summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2020-04-14am335x, guardian: load env from NANDMoses Christopher
- As there is a requirement to store certain data, we need a persistent storage in u-boot. Hence, we need to save env in NAND - Add default Guardian environment variables - Update partition table: - Reserve some space for experimentation, this ensures proper backwards compatibility - Update defconfig accordingly Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
2020-04-14am335x, guardian: boot count is stored in AM3352 RTC blockMoses Christopher
- Move bootlimit to defconfig - Store bootcount in RTC block Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
2020-04-14am335x, guardian: boot stage feedback in headless modeMoses Christopher
This patch enables the guardian board to provide feedback about the boot stage in headless mode. The on-board led would behave in the following pattern * U-boot -> GLOW LED * Linux -> BLINK LED [HEART-BEAT PATTERN] Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
2020-04-14am335x, guardian: fix spl usb-eth bootMoses Christopher
- On Guardian board, usb-eth boot in SPL stage fails due to certain misconfiguration. Hence, add the same to fix the issue. - configs are set based on the conditional statement present in arch/arm/mach-omap2/am33xx/board.c - disable tiny printf in SPL stage: As the library is optimized, the ability to deal with ethaddr is lost. The following message would be printed on the console, Error: flags type check failure for "ethaddr" <= "80a81144M" (type: m) Error inserting "ethaddr" variable, errno=1 Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
2020-04-13Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2020-04-13ARM: socfpga: Enable DM RTC bootcount on ABB SECU1Marek Vasut
Add and enable RTC-backed boot counter on ABB SECU1 platform. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-04-08Merge tag 'u-boot-amlogic-20200406' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic into next - clk: meson-g12a: missing break - sync all Amlogic DT from Linux v5.6-rc2 - MMC clock fixups - add support for Libre Computer AML-S905D-PC and AML-S912-PC
2020-04-07Merge tag 'xilinx-for-v2020.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.07 common: - Align ENV_FAT_INTERFACE - Fix MAC address source print log - Improve based autodetection code xilinx: - Enable netconsole Microblaze: - Setup default ENV_OFFSET/ENV_SECT_SIZE Zynq: - Multiple DT updates/fixes - Use DEVICE_TREE environment variable for DTB selection - Switch to single zynq configuration - Enable NOR flash via DM - Minor SPL print removal - Enable i2c mux driver ZynqMP: - Print multiboot register - Enable cache commands in mini mtest - Multiple DT updates/fixes - Fix firmware probing when driver is not enabled - Specify 3rd backup RAM boot mode in SPL - Add SPL support for zcu102 v1.1 and zcu111 revA - Redesign debug uart enabling and psu_init delay - Enable full u-boot run from EL3 - Enable u-boot.itb generation without ATF with U-Boot in EL3 Versal: - Enable distro default - Enable others SPI flashes - Enable systems without DDR Drivers: - Gem: - Flush memory after freeing - Handle mdio bus separately - Watchdog: - Get rid of unused global data pointer - Enable window watchdog timer - Serial: - Change reinitialization logic in zynq serial driver Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-06arm64: zynqmp: Enable netconsole for ZynqMPMichal Simek
It is nice feature Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06ARM: zynq: Enable i2c mux support for all boardsMichal Simek
zc702/zc706 have pca9548 i2c muxes that's why enable the driver by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp Add support for zcu102 rev1.1Michal Simek
rev1.1 has different DDR sodimm module that's why it requires different DDR configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: versal: Enable support for Gigadevice/ISSI flashesT Karthik Reddy
Enable support for Gigadevice/ISSI flash parts for Versal platform. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06ARM: zynq: Enable DM for CFI NOR flashMichal Simek
With multi defconfig NOR flash information about NOR should be taken from DT that's why there is no reason to specify address and sizes via fixed config. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06ARM: zynq: Switch to single zynq configurationsMichal Simek
There are a lot of zynq configurations which can be merged together and use only one for all. The similar change has been done for ZynqMP by commit be1b6c32d940 ("arm64: zynqmp: Use zynqmp_virt platform") Build SPL with u-boot.img for zc706 like this. export DEVICE_TREE=zynq-zc706 && make xilinx_zynq_virt_defconfig && make -j8 u-boot.img is generic for all boards. Tested on Zybo, zc702, zc706, zc770-xm011-x16, cc108 and microzed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp: Enable cache command for mini mtest configurationMichal Simek
Enable cache commands by default for mtest configuration. It is good to be able to enable/disable caches when you test memory. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06configs: versal: Add CONFIG_DISTRO_DEFAULTS to versal defconfigT Karthik Reddy
Add DISTRO_DEFAULTS config to versal virt defconfig file which is suitable for booting general purpose Linux distributions. Remove other configs which are selected by default by DISTRO_DEFAULTS configuration. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: dts: meson: add libretech-pc supportJerome Brunet
Add support for the Amlogic based libretech-pc platform. This platform comes with 2 variant, based on the s905d or s912 SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> [narmstrong: update board/amlogic/q200/MAINTAINERS] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-03Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-tegraTom Rini
- Add support for Jetson Nano, plus miscellaneous other fixes found during Nano bringup. - Add Igor's update_uboot wrapper patches.
2020-04-02ARM: tegra: Add NVIDIA Jetson Nano Developer Kit supportTom Warren
The Jetson Nano Developer Kit is a Tegra X1-based development board. It is similar to Jetson TX1 but it is not pin compatible. It features 4GB of LPDDR4, a SPI NOR flash for early boot firmware and an SD card slot used for storage. HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0 and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI Ethernet controller provides onboard network connectivity. NVMe support has also been added. Env save is at the end of QSPI (4MB-8K). A 40-pin header on the board can be used to extend the capabilities and exposed interfaces of the Jetson Nano. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-04-02tegra: Enable CONFIG_BOOTP_PREFER_SERVERIP for all Jetson boardsTom Warren
This allows the user to set $serverip in the environment before executing a DHCP request. If they do, U-Boot will use that IP rather than using the IP in the DHCP response. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2020-04-02ARM: tegra: p2771-0000: enable PIE relocationVishruth
U-Boot is configured to build as position independent executable. Enable relocation of RELA section required to work with different load addresses. Signed-off-by: Vishruth <vishruthj@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Peter Robinson <probinson@gmail.com>
2020-04-02rockchip: Enable HDMI output on rk3399 board w/ HDMIJagan Teki
Enable config options and console setting to respective rk3399 board for HDMI output. Boards supported and tested on this patch are: - NanoPc T4 - NanoPi M4 - NanoPi Neo4 - ROC-RK3399-PC - Rock960 Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-31Merge branch 'next' of git://git.denx.de/u-boot-usb into nextTom Rini
2020-03-31Merge tag 'efi-2020-04-rc5' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc5 This series fixes: * UEFI Python tests CONFIG_OF_CONTROL=y. * int to pointer cast warning for cmd/efidebug.c * memory reservation even if fdt node is disabled Now that the Python test is fixed reintroduce the reverted patch for vexpress_ca9x4 to enable EFI_LOADER and define the dtb file name.
2020-03-31Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Fixes for Gen 2 V2H Blanche
2020-03-30Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Fixes env variable for layerscape platforms, disable hs200. - Fixes board fixup, mux setting, enable gic, fspi on lx2160a, Fixes I2C DM Warning on ls1043a, ls1046a - Fixes RGMII port on ls1046ardb, ls1046ardb and DM_USB Warning on ls1012afrdm, ls1021aiot
2020-03-30Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- SPL SPI support R40, H6 (Andre) - eMMC boot part on a64-olinuxino (Petr)
2020-03-30configs: lx2160a: Define ENV_ADDR valueKuldeep Singh
CONFIG_ENV_ADDR helps in picking environment from flash before DDR init. Define the value as 0x20500000 for lx2160ardb and lx2160aqds. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30configs: lx2160a: Enable FSPI supportKuldeep Singh
Enable FSPI controller support. So, flash environment can now be used. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30configs: disable eMMC HS200 support on layerscape platformsYangbo Lu
The eMMC HS200 speed mode on Layerscape platforms has not been supported properly. The eSDHC clock tuning has not been implemented by now. So disable it until it is supported properly in case of any potential issues. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30configs: ls1012ardb: secure boot: Add PFE configPriyanka Singh
Add config to enable the PFE and ETH support. Also change the pfe secure boot header address. Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30configs: arm: ls1021aiot: enable CONFIG_DM_USB supportRan Wang
Enable CONFIG_DM_USB to remove below compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30configs: arm64: ls1012afrdm Enable CONFIG_BLKRan Wang
With DM_USB enabled, enable CONFIG_BLK to remove this compile warning for ls1012afrdm based targets: ===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30dm: arm64: ls1046a: add i2c DM supportBiwen Li
This supports i2c DM and enables CONFIG_DM_I2C for SoC LS1046A Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30dm: arm64: ls1043a: add i2c DM supportBiwen Li
This supports i2c DM and enables CONFIG_DM_I2C for SoC LS1043A Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30configs: lx2160a: Enable GIC_V3_ITS configWasim Khan
Enable GIC_V3_ITS config to program GIC LPI configuration table. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30ARM: rmobile: Convert Gen2 Blanche to DM_SPI{,_FLASH}Marek Vasut
Enable DM_SPI and DM_SPI_FLASH in U-Boot on V2H Blanche. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-03-28configs: a64-olinuxino-emmc: add eMMC boot part config commandsPetr Štetiar
mmc bootbus and partconf commands are needed in order to be able to configure booting from separate boot0/boot1 eMMC partitions. Signed-off-by: Petr Štetiar <ynezz@true.cz> [jagan: rebase on master] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-03-28vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.Kristian Amlie
EFI was disabled in f95b8a4b5f64f because of the missing DTB file, and indeed, the DTB file is required to load recent versions of GRUB (2.04) correctly. Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
2020-03-27Revert "vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader."Tom Rini
Currently this causes failures of the platform when running the EFI loader tests, so disable it for now. This reverts commit af827140e5965e5bb2bcad1c53ca8419b428ff6d. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-03-26Merge tag 'u-boot-rockchip-20200327' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fixed for rv1108 and elgin-rv1108 board - Fix the keyboard from USB instead of CrOS EC
2020-03-26elgin-rv1108: Avoid adc_channel_single_shot errorOtavio Salvador
Currently the following error message is seen during boot: U-Boot 2020.01-08751-g55759ae141 (Mar 09 2020 - 14:44:52 -0300) Model: Elgin RV1108 R1 board DRAM: 128 MiB APLL: 600000000 DPLL:1200000000 GPLL:1188000000 ACLK_BUS: 148500000 ACLK_PERI:148500000 HCLK_PERI:148500000 PCLK_PERI:74250000 MMC: dwmmc@30110000: 0 Loading Environment from MMC... OK In: serial@10210000 Out: serial@10210000 Err: serial@10210000 Model: Elgin RV1108 R1 board rockchip_dnl_key_pressed: adc_channel_single_shot fail! .... Since the elgin-rv1108 does not use ADC to read the download key status, select CONFIG_ROCKCHIP_BOOT_MODE_REG=0 to avoid such error. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26elgin-rv1108: Use rk_board_late_init() for GPIO settingsOtavio Salvador
Since commit 8e9a8d0d0c8c ("rockchip: elgin-rv1108: use board_early_init_f for per-boar init") the function that configure the board GPIOs is no longer called since CONFIG_BOARD_EARLY_INIT_F=y is not selected. These GPIOs do not need to be configured in such early stagem, so change it to rk_board_late_init() and also select CONFIG_BOARD_LATE_INIT=y to fix the regression. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26rockchip: Change keyboard input from CrOS EC keyboard to a USB keyboardPeter Robinson
These boards aren't ChromeOS devices so won't have a cros-ec-keyb input as it's the keyboard available via the ChromeOS Embedded Controller. Update them to use a USB keyboard which would actually be available. Also enable the usb keyboard option for those devices that don't have it enabled already. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-23vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.Kristian Amlie
EFI was disabled in f95b8a4b5f64f because of the missing DTB file, and indeed, the DTB file is required to load recent versions of GRUB (2.04) correctly. Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
2020-03-18sunxi: Remove no longer needed default options from defconfigsAndre Przywara
Now that those common Allwinner config symbols are defined automatically for all boards in their Kconfig files, we can remove the now redundant definitions from the boards' _defconfig files. Some boards had a differing definiton for some of those symbols, it looks like mostly to "merge races" when the symbol was introduced (new board *_defconfig file missed the "add symbol to all files" patch). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <mripard@kernel.org> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # Amarula A64-Relic Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-03-18sunxi: Pine H64: Enable SPI booting in defconfigAndre Przywara
The Pine H64 board comes with some onboard SPI flash chip, which is perfect for loading SPL, ATF and U-Boot proper from there. Enable the functionality in the defconfig, so that we use sunxi-fel to transfer a bootable image to the NOR flash. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-03-17Merge tag 'ti-v2020.07-next' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next K3 J721E: * OSPI boot support * Support for loading remote cores in R5 SPL * PMIC ESM Support * Minor fixes for R5F and C7x remoteproc drivers K3 AM654: * Update AVS class 0 voltages. * Add I2C nodes DRA7xx/AM57xx: * Fixed Android boot on AM57xx AM33/AM43/Davinci: * switch to driver model for the net and mdio driver for baltos * Add DM/DTS support for omap video driver * Enable fastboot on am335x-evm
2020-03-16configs: Drop '$(ARCH)' usage in CONFIG_SPL_LDSCRIPTTom Rini
In a few boards we had overridden, intentionally, the value used for CONFIG_SPL_LDSCRIPT. However, rather than using the ARCH value (arm) they used the $(ARCH) variable in make. This doesn't help really, so switch to a hard-coded value. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-03-16edminiv2: Move CONFIG_SPL_LDSCRIPT to defconfigTom Rini
As there is only one machine under mach-orion5x, having a Kconfig entry for SPL_LDSCRIPT is not helpful, move this to the defconfig file. Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
generated by cgit (git 2.34.1) at 2024-12-24 13:15:28 +0000