summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2020-06-07rockchip: Enable PCIe and NVMe on ROCKPro64Mark Kettenis
Enable CONFIG_PCI and CONFIG_NVME and related configs for the ROCKPro64 board. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399Mark Kettenis
Enable CONFIG_PCI and CONFIG_NVME and related configs for the Firefly RK3399 board. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-04configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-04Convert CONFIG_BOARD_LATE_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_LATE_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-04Convert CONFIG_CMD_ASKENV et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CMD_ASKENV CONFIG_CMD_BMP CONFIG_CMD_BOOTD CONFIG_CMD_CACHE CONFIG_CMD_CRC32 CONFIG_CMD_DHCP CONFIG_CMD_ENV CONFIG_CMD_EXPORTENV CONFIG_CMD_EXT2 CONFIG_CMD_EXT4 CONFIG_CMD_FLASH CONFIG_CMD_FS_GENERIC CONFIG_CMD_FUSE CONFIG_CMD_GPIO CONFIG_CMD_GPT CONFIG_CMD_GREPENV CONFIG_CMD_I2C CONFIG_CMD_IMLS CONFIG_CMD_IMPORTENV CONFIG_CMD_LOADB CONFIG_CMD_LOADS CONFIG_CMD_MEMINFO CONFIG_CMD_MII CONFIG_CMD_MTDPARTS CONFIG_CMD_NAND CONFIG_CMD_NAND_TRIMFFS CONFIG_CMD_NFS CONFIG_CMD_PCA953X CONFIG_CMD_PCA953X_INFO CONFIG_CMD_PCI CONFIG_CMD_PING CONFIG_CMD_READ CONFIG_CMD_SF CONFIG_CMD_SPI CONFIG_CMD_SPL CONFIG_CMD_SPL_WRITE_SIZE CONFIG_CMD_TIME CONFIG_CMD_TRACE CONFIG_CMD_UBI CONFIG_CMD_UBIFS CONFIG_CMD_UNZIP CONFIG_FS_EXT4 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-04Convert CONFIG_BZIP2 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BZIP2 CONFIG_GZIP CONFIG_LZO CONFIG_ZLIB CONFIG_LZMA CONFIG_LZO Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-04topic_miami: Disable GPIOTom Rini
Per the boards config header file, there is no useful GPIO on these boards. Remove CONFIG_CMD_GPIO from the defconfigs. Cc: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-04ARM: rmobile: blanche: Disable CONFIG_CMD_SF / CONFIG_CMD_SPITom Rini
The config header for this platform disables both CMD_SF and CMD_SPI and the defconfig leaves them enabled. Disable them from the defconfig and enable them in the header. Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masakazu Mochizuki <masakazu.mochizuki.wd@hitachi.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-04bcmstb: Migrate CONFIG_CMD_EXT[24]Tom Rini
The common config header for bcm7260 and bcm7445 enable CONFIG_CMD_EXT2/EXT4 but the defconfigs do not. This results in the commands being disabled. Enable them via the defconfig. Cc: Thomas Fitzsimmons <fitzsim@fitzsim.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-04mx6memcal: Finish migration to defconfig optionsTom Rini
The config header for this platform uses '#undef' in a number of cases. All of the MMC related ones were already handled correctly in the defconfig file. In the case of CONFIG_CMD_FUSE, the command was being built and enabled via defconfig. Disable it in the defconfig, cleanup the header. Reviewed-by: Eric Nelson <eric@nelint.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-04pfla02: Rework excluding NAND from SPLTom Rini
Rather than only enable CONFIG_CMD_NAND for non-SPL builds, move the CMD options to defconfig and rework the guards to not try and call the function in SPL builds. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
2020-06-04serial: Convert ARM_DCC to KconfigTom Rini
The symbol "CONFIG_ARM_DCC" is used to control building drivers/serial/arm_dcc.c. Provide a simple Kconfig entry for this. Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Tom McLeod <tom.mcleod@opalkelly.com> Cc: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2020-06-04configs: enable DM_ETH support for T1024RDBMadalin Bucur
Enable DM_ETH on all the defconfigs for the T1024RDB board. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04configs: enable DM_ETH support for P2041RDBMadalin Bucur
Enable DM_ETH on all the defconfigs for the P2041RDB board. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04configs: fu540: Add config options for U-Boot SPLPragnesh Patel
With sifive_fu540_defconfig: User can use FSBL or u-boot-spl.bin anyone at a time. For FSBL, fsbl->fw_payload.bin (opensbi + U-Boot) For u-boot-spl.bin, u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb) U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT image u-boot.itb from SD card into RAM. U-Boot SPL expects u-boot.itb FIT image at the starting of SD card sector number (0x822) of GUID type "2E54B353-1271-4842-806F-E436D6AF6985" Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-03Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- H6 emac support - USB PHY H6 logic alignment
2020-06-01sunxi: H6: Enable Ethernet on the Pine H64Samuel Holland
Now that the EMAC driver supports the H6 SoC, we can enable the Ethernet hardware on the Pine H64 board. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-01Merge tag 'rpi-next-2020.07.2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi rpi4: - set ARCH_FIXUP_FDT_MEMORY - bump NR_DRAM_BANKS to four to enable 8 GB of RAM
2020-06-01Merge tag 'u-boot-stm32-20200528' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - stm32mp15: fix DT on DHCOR SOM and avenger96 board - stm32mp15: re-enable KS8851 on DHCOM
2020-05-31Merge tag 'u-boot-rockchip-20200531' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix mmc of path after syncfrom kernel dts; - Add dwc3 host support with DM for rk3399; - Add usb2phy and typec phy for rockchip platform; - Migrate board list doc to rockchip.rst; - Add rk3399 Pinebook Pro board support; - Update dram_init in board_init and add memory node in SPL;
2020-05-31rockchip: Add initial support for the Pinebook Pro laptop from Pine64.Peter Robinson
Specification: - Rockchip RK3399 - 4GB Dual-Channel LPDDR4 - eMMC socket - mSD card slot - 128Mbit (16Mb) SPI Flash - AP6256 for 11AC WiFi + BT5 - 14 inch 1920*1080 eDP MiPi display - Camera - USB 3.0, 2.0 ports - Type-C port with alt-mode display (DP 1.2) and 15W charge - DC 5V/3A - optional PCIe slot for NVMe SSD drive Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Tested-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-30Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- r2dplus fixes
2020-05-30configs: rpi: set NR_DRAM_BANKS to fourMatthias Brugger
With the new RPi4 which has 8 GB of RAM, we can have up to four DRAM banks. Bump up the configuration files to detect all the memory in U-Boot. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-30rpi_4_defconfig: add missing CONFIG_ARCH_FIXUP_FDT_MEMORYCorentin Labbe
As discussed at https://lore.kernel.org/linux-arm-kernel/b726290c-1038-3771-5187-6ac370bc92c9@arm.com/T/ the defconfig for rpi4 miss CONFIG_ARCH_FIXUP_FDT_MEMORY. Without it, booting with an initrd fail. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-29sandbox: drop CONFIG_SYS_RELOC_GD_ENV_ADDRAKASHI Takahiro
As we discussed in [1], this option is not needed for sandbox build. [1] https://lists.denx.de/pipermail/u-boot/2020-February/400182.html Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-30rockchip: rockpro64: enable DM_KEYBOARDMarcin Juszkiewicz
USB stack uses DM so DM_KEYBOARD is needed to get USB keyboard working. Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-30roc-rk3399-pc: Enable USB3.0 HostJagan Teki
Enable USB3.0 Host support for ROC-RK3399-PC boards. Tested USB3.0 SSD on Type C1 port on board. => usb start starting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found scanning bus dwc3 for devices... 6 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) USB 2.0 Hub [MTT] 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Hub (480 Mb/s, 0mA) | | VIA Labs, Inc. USB2.0 Hub | | | +-4 Hub (480 Mb/s, 100mA) | | USB 2.0 Hub | | | +-5 (480 Mb/s, 100mA) | VIA Technologies Inc. USB 2.0 BILLBOARD 0000000000000001 | +-3 Hub (5 Gb/s, 0mA) | VIA Labs, Inc. USB3.0 Hub | +-6 Mass Storage (5 Gb/s, 224mA) JMicron External Disk 3.0 DB12345678A2 => usb reset resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found scanning bus dwc3 for devices... 6 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-30configs: evb-rk3399: update support usb3.0 hostFrank Wang
Update evb-rk3399 default config to support USB3.0 Host. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29sh: r2dplus: Enable HUSHMarek Vasut
Enable richer HUSH shell to make working with the board more pleasant. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-05-29rockchip: enable USB OHCI host for RockPro64Marcin Juszkiewicz
U-Boot has video output enabled so time to get keyboard working. => usb reset;usb tree resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3a0000: USB OHCI 1.0 Bus usb@fe3c0000: USB EHCI 1.00 Bus usb@fe3e0000: USB OHCI 1.0 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found scanning bus usb@fe3e0000 for devices... 3 USB Device(s) found scanning bus dwc3 for devices... cannot reset port 1!? 2 USB Device(s) found scanning usb for storage devices... 2 Storage Device(s) found USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (12 Mb/s, 0mA) U-Boot Root Hub 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (12 Mb/s, 0mA) | U-Boot Root Hub | +-2 Hub (12 Mb/s, 100mA) | ALCOR Generic USB Hub | +-3 Mass Storage (12 Mb/s, 200mA) Kingston DT 101 G2 001478544887BB3157380157 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Mass Storage (5 Gb/s, 76mA) ADATA ADATA USB Flash Drive 1520405012240002 Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29nanopc-t4: Enable USB GadgetJagan Teki
Enable DWC3 core, gadget for nanopc-t4 board. This would help to use fastboot by default. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29configs: khadas-vim3: enable HDMI outputNeil Armstrong
Enable options to permit HDMI output on Khadas VIM3 & VIM3L boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-05-28ARM: stm32: Hog GPIO PF7 high on DHCOR to unlock SPI NOR nWPMarek Vasut
The SPI NOR nWP line is connected to GPIO PF7 on the SoM, pull the GPIO line high by default to clear SPI NOR WP. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-28ARM: stm32: Re-enable KS8851 on DHCOMMarek Vasut
Since the KS8851 driver is now in, enable the Kconfig entry on DHCOM to make the second ethernet available. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-27arm: mvebu: Convert CRS305-1G-4S board to CRS3xx-98DX3236Luka Kovacic
Convert the CRS305-1G-4S board to CRS3xx-98DX3236 to enable easier implementation of new CRS3xx series boards, based on Marvell Prestera 98DX3236. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr>
2020-05-26configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-25Merge tag 'ti-v2020.07-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Enable DM_ETH on omap3_logic board - Enable Caches in SPL for K3 platforms - Enable backup boot mode support for J721E - Update the DDR timings for AM654 EVM - Add automated tests for RX-51
2020-05-25Convert CONFIG_CMD_MMC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CMD_MMC Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-22Merge branch 'net' of git://git.denx.de/u-boot-socfpgaTom Rini
- ks8851 cleanups and DM migration
2020-05-22net: ks8851: Add Kconfig entriesMarek Vasut
Convert CONFIG_KS8851_MLL and CONFIG_KS8851_MLL_BASEADDR to Kconfig Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22Merge tag 'u-boot-rockchip-20200522' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix rk3288 chromebook veyron support; - Add pcie driver support for rk3399; - other fixes for rk3399 boards
2020-05-22rockchip: rk3328: rock64 - fix gen3 SPL hangKurt Miller
Use the same approach as ROC-RK3328-CC which enables SPL GPIO, pinctl and regulator support. This allows the gen3 board to boot through SPL and does not break gen2 in the process. Signed-off-by: Kurt Miller <kurt@intricatesoftware.com> Acked-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22defconfig: veyron: no need for CONFIG_SPL_PINCTRL_FULLUrja Rannikko
Veyrons do not need full pinctrl support for SPL. The full pinctrl support does nothing when enabled with OF_PLATDATA, thus was already unused. This frees about 4kB of SPL size. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22rockchip: veyron: move board_early_init_f to _r (after reloc)Urja Rannikko
Previously veyron_init() was called in board_init() context, which is called after relocation. Moving it to veyron.c used board_early_init_f which is called way earlier, and causes veyron_init to hang. Using board_early_init_r instead fixes this. Fixes: b678f2790c ("rockchip: rk3288: Move veyron_init() back to veyron.c") Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22rockchip: Enable PCIe/M.2 on rock960 boardJagan Teki
Due to board limitation some SSD's would work on rock960 PCIe M.2 only with 1.8V IO domain. So, this patch enables grf io_sel explicitly to make PCIe/M.2 to work. Cc: Tom Cubie <tom@radxa.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22rockchip: Enable PCIe/M.2 on rk3399 board w/ M.2Jagan Teki
Enable PCIe/M.2 support on - NanoPC-T4 - ROC-RK3399-PC Mezzanine boards. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> #roc-rk3399-pc Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22rockpro64: Enable HDMI output on rockpro64 boardAndrius Štikonas
Reference to commit that adds HDMI to other rk3399 boards: commit 9778edae5576 ("rockchip: Enable HDMI output on rk3399 board w/ HDMI") Signed-off-by: Andrius Štikonas <andrius@stikonas.eu> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Kever Yang <kever.yang@rock-chips.com> Tested-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22ARM: uniphier: select DM_ETHMasahiro Yamada
drivers/net/smc911x.c has been converted to DM. select DM_ETH to enable it for all the UniPhier platform boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-21Merge git://git.denx.de/u-boot-shTom Rini
- Enable -ffunction-sections / -fdata-sections --gc-sections to SH - RCar Gen3 updates
2020-05-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds - QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based platforms - Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
generated by cgit (git 2.34.1) at 2024-12-27 11:48:24 +0000