summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2019-07-26remoteproc: k3_rproc: Rename to ti_k3_arm64_rprocLokesh Vutla
k3_rproc driver is specifically meant for controlling an arm64 core using TISCI protocol. So rename the driver, Kconfig symbol, compatible and functions accordingly. While at it drop this remoteproc selection for a53 defconfig. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-25net: davinci_emac: convert to using the driver modelBartosz Golaszewski
Now that we removed all legacy boards selecting TI_EMAC we can completely convert the driver code to using the driver model. This patch also updates all remaining users of davinci_emac. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Tested-by: Adam Ford <aford173@gmail.com> #am3517-evm & da850-evm Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2019-07-25Add support for the NXP LS1021A-TSN boardJianchao Wang
The LS1021A-TSN is a development board built by VVDN/Argonboards in partnership with NXP. It features the LS1021A SoC and the first-generation SJA1105T Ethernet switch for prototyping implementations of a subset of IEEE 802.1 TSN standards. Supported boot media: microSD card (via SPL), QSPI flash. Rev. A of the board uses a Spansion S25FL512S_256K serial flash, which is 64 MB in size and has an erase sector size of 256KB (therefore, flashing the RCW would erase part of U-Boot). Rev. B and C of the board use a Spansion S25FL256S1 serial flash, which is only 32 MB in size but has an erase sector size of 64KB (therefore the RCW image can be flashed without erasing U-Boot). To avoid the problems above, the U-Boot base address has been selected at 0x100000 (the start of the 5th 256KB erase sector), which works for all board revisions. Actually 0x40000 would have been enough, but 0x100000 is common for all Layerscape devices. eTSEC3 is connecting directly to SJA1105 via an RGMII fixed-link, but SJA1105 is currently not supported by uboot. Therefore, eTSEC3 is disabled. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Jianchao Wang <jianchao.wang@nxp.com> Signed-off-by: Changming Huang <jerry.huang@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> [Vladimir] Code taken from https://github.com/openil/u-boot (which itself is mostly copied from ls1021a-iot) and adapted with the following changes: - Add a008850 errata workaround - Converted eTSEC, MMC to DM to avoid all build warnings - Plugged in distro boot feature, including support for extlinux.conf - Added defconfig for QSPI boot - Added the board/freescale/ls1021atsn/README.rst for initial setup - Increased CONFIG_SYS_MONITOR_LEN so that the SPL malloc pool does not get overwritten during copying of the u-boot.bin payload from MMC to DDR. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-25arm: ls1021atwr: Convert to use driver model TSEC driverBin Meng
Now that we have added driver model support to the TSEC driver, convert ls1021atwr board to use it. This depends on previous DM series for ls1021atwr: http://patchwork.ozlabs.org/patch/561855/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> [Vladimir] Made the following changes: - Added 'status = "disabled";' for all Ethernet ports in ls1021a.dtsi - Fixed the confusion between the SGMII/TBI PCS for enet0 and enet1 - a mistake ported over from Linux. Each SGMII PCS lies on the private MDIO bus of the interface (and the RGMII enet2 has no SGMII PCS). - Added CONFIG_DM_ETH to all ls1021atwr_* defconfigs - Completely removed non-DM_ETH support from ls1021atwr - Changed "compatible" string from "fsl,tsec-mdio" to "fsl,etsec2-mdio" and from "fsl,tsec" to "fsl,etsec2" to match Linux
2019-07-25configs: ls1028a: enable networking options in rdb, qds defconfigAlex Marginean
Enables ethernet, MDIO, PHY drivers for LS1028A RDB and QDS. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-24test/py: Add base test case for A/B updatesRuslan Trofymenko
Add sandbox test for 'ab_select' command. Test: ./test/py/test.py --bd sandbox --build -k test_ab Signed-off-by: Ruslan Trofymenko <ruslan.trofymenko@linaro.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Alistair Strachan <astrachan@google.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-23Merge tag 'u-boot-stm32-20190723' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - add rtc driver for stm32mp1 - add remoteproc driver for stm32mp1 - use kernel qspi compatible string for stm32
2019-07-22rtc: Add rtc driver for stm32mp1Patrick Delaunay
Add support of STM32MP1 rtc driver. Enable it for basic and trusted configurations. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
2019-07-22configs: stm32mp15: enable stm32 remoteprocPatrick Delaunay
Activate the remote processor support for stm32mp15 configs. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-07-21Merge tag 'rockchip-for-v2019.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - rk3399 lpddr4 support - rk3399-rock960 board support improvement - Eliminate pyelftools dependency by make_fit_atf.py - clean up rockchip dts to use -u-boot.dtsi - use ARM arch/generic timer instead of rk_timer - clean up Kconfig options for board support
2019-07-20rockchip: evb-px5: switch to use ARM generic timerKever Yang
Default to use ARM generic timer in ARM64, switch from rk timer to generic timer. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368-lion: switch to use ARM generic timerKever Yang
Default to use ARM generic timer in ARM64, switch from rk timer to generic timer. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: enable TPL for evb-rk3288Kever Yang
Enable TPL for evb-rk3288 so that we can have a free size limited SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: add default TPL_LDSCRIPT value in KconfigKever Yang
We share the same TPL_LDSCRIPT for all rk3288 board, add default value in Kconfig. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368: default enable SPL LIBCOMMON and LIBGENERICKever Yang
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk322x: default enable SPL LIBCOMMON and LIBGENERICKever Yang
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3328: default enable SPL LIBCOMMON and LIBGENERICKever Yang
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: default enable SPL LIBCOMMON and LIBGENERICKever Yang
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368: use defaule value for SYS_MALLOC_F_LENKever Yang
There is no difference in rk3368 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3328: use defaule value for SYS_MALLOC_F_LENKever Yang
There is no difference in rk3328 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: use default value for SYS_MALLOC_F_LENKever Yang
There is no difference in rk3399 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: use default value for SYS_MALLOC_F_LENKever Yang
There is no difference in rk3288 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk322x: use defconfig for SYS_MALLOC_F_LENKever Yang
There is no difference in rk322x board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-21configs: rock-pi-4: Enable LPDDR4 supportJagan Teki
Due to foot-print issues, we have LPDDR4 code can be marked as CONFIG_RAM_RK3399_LPDDR4. So, enable it for Rock-PI-4 board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21configs: rockpro64: Enable LPDDR4 supportJagan Teki
Due to foot-print issues, we have LPDDR4 code can be marked as CONFIG_RAM_RK3399_LPDDR4. So, enable it for Rockpro64 board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19riscv: sifive: fu540: Setup ethaddr env variable using OTPAnup Patel
This patch extends SiFive FU540 board support to setup ethaddr env variable based on board serialnum read from OTP. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-19configs: rockchip: rock960: enable USB3 supportPeter Robinson
Enable USB3 support via the dwc3 XHCI driver. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-07-19configs: rockchip: rock960: Add support for USB ethernet adaptersPeter Robinson
As the Rock960 doesn't have an onboard wired ethernet interface it's useful to have some common USB wired ethernet devices added to enable testing. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-07-19configs: rockchip: rock960: enable DMA for SDHCI controllerPeter Robinson
Enable the SDMA controller so the eMMC connected to the SDHCI controller (sdhci@fe330000) can make use of it. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-07-19configs: rockchip: rock960: enable pmic and regulator commandsPeter Robinson
We have both PMIC and Regulator functionality so it's useful to be able to see output and debug with the commands enabled. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-07-19configs: rockchip: rock960: drop options for non-existent HWPeter Robinson
The Rock960 doesn't contain SPI flash so drop related config options. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-07-18Merge branch '2019-07-17-master-imports'Tom Rini
- Various FS/disk related fixes with security implications. - Proper fix for the pci_ep test. - Assorted bugfixes - Some MediaTek updates. - 'env erase' support.
2019-07-18board: Arcturus: ucp1020: Removing obsoleted stuffOleksandr Zhadan
Removed one of the defconfig(obsoleted) file and unused CONFIG_MMC_SPI definition to avoid confusion about if this board using non-DM stuff or not. uCP1020 is completely DM free board, tested and runs well. Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com> Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-18configs: mt7629_rfb: use arm arch timer instead of mtk timerWeijie Gao
This patch changes mt7629_rfb to use ARM's generic arch timer instead of MediaTek's soc timer. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-07-18Merge branch '2019-07-17-ti-imports'Tom Rini
- Bring in the first three series that we need in order to enhance the TI AM65x series support and then later introduce J721E support.
2019-07-17am335x_boneblack_vboot: Disable asm memcpy/memset in SPLTom Rini
In order to save a little space in SPL, do not use the asm versions of memcpy/memset. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-17configs: aspeed: Add HUSH and random ethernet addrJoel Stanley
Tests in test/py/tests/test_env.py like this fail without CONFIG_HUSH_PARSER: => => printenv test_env_0 ## Error: "test_env_0" not defined => .=> setenv test_env_0 => => echo $test_env_0 $test_env_0 => F We also want a mac address so the ethernet device works in qemu. Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-07-17configs: aspeed: Unset CONFIG_MMCJoel Stanley
The aspeed board does not have an upstream MMC driver. As CONFIG_MMC defaults on, the board would fail to build due to the CONFIG_DM_MMC migration: ===================== WARNING ====================== This board does not use CONFIG_DM_MMC. Please update the board to use CONFIG_DM_MMC before the v2019.04 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== Change the defconfig to disable MMC until a driver is submitted. Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-07-17configs: am65x_hs_evm: Add support for applying overlaysAndreas Dannenberg
This will allow for downloading and applying overlays from an MMC/SD boot media based on the overlay_files ENV variable containing a list of overlay files. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17configs: am65x_evm: Add support for applying overlaysAndreas Dannenberg
This will allow for downloading and applying overlays from an MMC/SD boot media based on the overlay_files ENV variable containing a list of overlay files. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17configs: am65x_hs_evm_a53: Increase malloc pool before relocationAndreas Dannenberg
The malloc pool used before relocation is getting tight leading to out of memory errors doing certain DM-related calls. Since we are running the A53 SPL out of DDR let's just go ahead and bump its size as used in U-Boot proper as well as SPL (via Kconfig default value) from 8KB to 32KB. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Andrew F. Davis <afd@ti.com>
2019-07-17configs: am65x_evm_a53: Increase malloc pool before relocationAndreas Dannenberg
The malloc pool used before relocation is getting tight leading to out of memory errors doing certain DM-related calls. Since we are running the A53 SPL out of DDR let's just go ahead and bump its size as used in U-Boot proper as well as SPL (via Kconfig default value) from 8KB to 32KB. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17configs: am65x_hs_evm_a53: Enable PCA953X-type GPIO driverAndreas Dannenberg
Enable GPIO driver for PCA953X-compatible I2C-based I/O expander which includes support for the TCA9554/PCA9554-type expander found on the AM654 EVM base board. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Andrew F. Davis <afd@ti.com>
2019-07-17configs: am65x_evm_a53: Enable PCA953X-type GPIO driverAndreas Dannenberg
Enable GPIO driver for PCA953X-compatible I2C-based I/O expander which includes support for the TCA9554/PCA9554-type expander found on the AM654 EVM base board. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17configs: am65x_hs_evm_defconfig: Enable I2C supportAndreas Dannenberg
Enable I2C via driver model as well as the associated set of U-Boot commands to allow us interacting with various I2C slave devices. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Andrew F. Davis <afd@ti.com>
2019-07-17configs: am65x_evm_defconfig: Enable I2C supportAndreas Dannenberg
Enable I2C via driver model as well as the associated set of U-Boot commands to allow us interacting with various I2C slave devices. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17configs: am65x_hs_evm: Add Support for eMMC bootAndreas Dannenberg
Add configs to support RAW boot mode in eMMC. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-17configs: am65x_evm: Add Support for eMMC bootFaiz Abbas
Add configs to support RAW boot mode in eMMC. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-17configs: am65x_hs_evm_r5: All sysfw to be loaded via MMCAndreas Dannenberg
Enable all the relevant configs that enables support for loading sysfw via MMC. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-17configs: am65x_evm_r5: All sysfw to be loaded via MMCAndreas Dannenberg
Enable all the relevant configs that enables support for loading sysfw via MMC. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
generated by cgit (git 2.34.1) at 2024-12-30 19:11:33 +0000