summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2018-10-22Merge git://git.denx.de/u-boot-x86Tom Rini
2018-10-22ARM: omap3_logic: Add NOR Flash Support for SOM-LVAdam Ford
The DM37 and OMAP35 SOM-LV SOM-LV products both support a NOR flash part connected to CS2 in addition to the NAND part on CS0. This patch setups the GPMC timings for the MT28 NOR Flash and enables the CFI-Flash driver now that the CFI stuff is in Kconfig Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22arm: udoo: Convert to distro configMeul, Dirk
Instead of keeping a custom environment, use a more generic approach by switching to distro config. Signed-off-by: Dirk Meul <dirk.meul@rwth-aachen.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2018-10-22configs: sama5d2_ptc_ek: add default bootargs for MMC defconfigEugen Hristev
Add default bootargs for the MMC defconfig to use SD-Card as rootfs Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22configs: sama5d2_ptc_ek: add default bootargs for NAND defconfigEugen Hristev
Add the default kernel bootargs according to our NAND flash demo layout: http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d2PtcEKMainPage#NAND_Flash_demo_Memory_map Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22configs: sama5d2_xplained: enable w1 and overlay for emmc defconfigEugen Hristev
Enable onewire support and commands, fdt overlay for the emmc defconfig. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22configs: sama5d27_som1_ek: enable w1 and overlay for mmc1 defconfigEugen Hristev
Enable onewire support and commands, fdt overlay for the mmc1 defconfig. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22configs: at91: sama5: enable CMD_IMIEugen Hristev
Enable iminfo command with CONFIG_CMD_IMI Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22configs: at91: sam9x5: added FIT and iminfo supportEugen Hristev
Enabled FIT image support and iminfo command for FIT information. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22ARM: da850evm_direct_nor: Remove DM_I2C_COMPATAdam Ford
The da850evm does not need this enabled, so this removes a notice that appears during compile time that says "Please remove" Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22warp7: configs: add bl33 defconfigRui Miguel Silva
Add default configuration to run u-boot as BL33 in the ARM Trusted Firmware boot flow for AArch32 case. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Cc: u-boot@lists.denx.de
2018-10-22optee: adjust dependencies and default values for dramRui Miguel Silva
We may have, the not yet considered, scenario where OPTEE is loaded before u-boot and *not* by u-boot, e.g, the boot flow using the ARM Trusted Firmware (ATF), where in the 32bit flow is: BootRom->ATF(BL2)->Optee(BL32)->u-boot(BL33) In this case we need still to reserve the memory used by optee, to avoid for example to realocate ourself to the same address at the end of DRAM. So, we change here the dependencies on the OPTEE lib and we set the default size and base of TZRAM to zero. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Ryan Harkin <ryan.harkin@linaro.org> Cc: u-boot@lists.denx.de
2018-10-22Kconfig: Convert CONFIG_IMX_WATCHDOG to KconfigXiaoliang Yang
Move this option to Kconfig and tidy up the config file of eight boards which use it. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
2018-10-22imx: imx8qxp_mek: update to build image in U-BootPeng Fan
Update README Add imximage.cfg Update defconfig to include imximage.cfg Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-10-22imx: add i.MX8QXP MEK board supportPeng Fan
Add i.MX8QXP MEK board support Enabled pinctrl/clk/power-domain/mmc/i2c/fec driver. Added README file. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-10-22x86: qemu: enable CONFIG_SPL_DM_RTCHeinrich Schuchardt
Since commit 380d4f787a3f ("rtc: Allow use of RTC in SPL and TPL") qemu-x86_64_defconfig does not boot anymore. Fixes: 380d4f787a3f ("rtc: Allow use of RTC in SPL and TPL") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-22chromebook_samus: Increase pre-relocation memorySimon Glass
With bootstage now allocating pre-relocation memory the current amount available is insufficient. Increase it a little. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-19Convert CONFIG_FLASH_CFI_DRIVER et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_FLASH_CFI_DRIVER CONFIG_SYS_FLASH_USE_BUFFER_WRITE CONFIG_FLASH_CFI_MTD CONFIG_SYS_FLASH_PROTECTION CONFIG_SYS_FLASH_CFI Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-19arm: lpc32xx: add CONFIG_ARCH_LPC32XX build optionVladimir Zapolskiy
The explicit arch specific build symbol allows to group supported boards, generalize common config options and it will serve as a dependency for platform only drivers. Two related board defconfigs are resynced after the change. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-18ARM: rmobile: Enable cache command on Gen3Hiroyuki Yokoyama
This patch enables the cache command, mostly for convenience of testing. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-18ARM: rmobile: Remove console parameter from bootargs on Gen3Hiroyuki Yokoyama
This patch removes 'console=' argument, because kernel uses stdout-path as parameter. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-16arm64: zynqmp: Enable MP by default via KconfigMichal Simek
Simplify defconfig for ZynqMP but keep option not to enable it for mini targets. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: versal: Add Xilinx Versal Virtual QEMU boardMichal Simek
Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: zynqmp: Enable CDC ethernet gadget for zcu100/Ultra96Michal Simek
Ethernet is not present on this board that's why there are two other options how to wire the board to ethernet. The first is asix_eth usb host converter which is already enabled by default. The second option is to use USB CDC/RNDIS ethernet gadget. This patch is enabling CDC which is working with Linux. With new bind/unbind command there is no need to call usb_ether_init() from platform code and use for example these commands: bind /amba/usb0@ff9d0000/dwc3@fe200000 usb_ether dhcp unbind /amba/usb0@ff9d0000/dwc3@fe200000 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16xilinx: Sync defconfigs with current KconfigMichal Simek
There are some inconsistencies which should be fixed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm: zynq: Add support for DLC20 boardMichal Simek
Xilinx DLC20 has I2C0 with EEPROM(1KB), UART1, GPIO, SD0 (EMMC 4GB), USB0 device, ENET0, QSPI (16MB) and DDR(two of 256MB each). Boards have mix of Winbond/ST QSPIs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm: zynq: Enable FIT fpga loading in SPL for zc706Michal Simek
Enable loading FPGA from FIT image in SPL. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm: mx5: Add M53Menlo boardMarek Vasut
Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-15Merge tag 'arc-more-updates-for-2018.11-rc2-2' of git://git.denx.de/u-boot-arcTom Rini
More fixes and improvements for ARC here: Fixes (this time included for real): * Take care of global uninitialized variables They used to be put right after .bss section and were never zeroed as they should be. Now merged with normal .bss Improvements: * Print more verbose CPU info for boards built on real silicon * Add support for SD-card detection on all ARC boards * Quite a few fixes for IoT DK - Support reset by command - Print of CPU freq on boot - Link for eFlash etc
2018-10-12Merge git://git.denx.de/u-boot-sunxiTom Rini
[trini: Convert da850evm_nand defconfig now to to SPL_DM] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-12Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2018-10-12iot_dk: Link for eFlashAlexey Brodkin
That's what we'll have in production. But note it won't work for loading via JTAG as eFlash is not directly writable, one needs to use prebootloader to flash uboot.bin from SD-card into eFlash. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-12iot_dk: Disable networking supportAlexey Brodkin
There's no Ethernet controller on the board so no point in having networking support. This also saves us 5.5 kB of precious memory. | # bloat-o-meter u-boot.net u-boot.no_net_regex | tail -1 | Total: Before=127892, After=122334, chg -4.35% Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-12iot_dk: Add localversion stringAlexey Brodkin
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-10Merge tag 'dm-9oct18' of git://git.denx.de/u-boot-dmTom Rini
Test improvements to tidy up output and drop duplicate tests Sandbox SPL/TPL support Various dm-related improvements
2018-10-10ARM: meson: Add Khadas VIM2 board supportLoic Devulder
This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-10board: da8xxevm: Add SPL DM for serial, spiJagan Teki
This patch add SPL DM support for da8xxevm boards with SPL serial, SPI drivers supported via platdata. Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Adam Ford <aford173@gmail.com> #da850evm
2018-10-09pico-imx7d: Make SPL binary fit into 64kBFabio Estevam
Currently SPL binary is larger than 64kB, which is larger than CONFIG_SPL_MAX_SIZE defined in imx7_spl.h. This causes boot failure on the pico-mx7 targets. Remove CONFIG_SPL_LIBDISK_SUPPORT option for now, so that the SPL binary can fit into the 64kB range. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-10-09rtc: Allow use of RTC in SPL and TPLSimon Glass
Add Kconfig options so that the RTC can be used in SPL and TPL. This is helpful for accessing the contents of CMOS RAM, for example. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09Kconfig: Convert CONFIG_RTC_MC146818 to KconfigSimon Glass
Move this option to Kconfig and tidy up the two boards which use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09sandbox: Add a debug UARTSimon Glass
Add support for the debug UART so that sandbox provides build testing for this feature. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09log: Add helpers for common log levelsSimon Glass
At present to output a log message you need something like: log(UCLASS_SPI, LOCL_INFO, "message1"); log(UCLASS_SPI, LOCL_INFO, "message2"); but many files use the same category throughout. Also it is helpful to shorten the length of log names, providing helpers for common logging levels. Add some macros so that it is possible to do: (top of file, before #includes) #define LOG_CATEGORY UCLASS_SPI (later in the file) log_info("message1"); log_debug("message2"); log_err("message3"); Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-07Kconfig: sandbox: enable cmd_avb and dependenciesJens Wiklander
Enables cmd_avb and its dependencies need to run the AVB tests. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> [trini: Disable for sandbox_noblk] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-06ARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35 TorpedoAdam Ford
With the device trees doing most of the work of pin-muxing and DM doing much of the peripheral initialization, this creates new defconfig files for each of the Logic PD variants with proper register settings/pin-muxing. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Update MAINTAINERS entry] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-05arc: Add support for IoT development kitAlexey Brodkin
The DesignWare ARC IoT Development Kit is a versatile platform that includes the necessary hardware and software to accelerate software development and debugging of sensor fusion, voice recognition and face detection designs. More information is avaialble here [1] and here [2]. The board is based on real silicon with ARC EM9D-based Data Fusion IP Subsystem. It sports a rich set of I/O including * DW USB OTG * DW MobileStorage (used for micro SD-card) * GPIO * multiple serial interface including DW APB UART * ADC, PWM and eFlash, SRAM and SPI Flash memory * Real-Time Clock (RTC) * Bluetooth module with worldwide regulatory compliance (FCC, IC, CE, ETSI, TELEC) * On-board 9-axis sensor (gyro, accelerometer and compass) Extensible with Arduino, Pmod, mikroBUS connectors and a 2x18 extension header. One of the most interesting features for developers is built-in Digilent USB JTAG probe so only micro-USB cable is needed! [1] https://www.synopsys.com/dw/ipdir.php?ds=arc_iot_development_kit [2] https://www.synopsys.com/dw/doc.php/ds/cc/iot_dev_kit.pdf Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-03riscv: Add QEMU virt board supportBin Meng
This adds QEMU RISC-V 'virt' board target support, with the hope of helping people easily test U-Boot on RISC-V. The QEMU virt machine models a generic RISC-V virtual machine with support for the VirtIO standard networking and block storage devices. It has CLINT, PLIC, 16550A UART devices in addition to VirtIO and it also uses device-tree to pass configuration information to guest software. It implements RISC-V privileged architecture spec v1.10. Both 32-bit and 64-bit builds are supported. Support is pretty much preliminary, only booting to U-Boot shell with the UART driver on a single core. Booting Linux is not supported yet. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2018-10-03riscv: kconfig: Imply DM support for some common driversBin Meng
This implies DM support for some common drivers that are used on RISC-V. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2018-10-03riscv: kconfig: Select DM and OF_CONTROLBin Meng
RISC-V is a pretty new architecture and should support DM and OF_CONTROL by default. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2018-10-02Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
This is the PR for SPI-NAND changes along with few spi changes. [trini: Re-sync changes for ls1012afrwy_qspi*_defconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-30Merge git://git.denx.de/u-boot-dmTom Rini
generated by cgit (git 2.34.1) at 2025-01-01 11:12:15 +0000