905X3 ARM Cortex-A55 quad-core SoC - 2GB DDR4 SDRAM - 10/100 Ethernet (Internal PHY) - 1 x USB 3.0 Host - 1 x USB Type-C DRD - 1 x FTDI USB Serial Debug Interface - eMMC - SDcard - Infrared receiver - SDIO WiFi Module Like it's SEI510 counterpart, the boot flow is designed to boot Android AOSP built for the Yukawa Android device. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18configs: sei510: enable everything-else power domainNeil Armstrong
The GX VPU Power Domain driver has been replaced by the Everything-Else Power Domain driver for G12A and SM1. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18configs: Add Khadas VIM3 defconfigAndreas Färber
Derived from odroid-n2_defconfig and README.odroid-n2. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18configs: sei510: enable Video Display supportNeil Armstrong
Add the necessary config options to support BMP display over HDMI, and add a preboot command to load the BMP file from a predefined eMMC partition. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-17efi_loader: enable CONFIG_CMD_NVEDIT_EFI on QEMUHeinrich Schuchardt
To reduce the default image size CONFIG_CMD_NVEDIT_EFI was disabled by default. Re-enable it on the QEMU platforms supporting the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-16Merge tag 'dm-pull-15oct19' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman enhancements: - Dropping some test Elf files and building them from source instead - Refactoring of x86 16-bit entries - Support for SPL symbols within sections - Handle the 'notes' sections and hidden symbols in recent binutils - Improved error reporting with a tool fails libfdt and documentation fixes vboot required-key test driver model power-domain controls patman Message-Id enhancement
2019-10-16arm: remove the H2200 boardHeinrich Schuchardt
U-Boot cannot be built for h2200_defconfig with CONFIG_DM=y. The maintainer Lukasz Dalek suggested to remove the board. https://lists.denx.de/pipermail/u-boot/2019-August/380685.html Cc: Lukasz Dalek <luk0104@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [trini: As this is the last non-toradex PXA board, update travis too] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-15sandbox64: enable command aesPhilippe Reynes
This commit add the support of command aes. Then, it may be used on pytest. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-10-15sandbox: enable command aesPhilippe Reynes
This commit enable the command aes on sandbox. Then, it may be used on pytest. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-10-14Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- vining_fpga updates
2019-10-14Merge tag 'u-boot-imx-20191014' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191014 ------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/597498628 - logicpd pinmux - i.MX7ULP: imx_ddr_size - fixes Toradex i.MX6/i.MX7 - pico-imx7d - tpc70 converted to DM - New Board: meerkat96 - add HAB version command - i.MX8 : imx8: Jump from alias to OCRAM address at SPL init imx8qm/qxp: Set SPL TEXT base to OCRAM base
2019-10-13stm32mp1: configs: add display devicesYannick Fertré
Add support of panels otm8009A, RM68200 & DSI controller. Limit resolution to 1280x800. Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13board: Add STM32F769 SoC, discovery board supportYannick Fertré
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13dm: Add a dsi host uclassYannick Fertré
Display Serial Interface (DSI) host can usefully be modelled as their own uclass. DSI defines a serial bus and a communication protocol between the host and the device (panel, bridge). Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
generated by cgit (git 2.34.1) at 2025-01-09 06:11:12 +0000