summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)Author
2017-12-12dm: blk: Use uclass_find_first/next_device() in blk_first/next_device()Stefan Roese
This patch changes the calls to uclass_first/next_device() in blk_first/ next_device() to use uclass_find_first/next_device() instead. These functions don't prepare the devices, which is correct in this case. With this patch applied, the "usb storage" command now works again as expected: => usb storage Device 0: Vendor: SanDisk Rev: 1.00 Prod: Ultra Type: Removable Hard Disk Capacity: 58656.0 MB = 57.2 GB (120127488 x 512) Without this patch, it used to generate this buggy output: => usb storage Card did not respond to voltage select! mmc_init: -95, time 26 No storage devices, perhaps not 'usb start'ed..? Signed-off-by: Stefan Roese <sr@denx.de> Suggested-by: Simon Glass <sjg@chromium.org> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15blk: Remove various places that do flush cache after readBin Meng
All these places seem to inherit the codes from the MMC driver where a FIXME was put in the comment. However the correct operation after read should be cache invalidate, not flush. The underlying drivers should be responsible for the cache operation. Remove these codes completely. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: York Sun <york.sun@nxp.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: York Sun <york.sun@nxp.com>
2017-09-11blk: dm: make blk_create_device() take a number of block instead of a sizeJean-Jacques Hiblot
There is an overflow problem when taking the size instead of the number of blocks in blk_create_device(). This results in a wrong device size: the device apparent size is its real size modulo 4GB. Using the number of blocks instead of the device size fixes the problem and is more coherent with the internals of the block layer. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-10block: ide: Don't bother to create BLK device if no CDROM insertedBin Meng
When there is no CDROM inserted, the block size is zero hence there is no need to create a BLK device for it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-10block: ide: Fix block read/write with driver modelBin Meng
This converts the IDE driver to driver model so that block read and write are fully functional. Fixes: b7c6baef ("x86: Convert MMC to driver model") Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-09-03block: Drop the ftide020 driverBin Meng
This is not used in U-Boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-03block: ide: Drop CONFIG_IDE_LEDBin Meng
This is actually not used. Drop it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-03block: ide: Drop CONFIG_IDE_INIT_POSTRESETBin Meng
This is not referenced anywhere. Drop it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-17dm: blk: Update return value in blk_create_devicef()Simon Glass
This returns 'ret' but the value is always zero. Update it to simply return 0, for clarity. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-17dm: blk: Add a function to find an interface-type nameSimon Glass
Add a function to find the name of an interface type (e.g. "sata", "scsi") from the interface type enum. This is useful for generic code (not specific to SATA or SCSI, for example) that wants to display the type of interface it is dealing with. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-13dm: blk: part: Add UCLASS_NVME and IF_TYPE_NVMEZhikang Zhang
This adds a new uclass id and block interface type for NVMe. Signed-off-by: Zhikang Zhang <zhikang.zhang@nxp.com> Signed-off-by: Wenbin Song <wenbin.song@nxp.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Jon Nettleton <jon@solid-run.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-01Merge git://git.denx.de/u-boot-x86Tom Rini
2017-08-01block: ide: Fix build error when CONFIG_BLK is onBin Meng
Add missing #ifndef CONFIG_BLK to wrap dev_desc->block_read. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01dm: mmc: Allow disabling driver model in SPLSimon Glass
At present if U-Boot proper uses driver model for MMC, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers. Add new SPL versions of the options for DM_MMC, DM_MMC_OPS and BLK. By default these follow their non-SPL versions, but this can be changed by boards which need it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-11scsi: Move drivers into new drivers/scsi directorySimon Glass
At present we have the SCSI drivers in the drivers/block and common/ directories. It is better to split them out into their own place. Use drivers/scsi which is what Linux does. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11sata: Move drivers into new drivers/ata directorySimon Glass
At present we have the SATA and PATA drivers mixed up in the drivers/block directory. It is better to split them out into their own place. Use drivers/ata which is what Linux does. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11Kconfig: Add CONFIG_SATA to enable SATASimon Glass
At present CONFIG_CMD_SATA enables the 'sata' command which also brings in SATA support. Some boards may wish to enable SATA without the command. Add a separate CONFIG to permit this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11scsi: Drop scsi_print_error()Simon Glass
This function is only defined by one driver and is empty. Move it into the SCSI implementation itself. We could remove it, but it should be useful for debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11scsi: Drop sym53c8xx driverSimon Glass
This driver is for a PowerPC board that will likely be removed soon. Rather than converting it to driver model, drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11Convert CONFIG_SCSI to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SCSI Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-03drivers, block: remove sil680 driverHeiko Schocher
driver is not used anymore, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-20block: sata: ceva: drop extraneous netdev.h includePeter Robinson
Drop include of netdev.h as it's a SATA driver not a network driver. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-12powerpc, 8xx: remove support for 8xxHeiko Schocher
There was for long time no activity in the 8xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8xx, so remove it (with a heavy heart, knowing that I remove here the root of U-Boot). Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-09dm: blk: Add a way to obtain a block device from its parentSimon Glass
Many devices support a child block device (e.g. MMC, USB). Add a convenient way to get this device given the parent device. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-01dm: blk: Improve block device claimingSimon Glass
The intention with block devices is that the device number (devnum field in its descriptor) matches the alias of its parent device. For example, with: aliases { mmc0 = "/sdhci@700b0600"; mmc1 = "/sdhci@700b0400"; } we expect that the block devices for mmc0 and mmc1 would have device numbers of 0 and 1 respectively. Unfortunately this does not currently always happen. If there is another MMC device earlier in the driver model data structures its block device will be created first. It will therefore get device number 0 and mmc0 will therefore miss out. In this case the MMC device will have sequence number 0 but its block device will not. To avoid this, allow a device to request a device number and bump any existing device number that is using it. This all happens during the binding phase so it is safe to change these numbers around. This allows device numbers to match the aliases in all circumstances. Add a test to verify the behaviour. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: blk: Add a function to find the next block device numberSimon Glass
At present this code is inline. Move it into a function to allow it to be used elsewhere. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: blk: Allow finding block devices without probingSimon Glass
Sometimes it is useful to be able to find a block device without also probing it. Add a function for this as well as the associated test. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: core: Replace of_offset with accessor (part 2)Simon Glass
At present devices use a simple integer offset to record the device tree node associated with the device. In preparation for supporting a live device tree, which uses a node pointer instead, refactor existing code to access this field through an inline function. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: Rename dev_addr..() functionsSimon Glass
These support the flat device tree. We want to use the dev_read_..() prefix for functions that support both flat tree and live tree. So rename the existing functions to avoid confusion. In the end we will have: 1. dev_read_addr...() - works on devices, supports flat/live tree 2. devfdt_get_addr...() - current functions, flat tree only 3. of_get_address() etc. - new functions, live tree only All drivers will be written to use 1. That function will in turn call either 2 or 3 depending on whether the flat or live tree is in use. Note this involves changing some dead code - the imx_lpi2c.c file. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-22Kconfig: Add a CONFIG_IDE optionSimon Glass
At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate CONFIG_IDE option so that IDE support can be enabled without requiring the 'ide' command. Update existing users and move the ide driver into drivers/block since it should not be in common/. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-09drivers: block: dwc_ahci: Implement a driver for Synopsys DWC sata deviceJean-Jacques Hiblot
Implement a sata driver for Synopsys DWC sata device based on U-boot driver model. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-18fsl/sata: correctly identify failed mallocxypron.glpk@gmx.de
After allocating sata->cmd_hdr_tbl_offset we have to check this variable and not variable sata. The problem was indicated by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-04-18drivers: remove Blackfin specific driversMasahiro Yamada
These drivers have no user since commit ea3310e8aafa ("Blackfin: Remove"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-04-04dm: core: Add flags parameter to device_remove()Stefan Roese
This patch adds the flags parameter to device_remove() and changes all calls to this function to provide the default value of DM_REMOVE_NORMAL for "normal" device removal. This is in preparation for the driver specific pre-OS (e.g. DMA cancelling) remove support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2016-12-20block: Move ceva driver to DMMichal Simek
This patch also includes ARM64 zynqmp changes: - Remove platform non DM initialization - Remove hardcoded sata base address Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-20dm: Add support for scsi/sata based devicesMichal Simek
All sata based drivers are bind and corresponding block device is created. Based on this find_scsi_device() is able to get back block device based on scsi_curr_dev pointer. intr_scsi() is commented now but it can be replaced by calling find_scsi_device() and scsi_scan(). scsi_dev_desc[] is commented out but common/scsi.c heavily depends on it. That's why CONFIG_SYS_SCSI_MAX_DEVICE is hardcoded to 1 and symbol is reassigned to a block description allocated by uclass. There is only one block description by device now but it doesn't need to be correct when more devices are present. scsi_bind() ensures corresponding block device creation. uclass post_probe (scsi_post_probe()) is doing low level init. SCSI/SATA DM based drivers requires to have 64bit base address as the first entry in platform data structure to setup mmio_base. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-09Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze"Tom Rini
This reverts commit 3edc0c252257e4afed163a3a74aba24a5509b198, reversing changes made to bb135a0180c31fbd7456021fb9700b49bba7f533.
2016-12-08block: Move ceva driver to DMMichal Simek
This patch also includes ARM64 zynqmp changes: - Remove platform non DM initialization - Remove hardcoded sata base address Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Series-to: sjg, agraf@suse.de Series-cc: uboot Series-version: 4 Series-changes: 2 - make ceva_init_sata static - Move SATA_CEVA to defconfig - Initalized max_lun and max_id platdata Series-changes: 3 - Extend Kconfig help description - sort dm.h - Remove SPL undefinition from board file - Fix Kconfig dependecies
2016-12-08dm: Add support for scsi/sata based devicesMichal Simek
All sata based drivers are bind and corresponding block device is created. Based on this find_scsi_device() is able to get back block device based on scsi_curr_dev pointer. intr_scsi() is commented now but it can be replaced by calling find_scsi_device() and scsi_scan(). scsi_dev_desc[] is commented out but common/scsi.c heavily depends on it. That's why CONFIG_SYS_SCSI_MAX_DEVICE is hardcoded to 1 and symbol is reassigned to a block description allocated by uclass. There is only one block description by device now but it doesn't need to be correct when more devices are present. scsi_bind() ensures corresponding block device creation. uclass post_probe (scsi_post_probe()) is doing low level init. SCSI/SATA DM based drivers requires to have 64bit base address as the first entry in platform data structure to setup mmio_base. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Series-changes: 2 - Use CONFIG_DM_SCSI instead of mix of DM_SCSI and DM_SATA Ceva sata has never used sata commands that's why keep it in SCSI part only. - Separate scsi_scan() for DM_SCSI and do not change cmd/scsi.c - Extend platdata Series-changes: 3 - Fix scsi_scan return path - Fix header location uclass-internal.h - Add scsi_max_devs under !DM_SCSI - Add new header device-internal because of device_probe() - Redesign block device creation algorithm - Use device_unbind in error path - Create block device with id and lun numbers (lun was there in v2) - Cleanup dev_num initialization in block device description with fixing parameters in blk_create_devicef - Create new Kconfig menu for SATA/SCSI drivers - Extend description for DM_SCSI - Fix Kconfig dependencies - Fix kernel doc format in scsi_platdata - Fix ahci_init_one - vendor variable Series-changes: 4 - Fix Kconfig entry - Remove SPL ifdef around SCSI uclass - Clean ahci_print_info() ifdef logic
2016-12-05sata: sata_mv: Fix misaligned cache warningsStefan Roese
This patch fixes the warnings about misaligned cache on Armada XP: CACHE: Misaligned operation at range [7facb400, 7facb460] Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-02dm: blk: Fix get_desc to return block device descriptorMichal Simek
Current get_desc() implementation is not able to succesfully finish and return pointer to block device descriptor. Also function always return non zero value even device is found. The patch fills block device descriptor and return 0 if device is found. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11dm: blk: Enable CONFIG_BLK if DM_MMC is enabledSimon Glass
To speed up conversion to CONFIG_BLK, enable it by default when DM_MMC is enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-27ahci: Make ahci_port_base() non-static to enable overwriteStefan Roese
To allow a board- / platform-specific ahci_port_base() function, this patch removes "static inline" and adds __weak to this function. This will be used by the upcoming Armada 7K/8K SATA / AHCI support, which unfortunately needs a different port base address calculation. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
2016-09-23treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23drivers: squash lines for immediate returnMasahiro Yamada
Remove unneeded variables and assignments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-24block: dwc_ahsata: support i.MX6DQPlusPeng Fan
i.MX6DQPlus support sata interface, so not return failure when CPU is i.MX6DQPlus. In this patch, also use simpler runtime cpu dections macros to replace is_cpu_type. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Tang Yuantian <Yuantian.Tang@freescale.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Bin Meng <bmeng.cn@gmail.com>
2016-05-17dm: blk: Add functions to select a hardware partitionSimon Glass
The block device uclass does not currently support selecting a particular hardware partition but this is needed for MMC. Add it so that the blk API can support MMC properly. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: blk: Free the block device name when unboundSimon Glass
Mark the device name as allocated so that it will be freed correctly when the device is unbound. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: blk: Fix allocation of block-device numberingSimon Glass
Due to code ordering the block devices are not numbered sequentially. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17dm: systemace: Add driver-mode block-device supportSimon Glass
Add support for CONFIG_BLK to the systemace driver. Signed-off-by: Simon Glass <sjg@chromium.org>