summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2019-10-24zynqmp: configs: Add single nand flash mini u-boot configurationT Karthik Reddy
This patch adds configuration for single nand flash mini u-boot. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable UHS supportSiva Durga Prasad Paladugu
This patch enables UHS support for Versal platforms. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable bit stream loading support for versal platform.Siva Durga Prasad Paladugu
This patch enables bitstream loading support for Versal platform. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Update boot delay to perform autobootSiva Durga Prasad Paladugu
Update boot delay to 5 for performing autoboot. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Increase SYS_MALLOC_F_LENSiva Durga Prasad Paladugu
This patch increases SYS_MALLOC_F_LEN as the versal clock driver needs to be probed before relocation itself inorder to get required clocks before relocation. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable CLK commandSiva Durga Prasad Paladugu
Enables clock command for dumping clocks. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable USB driver supportMichal Simek
This patch adds usb host and device mode support for Xilinx Versal virtual platform. By default USB host functionality is enabled. To use in usb device mode, set dr_mode property in DT to peripheral. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable LIBFDT_OVERLAYMichal Simek
Enable device tree overlay to build all dtbs for Versal with -@ flag to enable applying overlays. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Sync names for SC with VersalMichal Simek
ZynqMP based System controller is present on Versal boards. This patch is aligning names with Versal to follow the spec. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24ARM: zynq: Move BOOTM_NETBSD to KconfigMichal Simek
The commit 4b0bcfa7c4ec ("Kconfig: Migrate CONFIG_BOOTM_* options") moved BOOTM_ options to Kconfig that's why align zynq defconfig with it. Disabling NETBSD was done by commit d6f48ea5ce18 ("ARM: zynq: Do not enable NETBSD support by default"). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable GPIO command for VersalMichal Simek
Enable GPIO command for Xilinx Versal platform. Driver is updated that's why it can be used directly. Driver is enabled by default through Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-22configs: stm32h743-eval: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32h743-disco: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32f469-discovery: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32f429-evaluation: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32f429-discovery: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-18Merge tag 'efi-2020-01-rc1-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-01-rc1 (2) Install the simple file protocol only if there is a file system on the partition. Enable CONFIG_CMD_NVEDIT_EFI on QEMU.
2019-10-18configs: sei610: Add config file to fix userdata sizeGuillaume La Roque
Add separate config file to handle the different eMMC size on the sei610 board. Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18boards: amlogic: add SEI610 supportNeil Armstrong
Add support for the customer board SEI610 manufactured by SEI Robotics with the following specifications: - Amlogic S905X3 ARM Cortex-A55 quad-core SoC - 2GB DDR4 SDRAM - 10/100 Ethernet (Internal PHY) - 1 x USB 3.0 Host - 1 x USB Type-C DRD - 1 x FTDI USB Serial Debug Interface - eMMC - SDcard - Infrared receiver - SDIO WiFi Module Like it's SEI510 counterpart, the boot flow is designed to boot Android AOSP built for the Yukawa Android device. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18configs: sei510: enable everything-else power domainNeil Armstrong
The GX VPU Power Domain driver has been replaced by the Everything-Else Power Domain driver for G12A and SM1. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18configs: Add Khadas VIM3 defconfigAndreas Färber
Derived from odroid-n2_defconfig and README.odroid-n2. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18configs: sei510: enable Video Display supportNeil Armstrong
Add the necessary config options to support BMP display over HDMI, and add a preboot command to load the BMP file from a predefined eMMC partition. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-17efi_loader: enable CONFIG_CMD_NVEDIT_EFI on QEMUHeinrich Schuchardt
To reduce the default image size CONFIG_CMD_NVEDIT_EFI was disabled by default. Re-enable it on the QEMU platforms supporting the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-16Merge tag 'dm-pull-15oct19' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman enhancements: - Dropping some test Elf files and building them from source instead - Refactoring of x86 16-bit entries - Support for SPL symbols within sections - Handle the 'notes' sections and hidden symbols in recent binutils - Improved error reporting with a tool fails libfdt and documentation fixes vboot required-key test driver model power-domain controls patman Message-Id enhancement
2019-10-16arm: remove the H2200 boardHeinrich Schuchardt
U-Boot cannot be built for h2200_defconfig with CONFIG_DM=y. The maintainer Lukasz Dalek suggested to remove the board. https://lists.denx.de/pipermail/u-boot/2019-August/380685.html Cc: Lukasz Dalek <luk0104@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [trini: As this is the last non-toradex PXA board, update travis too] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-15sandbox64: enable command aesPhilippe Reynes
This commit add the support of command aes. Then, it may be used on pytest. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-10-15sandbox: enable command aesPhilippe Reynes
This commit enable the command aes on sandbox. Then, it may be used on pytest. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-10-14Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- vining_fpga updates
2019-10-14Merge tag 'u-boot-imx-20191014' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191014 ------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/597498628 - logicpd pinmux - i.MX7ULP: imx_ddr_size - fixes Toradex i.MX6/i.MX7 - pico-imx7d - tpc70 converted to DM - New Board: meerkat96 - add HAB version command - i.MX8 : imx8: Jump from alias to OCRAM address at SPL init imx8qm/qxp: Set SPL TEXT base to OCRAM base
2019-10-13stm32mp1: configs: add display devicesYannick Fertré
Add support of panels otm8009A, RM68200 & DSI controller. Limit resolution to 1280x800. Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13board: Add STM32F769 SoC, discovery board supportYannick Fertré
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13dm: Add a dsi host uclassYannick Fertré
Display Serial Interface (DSI) host can usefully be modelled as their own uclass. DSI defines a serial bus and a communication protocol between the host and the device (panel, bridge). Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13configs: icorem6: Enable nandbcb commandShyam Saini
This also enables mtd configs which are required by nandbcb command. This command would be used to configure boot control block(BCB) while writing spl image on nand device. Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-10-13imx8qm/qxp: Set SPL TEXT base to OCRAM baseYe Li
Modify the SPL TEXT base from OCRAM alias to OCRAM base 0x100000, so we can use full OCRAM not limit to 96KB Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-10-13imx: tpc70: Convert TPC70 (imx6q) board to use DM/DTS in SPL and u-bootLukasz Majewski
This patch converts the TPC70 to use driver model and device tree description in both SPL and u-boot proper. Notable changes (DM/DTS conversion): - PINCTRL{_IMX6} - DM_I2C - enable 'regulator' and 'pmic' commands - DM_MMC and BLK (USDHC) - DM_ETH - DM WDT (including SYSRESET) Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13pico-imx7d: add config to enable CAAMJun Nie
Add config to enable CAAM so that hardware random number generator works. Signed-off-by: Jun Nie <jun.nie@linaro.org>
2019-10-13ARM: imx6q_logic: Enable Pin muxing in SPLAdam Ford
With the 256KB of OCRAM available to SPL now, there should be enough room to enable the pinmuxing in SPL from the device tree. This patch enables SPL_PINCTRL et al and adds the serial and usdhc pin mux references to the -u-boot.dtsi file so the pins can be configured from the device tree. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-10-13ARM: imx6q_logic: Enable 256KB OCRAMAdam Ford
Since this board config only supports, the i.MX6D/i.MX6Q configurations, 256K of on-chip RAM is available which increases the space available to SPL to help further reduce board code and further enable device tree functions. This patch enables 256K of RAM. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-13board: tbs2910: Convert eth to driver modelSoeren Moch
So we can remove lots of legacy config code. Signed-off-by: Soeren Moch <smoch@web.de>
2019-10-13board: tbs2910: Convert pci to driver modelSoeren Moch
So we can get rid of legacy pci config code. PCI_PNP is not required for this board, remove it to reduce the size of the u-boot binary. DM_PCI does not start the host controller automatically anymore. Do so in preboot instead. Signed-off-by: Soeren Moch <smoch@web.de>
2019-10-13Add i.MX7D based Meerkat96 board supportShawn Guo
The Meerkat96 board, based on the NXP i.MX7D SoC, is a member of 96Boards community and complies with all Consumer Edition board specifications. https://www.novtech.com/products/meerkat96.html https://www.96boards.org/product/imx7-96/ The initial supported/tested devices include: - Debug serial - SD - USB Host (with Ethernet) With these support, it's good enough for loading Linux Kernel from SD or Ethernet over USB. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-10-12Merge branch '2019-10-11-master-imports'Tom Rini
- Assorted cleanups - FAT bugfixes - mediatek platform updates
2019-10-11sandbox: Remove sandbox_noblk buildTom Rini
At this point, all drivers that do not use CONFIG_BLK are past their migration deadlines, so remove this config as it's no longer helpful and hinders enhancing block drivers. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-11configs: am43xx_evm: Enable USB supportLokesh Vutla
spl_dm_init is failing as usb to be probed with the following error: "omap_dwc3@483c0000: ret=-2" Enable usb to make spl boot on am43xx devices Reported-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11board: ti: am335x-ice: Configure the CDCE913 clock synthesizerTero Kristo
AM335x-ICE boards contain the CDCE913 clock synthesizer, and their reset crystal capacitance load value of 10pF is wrong leading into lost packets in certain networking tests. Add DT data for this device, and probe it from the board file to program the crystal capacitance load value to 0pF to avoid any problems. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-11board: ti: am43xx-idk: Configure the CDCE913 clock synthesizerTero Kristo
AM43xx-IDK boards contain the CDCE913 clock synthesizer, and their reset crystal capacitance load value of 10pF is wrong leading into lost packets in certain networking tests. Add DT data for this device, and probe it from the board file to program the crystal capacitance load value to 0pF to avoid any problems. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-11board: ti: am57xx-idk: Configure the CDCE913 clock synthesizerTero Kristo
AM57xx-IDK boards contain the CDCE913 clock synthesizer, and their reset crystal capacitance load value of 10pF is wrong leading into lost packets in certain networking tests. Add DT data for this device, and probe it from the board file to program the crystal capacitance load value to 0pF to avoid any problems. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-11configs: am65x_evm_a53: Enable DISPLAY_CPUINFOLokesh Vutla
Enable CONFIG_DISPLAY_CPUINFO so that cpuinfo is printed during boot. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11configs: j721e_evm_a72: Enable DISPLAY_CPUINFOLokesh Vutla
Enable CONFIG_DISPLAY_CPUINFO so that cpuinfo is printed during boot. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11configs: j721e_evm_a72: Disable PSCI_RESETLokesh Vutla
J721E uses TISCI protocol to reset the device and does not support PSCI reset. So disable PSCI reset. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
generated by cgit (git 2.34.1) at 2024-12-24 12:45:51 +0000