summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2020-03-12Merge tag 'efi-2020-04-rc4-3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc4 (3) This pull request provides the hardware RNG driver for Amlogic systems needed for the EFI_RNG_PROTOCOL. Furthermore bug fixes are provided: * correct an error message in the efidebug command * correct an error in the 'efidebug rm' command * remove an unnecessary assignment in efi_queue_event()
2020-03-11drivers/rng: simplify KconfigHeinrich Schuchardt
For all sandbox systems with DM_RNG we enable RNG_SANDBOX. So we can simply set the default to yes. All rng drivers depend on DM_RNG. Use a single 'if' instead of individual dependencies. Now 'make menuconfig' shows the individual drivers neatly indented under the DM_RNG entry. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2020-03-10Merge tag 'mmc-2020-3-9' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- DM support for CAxxxx SoCs - eMMC board for presidio-asic - Add defer probe for mmc sdhci - TI SoCs mmc misc update
2020-03-10Merge tag 'u-boot-imx-20200310' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2020.04 ----------------- - DM : mx6sabresd - mx6ul_14x14_evk: fix video - mx8qxp; fix console for booting - sync DTS with kernel (imx6sx) - drop obsolete woodburn (mx35) Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/660550811
2020-03-10Merge tag 'u-boot-atmel-fixes-2020.04-a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel fixes for 2020.04 cycle: - Includes two small configuration fixes that will solve the SPL booting on sama5d3_xplained board.
2020-03-10mx6slevk: Convert to DM_ETHPedro Jardim
This fixes the following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-10mx6sabreauto: Convert to DM_ETHPedro Jardim
This fixes the following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-10mx7dsabresd: Boot in non secure by defaultFabio Estevam
Booting a mainline kernel in secure mode on i.MX7D causes only one CPU to be brought up. Change it to booting in non secure mode by default, which allows the two CPUs to be brought up. It does have a side effect of not probing the CAAM driver. If CAAM driver is needed then a secure world OS such as OPTEE needs to be used. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-03-10mx6sabresd: Convert ethernet to driver modelAlifer Moraes
Convert imx6sabresd ethernet to driver model to fix the following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-10board: sama5d3_xplained: Fix SPL DTB read from NANDFabien Lehoussel
SPL boot cannot find dtb if CONFIG_SPL_SEPARATE_BSS is disabled : CONFIG_SPL_SEPARATE_BSS=n RomBOOT <debug_uart> Missing DTB ### ERROR ### Please RESET the board ### RomBOOT CONFIG_SPL_SEPARATE_BSS=y RomBOOT <debug_uart> U-Boot SPL 2019.04-linux4sam_6.2-icp-dirty (Feb 24 2020 - 15:34:35 +0100) Trying to boot from NAND <debug_uart> Signed-off-by: Fabien Lehoussel <fabien.lehoussel@medianesysteme.com>
2020-03-09mx6sxsabresd: Enable DM_PCIFabio Estevam
Enale DM_PCI support in order to avoid board removal from the project. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-03-09configs: imxrt1050-evk: enable D/I cacheGiulio Benetti
Soc supports cache so let's enable it. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-03-09imx: remove woodburn boardStefano Babic
Board is not longer used, remove it. Signed-off-by: Stefano Babic <sbabic@denx.de>
2020-03-09imx6, aristainetos2c: add da9063 pmic setupHeiko Schocher
On the aristainetos2c boards the PMIC needs to be initialized, because the Ethernet PHY uses a different regulator that is not setup per hardware default. This does not influence the other versions as this regulator isn't used there at all. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-03-09configs: j721e_evm: Add Support for eMMC bootFaiz Abbas
Enable configs to support eMMC boot. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-09configs: am65x_evm: Add CONFIG_SUPPORT_EMMC_BOOTFaiz Abbas
With CONFIG_SUPPORT_EMMC_BOOT moved to Kconfig, move it to defconfig files. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-09board: presidio-asic: Add eMMC board supportAlex Nemirovsky
Add initial eMMC support for Cortina Access Presidio Engineering Board Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-03-04Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- ABB SECU board - Assorted minor fixes
2020-03-03ARM: socfpga: Add initial support for the ABB SECU boardHolger Brunck
Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-03-02Merge tag 'xilinx-for-v2020.04-rc4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx fixes for v2020.04-rc4 - Fix link good bit handling in dp83867 - Rename generic Zynq defconfig - Fix zybo z7 low leve setup - Fix error path in zynq_gem driver and fix 64bit usage - Fix invalid clock name quieries for Versal - Fix zynq/zynqmp SPL low level configuration via DT selection
2020-02-29Merge tag 'uniphier-v2020.04-3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier UniPhier SoC updates for v2020.04 (3rd) - Enable ADMA and HS400 for the eMMC driver on 64-bit SoCs - Add some convenient environment variables to handle SD card - Sanitize the NAND controller reset sequence and its WP handling - Sync DT with Linux
2020-02-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-28ARM: zynq: Rename defconfig to be align with ZynqMP and VersalMichal Simek
Just cosmetic change before real switch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28arm: zynq: zybo z7: fix SPL uart init bitrateMilan Obuch
The board uses 100 MHz clock for UART bitrate generator, but is configured as 50 MHz on defconfig. This produces wrong console output. The first message, "Debug uart enabled" is received as: "������b" Fix the issue by configuring the correct clock for the UART baudrate generator Signed-off-by: Milan Obuch <u-boot@dino.sk> Signed-off-by: Luis Araneda <luaraneda@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28ARM: uniphier: enable CONFIG_MMC_HS400_SUPPORT for uniphier_v8_defconfigMasahiro Yamada
The eMMC controller on LD20 or later supports HS-400 mode. It works on a quick test. Enable it in case somebody may want to use it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: enable CONFIG_MMC_SDHCI_ADMA for uniphier_v8_defconfigMasahiro Yamada
Switch over to ADMA from SDMA. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-26defconfig: k2x_hs: Remove DTB_RESELECT to fix DHCP issueMadan Srinivas
This fixes the inadvertent definition of CONFIG_DTB_RESELECT and CONFIG_MULTI_DTB_FIT in the K2x HS defconfigs, that happened as part of a resync of the defconfigs. The inclusion of these config options causes ethernet to stop working on K2x HS devices as they interfere with the installation of the secure boot monitor. This patch also removes the above configs for the K2 GP devices, as they are not needed, and to keep the differences between the GP and HS defconfigs to a minimum. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com>
2020-02-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
- Update Sata node for T2080QDS and revert SATA related unrequired patches.
2020-02-25board: novtech: meerkat96: use correct mmc driverCarl Gelfand
When the board was originally submitted, it was attempting to use the ESDHC driver. The board uses the USDHC driver. Signed-off-by: Carl Gelfand <carl@novtech.com> Cc: Shawn Guo <shawn.guo@kernel.org> (maintainer:MEERKAT96 BOARD) Acked-by: Shawn Guo <shawnguo@kernel.org>
2020-02-25Revert "configs: enable sata device module in T2080QDS"Peng Ma
This reverts commit 02dc1599ba0b16eb21ba0c206e5b6f38fe7b67a7 Commit 02dc1599ba0b ("configs: enable sata, eSDHC, USB device module in T2080QDS") has some sata defconfig changes to fit support DM mode, Now the driver will be reverted, So revert it. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-20rockchip: rk3399: add target type for evb based boardKever Yang
There are many boards share the board file and device header file with rk3399 evb, add target type MACRO so that it is fixed instead of default to the first target in "RK3399 board select". Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19configs: fix typos in khadas-edge defconfigsJared Baldridge
s/dtbi/dtb/ Signed-off-by: Jared Baldridge <jrb@expunge.us>
2020-02-19board: roc-pc-rk3399: Add support for onboard LED's and push button to ↵Suniel Mahesh
indicate power mode Added support for onboard LED's and push button. When powered board will be in low power mode(yellow LED), on button press, board enters full power mode (red LED) and boots u-boot. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: rk3399: split roc-pc-rk3399 out of evb_rk3399Suniel Mahesh
roc-pc-rk3399 board has one user button & three user LED's. Currently we don't have any code support for these devices. Since button and LED's are specific to roc-pc-rk3399 board, split it into its own board file and add code support here. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rk3288: tinker: Enable HDMI outputJagan Teki
Enable HDMI output for Tinker RK3288 board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-14Merge tag 'u-boot-stm32-20200214' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - add DH Electronics DHCOM SoM and PDK2 board - DT alignment with kernel v5.5-rc7 for stm32mp1 boards - fix STM32 image format for big endian hosts in mkimage - solve warnings in device tree and code for stm32mp1 boards - remove fdt_high and initrd_high for stm32 and stih boards - add support of STM32MP15x Rev.Z - update stm32mp1 readme
2020-02-13configs: am43xx_evm_usbhost_boot: Add device for environmentFaiz Abbas
Add mmc device partition 0 as the seat of the environment. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-13configs: am43xx_evm_usbhost: Add configs for USB Host boot modeFaiz Abbas
Enable configs to fix USB Host boot mode. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-13configs: j721e_evm_r5: Enable early consLokesh Vutla
Early cons will be used in uart boot. Enable the same for j721e_r5 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-13configs: am43xx_evm: Enable SPL_ETH_SUPPORTFaiz Abbas
Enable CONFIG_SPL_ETH_SUPPORT to fix ethernet boot support. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-12ARM: dts: stm32: Add DH Electronics DHCOM SoM and PDK2 boardMarek Vasut
Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier board. This is an SoM with STM32MP15xx and an evaluation kit. The baseboard provides Ethernet, UART, USB, CAN and optional display. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-02-12ARC: rework setting of ARC CPU specific compiler optionsEugeniy Paltsev
It's a very rare if at all existing occasion when ARC CPU template is used as is w/o any changes - in the end it's a beauty and competitive advantage of ARC cores to be tailored for a particular use-case - and so it doesn't make a lot of sense to offer template-based "-mcpu" selection. Given for each and every platform we end-up adding quite a few more flags it's logical to move "-mcpu" selection to platform's definition as well which we exactly do here. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-02-12ARC: nsim_hs38: Add support of Virtio NET & BLKAlexey Brodkin
Given now nsim_hs38 configuration is usable on QEMU and in QEMU we have Virtio working perfectly fine the next logical step is to add support of supported & known to work net & bkl to this config. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-02-12ARC: nsim_{700|700be|hs38be}_defconfigs: Disable networkingAlexey Brodkin
We don't have yet any brc700 or big-enadian platforms with networking support to run this particular configuration. Whenever QEMU for ARC supports arc700 or big-endian targets we may revisit this one. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-02-12ARC: nSIM: switch from ARC UART to DW UARTAlexey Brodkin
Since v2019.06 DesingWare nSIM supports DesignWare UART simulation and so we may switch from pretty unusual ARC UART to much more standard DesignWare UART (which in case of U-Boot is just an ordinary 16650 UART). This among other things makes built dinaries compatible with our other platforms to name a few: FPGA-based HAPS boards, QEMU and even ZeBU. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-02-10Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Move P2SB from Apollo Lake to a more generic location - Add a function to find a device by drvdata in DM core - Enhancement of DM IRQ uclass driver - Add a clock driver for Intel devices - Add support for ACPI general-purpose events - Add a TPM driver for H1/Cr50 - Enable TPM on Google Chromebook Coral
2020-02-09board: ge: mx53ppd: use DM for uartIan Ray
Drop PPD_UART_PAD_CTRL since it matches defaults. Enable DM serial and MXC uart. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09board: ge: bx50v3: use DM for uartRobert Beckett
Remove legacy uart pad and iomux code Enable DM serial and mxc uart Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09board: ge: mx53ppd: Use DM for ethernetRobert Beckett
Remove legacy iomux setup for fec. Enable phylib and DM fec. Use Kconfig for enabling fec. Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09board: ge: bx50v3: Enable DM PWM for backlightRobert Beckett
Add backlight and panel devicetree definitions Use UCLASS_PANEL to enable backlight via display enable handler Remove old explicit gpio code for handling backlight Use cls command to initiate display in HW agnostic manner Enable DM regulator and pwm Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
generated by cgit (git 2.34.1) at 2024-12-27 01:14:02 +0000