summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2018-11-07imx8qxp_mek: Disable CONFIG_DISPLAY_CPUINFOBin Meng
Due to revert of commit c0434407b595, this board does not build any more. Disable CONFIG_DISPLAY_CPUINFO for v2018.11 release. This commit should be reverted after v2018.11 release. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-02Merge tag 'arc-for-2018.11' of git://git.denx.de/u-boot-arcTom Rini
Just 2 non-functinal changes: 1. Rename of EMDK to EMSDP so it matches real marketing name 2. Add essential README for IoTDK
2018-11-01emdk->emsdp: Rename boardAlexey Brodkin
Real marketing name of the board was recently updated so to accommodate that change renaming the board and all related to it. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-11-01configs: sama5d2_ptc_ek: read environment from FATAndrei.Stefanescu@microchip.com
On our demo setup for SD card boot, the u-boot environment is in a FAT partition. This patch changes the default configuration, specifing that the u-boot environment is in a FAT partition instead of raw MMC. Signed-off-by: Andrei Stefanescu <andrei.stefanescu@microchip.com> Acked-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-29Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2018-10-29sunxi: disable Pine A64 model detection code on other boardsIcenowy Zheng
The Pine A64 Plus/non-Plus model detection code is now built on all 64-bit ARM SoCs, even if the code cannot be triggered when H5/H6 is in use. Disable them when the board is Pine A64 by adding a Kconfig option that is only selected on Pine A64. On GCC 7.3.1 this makes the size of the function reduces 184 bytes, and saves a 104 byte strstr() function, then makes SPL on H6 succeed to build. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-10-28x86: theadorable-x86-xxx_defconfig: Move VGA BIOS to make room for U-BootStefan Roese
The build breaks because its not fitting the U-Boot binary into the ROM image. So lets move VGA BIOS a bit to make room for the grown U-Boot binary. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-28x86: theadorable-x86: Generate and pass root=PARTUUID instead of /dev/sdaXStefan Roese
To enable the root device selection (kernel cmd-line) via PARTUUID, this patch enables CMD_PART on all missing theadorable-x86 boards and changes the default environment to generate the root=PARTUUID string automatically. This fixes problems that have been noticed on systems with multiple SATA/AHCI controller connected via PCIe, where the device name for the root device / partition (/dev/sdaX) was incorrect. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-26vf610twr: Enable thumb2 for buildsTom Rini
To help with size constraints, enable thumb2 when building. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-25Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini
2018-10-25Merge tag 'u-boot-imx-20181025' of git://git.denx.de/u-boot-imxTom Rini
Merged imx8 architecture, fix build for imx8 + warnings
2018-10-24configs: migrate CONFIG_PHY_AQUANTIA to KconfigJeremy Gebben
The aquantia driver requires both CONFIG_PHY_GIGE and CONFIG_PHYLIB_10G. Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-23ARM: Samsung: Add Exynos5422-based Odroid HC2 supportDirk Meul
Odroid HC2 board is based on Odroid XU4 board, like the Odroid HC1. The linux kernel does not provide a hc2 DTB so the hc1 DTB is also used for the Odroid HC2. Resend because MUA changed whitespace. Signed-off-by: Dirk Meul <dirk.meul@rwth-aachen.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-10-22Merge git://git.denx.de/u-boot-x86Tom Rini
2018-10-22ARM: omap3_logic: Add NOR Flash Support for SOM-LVAdam Ford
The DM37 and OMAP35 SOM-LV SOM-LV products both support a NOR flash part connected to CS2 in addition to the NAND part on CS0. This patch setups the GPMC timings for the MT28 NOR Flash and enables the CFI-Flash driver now that the CFI stuff is in Kconfig Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22arm: udoo: Convert to distro configMeul, Dirk
Instead of keeping a custom environment, use a more generic approach by switching to distro config. Signed-off-by: Dirk Meul <dirk.meul@rwth-aachen.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2018-10-22configs: sama5d2_ptc_ek: add default bootargs for MMC defconfigEugen Hristev
Add default bootargs for the MMC defconfig to use SD-Card as rootfs Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22configs: sama5d2_ptc_ek: add default bootargs for NAND defconfigEugen Hristev
Add the default kernel bootargs according to our NAND flash demo layout: http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d2PtcEKMainPage#NAND_Flash_demo_Memory_map Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22configs: sama5d2_xplained: enable w1 and overlay for emmc defconfigEugen Hristev
Enable onewire support and commands, fdt overlay for the emmc defconfig. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22configs: sama5d27_som1_ek: enable w1 and overlay for mmc1 defconfigEugen Hristev
Enable onewire support and commands, fdt overlay for the mmc1 defconfig. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22configs: at91: sama5: enable CMD_IMIEugen Hristev
Enable iminfo command with CONFIG_CMD_IMI Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22configs: at91: sam9x5: added FIT and iminfo supportEugen Hristev
Enabled FIT image support and iminfo command for FIT information. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22ARM: da850evm_direct_nor: Remove DM_I2C_COMPATAdam Ford
The da850evm does not need this enabled, so this removes a notice that appears during compile time that says "Please remove" Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22warp7: configs: add bl33 defconfigRui Miguel Silva
Add default configuration to run u-boot as BL33 in the ARM Trusted Firmware boot flow for AArch32 case. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Cc: u-boot@lists.denx.de
2018-10-22optee: adjust dependencies and default values for dramRui Miguel Silva
We may have, the not yet considered, scenario where OPTEE is loaded before u-boot and *not* by u-boot, e.g, the boot flow using the ARM Trusted Firmware (ATF), where in the 32bit flow is: BootRom->ATF(BL2)->Optee(BL32)->u-boot(BL33) In this case we need still to reserve the memory used by optee, to avoid for example to realocate ourself to the same address at the end of DRAM. So, we change here the dependencies on the OPTEE lib and we set the default size and base of TZRAM to zero. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Ryan Harkin <ryan.harkin@linaro.org> Cc: u-boot@lists.denx.de
2018-10-22Kconfig: Convert CONFIG_IMX_WATCHDOG to KconfigXiaoliang Yang
Move this option to Kconfig and tidy up the config file of eight boards which use it. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
2018-10-22imx: imx8qxp_mek: update to build image in U-BootPeng Fan
Update README Add imximage.cfg Update defconfig to include imximage.cfg Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-10-22imx: add i.MX8QXP MEK board supportPeng Fan
Add i.MX8QXP MEK board support Enabled pinctrl/clk/power-domain/mmc/i2c/fec driver. Added README file. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-10-22x86: qemu: enable CONFIG_SPL_DM_RTCHeinrich Schuchardt
Since commit 380d4f787a3f ("rtc: Allow use of RTC in SPL and TPL") qemu-x86_64_defconfig does not boot anymore. Fixes: 380d4f787a3f ("rtc: Allow use of RTC in SPL and TPL") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-22chromebook_samus: Increase pre-relocation memorySimon Glass
With bootstage now allocating pre-relocation memory the current amount available is insufficient. Increase it a little. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-19Convert CONFIG_FLASH_CFI_DRIVER et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_FLASH_CFI_DRIVER CONFIG_SYS_FLASH_USE_BUFFER_WRITE CONFIG_FLASH_CFI_MTD CONFIG_SYS_FLASH_PROTECTION CONFIG_SYS_FLASH_CFI Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-19arm: lpc32xx: add CONFIG_ARCH_LPC32XX build optionVladimir Zapolskiy
The explicit arch specific build symbol allows to group supported boards, generalize common config options and it will serve as a dependency for platform only drivers. Two related board defconfigs are resynced after the change. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-18ARM: rmobile: Enable cache command on Gen3Hiroyuki Yokoyama
This patch enables the cache command, mostly for convenience of testing. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-18ARM: rmobile: Remove console parameter from bootargs on Gen3Hiroyuki Yokoyama
This patch removes 'console=' argument, because kernel uses stdout-path as parameter. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-16arm64: zynqmp: Enable MP by default via KconfigMichal Simek
Simplify defconfig for ZynqMP but keep option not to enable it for mini targets. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: versal: Add Xilinx Versal Virtual QEMU boardMichal Simek
Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: zynqmp: Enable CDC ethernet gadget for zcu100/Ultra96Michal Simek
Ethernet is not present on this board that's why there are two other options how to wire the board to ethernet. The first is asix_eth usb host converter which is already enabled by default. The second option is to use USB CDC/RNDIS ethernet gadget. This patch is enabling CDC which is working with Linux. With new bind/unbind command there is no need to call usb_ether_init() from platform code and use for example these commands: bind /amba/usb0@ff9d0000/dwc3@fe200000 usb_ether dhcp unbind /amba/usb0@ff9d0000/dwc3@fe200000 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16xilinx: Sync defconfigs with current KconfigMichal Simek
There are some inconsistencies which should be fixed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm: zynq: Add support for DLC20 boardMichal Simek
Xilinx DLC20 has I2C0 with EEPROM(1KB), UART1, GPIO, SD0 (EMMC 4GB), USB0 device, ENET0, QSPI (16MB) and DDR(two of 256MB each). Boards have mix of Winbond/ST QSPIs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm: zynq: Enable FIT fpga loading in SPL for zc706Michal Simek
Enable loading FPGA from FIT image in SPL. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm: mx5: Add M53Menlo boardMarek Vasut
Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-15Merge tag 'arc-more-updates-for-2018.11-rc2-2' of git://git.denx.de/u-boot-arcTom Rini
More fixes and improvements for ARC here: Fixes (this time included for real): * Take care of global uninitialized variables They used to be put right after .bss section and were never zeroed as they should be. Now merged with normal .bss Improvements: * Print more verbose CPU info for boards built on real silicon * Add support for SD-card detection on all ARC boards * Quite a few fixes for IoT DK - Support reset by command - Print of CPU freq on boot - Link for eFlash etc
2018-10-12Merge git://git.denx.de/u-boot-sunxiTom Rini
[trini: Convert da850evm_nand defconfig now to to SPL_DM] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-12Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2018-10-12iot_dk: Link for eFlashAlexey Brodkin
That's what we'll have in production. But note it won't work for loading via JTAG as eFlash is not directly writable, one needs to use prebootloader to flash uboot.bin from SD-card into eFlash. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-12iot_dk: Disable networking supportAlexey Brodkin
There's no Ethernet controller on the board so no point in having networking support. This also saves us 5.5 kB of precious memory. | # bloat-o-meter u-boot.net u-boot.no_net_regex | tail -1 | Total: Before=127892, After=122334, chg -4.35% Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-12iot_dk: Add localversion stringAlexey Brodkin
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-10Merge tag 'dm-9oct18' of git://git.denx.de/u-boot-dmTom Rini
Test improvements to tidy up output and drop duplicate tests Sandbox SPL/TPL support Various dm-related improvements
2018-10-10ARM: meson: Add Khadas VIM2 board supportLoic Devulder
This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-10board: da8xxevm: Add SPL DM for serial, spiJagan Teki
This patch add SPL DM support for da8xxevm boards with SPL serial, SPI drivers supported via platdata. Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Adam Ford <aford173@gmail.com> #da850evm
generated by cgit (git 2.34.1) at 2024-12-28 04:33:38 +0000