summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2020-08-11ARM: omap3: evm: Complete DM_ETH and DM_USB migrationsDerald D. Woods
This commit completes the migrations for DM_ETH and DM_USB. The board is now consistent with omap3_beagle and other remaining OMAP3 boards. Cc: Tom Rini <trini@konsulko.com> Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2020-08-10configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-08Convert CONFIG_SYS_MMC_ENV_DEV et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-07test/py: Add tests for the SquashFS commandsJoao Marcos Costa
Add Python scripts to test 'ls' and 'load' commands. The scripts generate a SquashFS image and clean the directory after the assertions, or if an exception is raised. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07cmd: Update the memory-search commandSimon Glass
Add various fixes and improvements to this command that were missed in the original version. Unfortunately I forgot to send v2. - Fix Kconfig name - Use a separate variable for the remaining search length - Correct a minor bug - Move into a separate test suite - Add -q flag to the 'quiet' test to test operation when console is enabled - Enable the feature for sandbox Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-06arm: mvebu: Update CRS305-1G-4S board flash layoutLuka Kovacic
Update the MikroTik CRS305-1G-4S flash layout to support redundant UBI partitions. Additionally enable the UBI commands in crs305-1g-4s_defconfig. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-08-06arm: mvebu: Add CRS328-4C-20S-4S boardLuka Kovacic
MikroTik CRS328-4C-20S-4S board has a switch chip with an integrated Marvell Prestera 98DX3236 CPU. This commit includes two board variants, namely the factory default one and a Bit variant. The Bit board variant has a bigger Macronix flash. Add basic U-Boot, UART and SPI flash support. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-08-06arm: mvebu: Add CRS326-24G-2S boardLuka Kovacic
MikroTik CRS326-24G-2S board has a switch chip with an integrated Marvell Prestera 98DX3236 CPU. This commit includes two board variants, namely the factory default one and a Bit variant. The Bit board variant has a bigger Macronix flash. Add basic U-Boot, UART and SPI flash support. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-08-06arm: mvebu: Add CRS305-1G-4S Bit boardLuka Kovacic
MikroTik CRS305-1G-4S Bit board has a switch chip with an integrated Marvell Prestera 98DX3236 CPU. The Bit board variant is added, which has a bigger Macronix flash. Add basic U-Boot, UART and Winbond SPI flash support. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-08-05Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- r2dplus updates
2020-08-04arm: move CONFIG_PREBOOT="usb start" to KConfigJonas Smedegaard
This commit moves CONFIG_PREBOOT="usb start" to common/KConfig for all boards also declaring USB_KEYBOARD. Besides simplifying defconfig files, this also enables support for board-specific CONFIG_PREBOOT for sunxi boards: commit 37304aaf60bf ("Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig") intended to support CONFIG_PREBOOT, but include/configs/sunxi-common.h hardcodes preboot as part of internally defined CONSOLE_STDIN_SETTINGS, silently ignoring any board-specific CONFIG_PREBOOT. Signed-off-by: Jonas Smedegaard <dr@jones.dk> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Series-Cc: Jagan Teki <jagan@amarulasolutions.com> Series-Cc: Lukasz Majewski <lukma@denx.de> Series-Cc: Andre Przywara <andre.przywara@arm.com>
2020-08-04Merge tag 'u-boot-imx-20200804' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2020.10 ----------- - fixes for Toradex board - fix warnings from previous PR - HAB: reset instead of panic after failure - new board: MYiR Tech MYS-6ULX - mx6cuboxi: use OF_PLATDATA - further changes for DM Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/714513163
2020-08-04Merge tag 'fixes-for-2020.10-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - Fix tbs2910 vidconsole environment - Fix ipuv3 framebuffer output on i.MX6Q/D
2020-08-04Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- add DM based reset driver for SiFive SoC's.
2020-08-04configs: reset: fu540: enable dm reset framework for SiFiveSagar Shrikant Kadam
Add necessary defconfig and Kconfig entries to enable SiFive SoC's reset driver so as to utilise U-Boot's reset framework. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-08-03board: tbs2910: Fix video output with existing environmentsSoeren Moch
Migration to DM_VIDEO changed the output device name (in stout, stderr) from 'vga' to 'vidconsole'. This also was adapted in the default environment. However, existing user defined environments still use 'vga'. Enable this workaround to map the 'vga' name to 'vidconsole'. So we get HDMI video output also with existing legacy environments. Signed-off-by: Soeren Moch <smoch@web.de>
2020-08-03mips: octeon: Update EBB7304 defconfigStefan Roese
This patch enables the following options for the Octeon EBB7304 EVB: - PCI & DM_PCI - DM_SPI_FLASH & SPI flash device support - SPI & Octeon SPI driver - GPIO cmd support - I2C cmd support Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03configs: pico-imx6: convert ethernet function to DM_ETHWig Cheng
Before enable _DM_ETH: Net: FEC [PRIME] After enable DM_ETH: Net: eth0: ethernet@2188000 Here is the test commands: => dhcp BOOTP broadcast 1 DHCP client bound to address 10.88.88.152 (146 ms) *** ERROR: `serverip' not set Cannot autoload with TFTPGET => ping 8.8.8.8 Using ethernet@2188000 device host 8.8.8.8 is alive Signed-off-by: Wig Cheng <wig.cheng@technexion.com>
2020-08-03arm: imx6q: pcm058: Rework SPI NOR configurationNiel Fourie
Enable CONFIG_SPL_DM_SPI_FLASH to be able to boot from SPI NOR, modify the offset of U-boot proper in the SPI NOR, so the difference in offset matches between SPL and U-boot matches that of the SD Card, allowing u-boot-with-spl.imx to also be copied to SPI NOR at an offset of 0x400. Update the README to reflect this change. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-08-03imx: Add MYiR Tech MYS-6ULX supportParthiban Nallathambi
MYS-6ULX is single board computer (SBC) comes with eMMC or NAND based on imx6ULL SoC from NXP and provision for expansion board. This commit adds support only for SBC with NAND. CPU: Freescale i.MX6ULL rev1.1 528 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 45C Reset cause: WDOG Model: MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND Board: MYiR MYS-6ULX 6ULL Single Board Computer DRAM: 256 MiB NAND: 256 MiB MMC: FSL_SDHC: 0 In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: FEC0 Working: - Eth0 - MMC/SD - NAND - UART 1 - USB host Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
2020-08-02sh: r2dplus: Enable additional PCI ethernet devicesMarek Vasut
Enable these extra PCI ethernet devices, so they can be tested in CI. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-08-02sh: r2dplus: Enable DM_SERIAL and DM_CLKMarek Vasut
Switch r2dplus to DM and DT probing for serial and clock. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-08-02sh: r2dplus: Add pci enum to prebootMarek Vasut
The ethernet on r2dplus is on PCI bus, enumerate the PCI early to get the ethernet operational. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-08-02sh: r2dplus: Switch to DM ETHMarek Vasut
Enable DM ethernet support for the board, now that rtl8139 is converted. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-08-02mx6cuboxi: enable OF_PLATDATAWalter Lozano
As both MMC and GPIO driver now supports OF_PLATDATA, enable it in defconfig in order to reduce the SPL footprint. After applying this setting the SPL reduction is 5 KB, which partially compensates the increment due to DM. Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-01configs: reduce stack size of Sipeed MAIXHeinrich Schuchardt
The K210 has only 8 MiB RAM thereof 2 MiB reserved for AI. Allow only 1 MiB for the stack. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-31test: sandbox: add test for erase commandPatrick Delaunay
Add test for the erase command tested on ENV in EXT4. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31configs: sandbox: activate command env select and env loadPatrick Delaunay
Add support of environment location with the new env command: 'env select' and 'env load' The ENV backend is selected by priority order - 0 = "nowhere" (default at boot) - 1 = "EXT4" To test EXT4 env support, this backend is selected by name: > env select EXT4 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31configs: sandbox: activate env in ext4 supportPatrick Delaunay
Activate ENV in EXT4 support in sandbox. The sandbox behavior don't change; the default environment with the nowhere backend (CONFIG_ENV_IS_NOWHERE)is still used: the weak function env_get_location() return ENVL_NOWHERE for priority 0. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-29Merge tag 'dm-pull-28jul20' of git://git.denx.de/u-boot-dmTom Rini
Use binman instead of one of the Rockchip build scripts Refactor to allow any arch to create SPI-flash images New button uclass
2020-07-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-stmTom Rini
- fix SPL boot issue due to early dbgmcu_init() call - fix SPL boot issue due to dcache memory region configuration - add support of CONFIG_ENV_IS_IN_MMC - add specific SD/eMMC partition for U-Boot enviromnent - enable env in SPL - use "env info -q" to remove log during boot - remove env location override for dh_stm32mp1 - update management of misc_read - check result of find_mmc_device in stm32prog - use regulator_set_enable_if_allowed for disabling vdd supply in usbphyc - enable CMD_ADTIMG flag to handle Android images - device tree alignment with Linux Kernel v5.8-rc1 - remove hnp-srp-disable for usbotg on dk1 - add reset support to uart nodes on stm32mp15x - use correct weak function name spl_board_prepare_for_linux - use cd-gpios for ST and DHSOM boards - add seeed studio odyssey-stm32mp157c board support - move ethernet PHY into SoM DT - add DHSOM based DRC02 board support
2020-07-29configs: ns3: enable tee and optee driverRayagonda Kokatanur
Enable tee and optee drivers. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable FIT configRayagonda Kokatanur
Enable FIT config for NS3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable sp805 watchdog driverRayagonda Kokatanur
Enable sp805 watchdog driver for ns3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable EXT4 and FAT fs supportRayagonda Kokatanur
Enable EXT4 and FAT fs support for ns3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable gpt commandsRayagonda Kokatanur
Enable gpt commands for ns3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable mmc commandsRayagonda Kokatanur
Enable mmc commands for NS3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable BCM IPROC mmc driverRayagonda Kokatanur
Enable BCM IPROC mmc driver ns3. Enable DMA for MMC Host to have better reads and writes. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable pinctrl driverRayagonda Kokatanur
Enable pinctrl driver for ns3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: ns3: define ddr memory layoutRayagonda Kokatanur
Add both DRAM banks memory information and the corresponding MMU page table mappings. Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable GIC_V3 ITSRayagonda Kokatanur
Enables the Generic Interrupt Controller (GIC) V3 Interrupt Translation Service (ITS) Locality-specific Peripheral Interrupts (LPI) configuration table and LPI table. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable clock subsystemRayagonda Kokatanur
Enable clock subsystem for ns3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: ns3: add support for Broadcom Northstar 3Rayagonda Kokatanur
Add support for Broadcom Northstar 3 SoC. NS3 is a octo-core 64-bit ARMv8 Cortex-A72 processors targeting a broad range of networking applications. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: mediatek: Add support for UniElec U7623 boardDavid Woodhouse
This is an MT7623A-based board, very similar to the Banana Pi R2. http://www.unielecinc.com/q/news/cn/p/product/detail.html?qd_guid=OjXwKCaRlN Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-07-29board: mediatek: Use CONFIG_DEFAULT_FDT_FILE for default environmentDavid Woodhouse
Rather than hard-coding it to the Banana Pi R2. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-07-29arm: add (default) config for nanopi2 boardStefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - Configuration changed, mainly several "CONFIG_..." moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig and USB related configs removed because USB is not supported yet. - s5p4418_nanopi2.h: "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable. - pinctrl is supported now, therefore "CONFIG_PINCTRL=y" added to s5p4418_nanopi2_defconfig. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29arm: qemu: disable the EFI workaround for older GRUBArd Biesheuvel
The QEMU/mach-virt targeted port of u-boot currently only runs on QEMU under TCG emulation, which does not model the caches at all, and so no users can exist that are relying on the GRUB hack for EFI boot. We will shortly enable support for running under KVM, but the GRUB hack (which disables all caches without doing cache cleaning by VA during ExitBootServices()) is likely to cause more problems than it solves, given that KVM hosts require correct maintenance if they incorporate non-architected system caches. So let's disable the GRUB hack by default on the QEMU/mach-virt port. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-29arm: qemu: enable LPAE on 32-bitArd Biesheuvel
QEMU's mach-virt machine only supports selecting CPU models that implement the virtualization extensions, and are therefore guaranteed to support LPAE as well. Initially, QEMU would not allow emulating these CPUs running in HYP mode (or EL2, for AArch64), but today, it also contains a complete implementation of the virtualization extensions themselves. This means we could be running U-Boot in HYP mode, in which case the LPAE long descriptor page table format is the only format that is supported. If we are not running in HYP mode, we can use either. So let's enable CONFIG_ARMV7_LPAE for qemu_arm_defconfig so that we get the best support for running with the MMU and caches enabled at any privilege level. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-28sandbox: enable buttonPhilippe Reynes
Enable the support of button (driver and command) on sandbox. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-07-28sandbox64: enable buttonPhilippe Reynes
Enable the support of button (driver and command) on sandbox64. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
generated by cgit (git 2.34.1) at 2024-12-23 18:30:37 +0000