summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2019-02-25clk: rmobile: Drop def_bool per SoCMarek Vasut
Drop per SoC def_bool on each driver, since this is now implied by SoC Kconfig option instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-02-09clk: stm32mp1: correctly handle Clock Spreading GeneratorPatrick Delaunay
To activate the csg option, the driver need to set the bit2 of PLLNCR register = SSCG_CTRL: Spread Spectrum Clock Generator of PLLn enable. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-09clk: stm32mp1: add debug informationPatrick Delaunay
Add support of clk dump command and display information during probe (under CONFIG_DISPLAY_CPUINFO). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-09clk: stm32mp1: recalculate counter when switching freqPatrick Delaunay
Because stgen is initialized with HSI clock, we need to recalculate the counter when changing frequency. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-09clk: stm32mp1: correct access to RCC_OCENSETR/RCC_OCENCLRRPatrick Delaunay
Remove unnecessary setbits on set/clear registers. Avoid to deactivate HSI with HSE. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-09clk: stm32mp1: add IPCC clockPatrick Delaunay
Add support for enable/disable of IPCC clock using AHB3 registers Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-09clk: stm32mp1: no more get ck_usbo_48m in device treePatrick Delaunay
Remove support of ck_usbo_48m clock node in device tree, but force 48MHz frequency to prepare alignment with kernel device tree. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-01rockchip: clk: Add mention of four new clocksSimon Glass
These clocks are needed to get MMC running. We don't actually support setting them yet. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01clk: Improve debug message in clk_set_default_rates()Simon Glass
It is helpful to print the clock number as well as the index, so that this can be looked up in the binding file. Update the debug() statement to do this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01rockchip: rk3288: Add i2s pinctrl and clock supportSimon Glass
Add support for setting pinctrl and clock for I2S on rk3288. This allows the sound driver to operate. These settings were created by rkmux.py Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-30sunxi: clk: enable clk and reset for CCU devicesAndre Przywara
Some Allwinner clock devices have parent clocks and reset gates itself, which need to be activated for them to work. Add some code to just assert all resets and enable all clocks given. This should enable the A80 MMC config clock, which requires both to be activated. The full CCU devices typically don't require resets, and have just fixed clocks as their parents. Since we treat both as optional and enabling fixed clocks is a NOP, this works for all cases, without the need to differentiate between those clock types. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jagan Teki <jagan@openedev.com>
2019-01-29sunxi: clk: A80: add MMC clock supportAndre Przywara
The A80 handles resets and clock gates for the MMC devices differently, outside of the CCU IP block. Consequently we have a separate clock device with a separate binding for that. Implement that with the respective clock gates and resets to allow the A80 taking part in the DM_MMC game. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [jagan: fix a80 mmc clock config compatible] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-01-29sunxi: clk: add MMC gates/resetsAndre Przywara
Add the MMC clock gates and reset bits for all the Allwinner SoCs. This allows them to be used by the MMC driver. We don't advertise the mod clock yet, as this is still handled by the MMC driver. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [jagan: add V3S, A80 gates/resets] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-01-18clk: sunxi: Add Allwinner A80 CLK driverJagan Teki
Add initial clock driver for Allwinner A80. - Implement UART bus clocks via ccu_clk_gate table for A80, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement UART bus resets via ccu_reset table for A80, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-18clk: sunxi: Add Allwinner H6 CLK driverJagan Teki
Add initial clock driver for Allwinner H6. - Implement UART bus clocks via ccu_clk_gate table for H6, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement UART bus resets via ccu_reset table for H6, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-01-18clk: sunxi: Implement UART resetsJagan Teki
Implement UART resets for all relevant Allwinner SoC clock drivers via ccu reset table. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-01-18clk: sunxi: Implement UART clocksJagan Teki
Implement UART clocks for all Allwinner SoC clock drivers via ccu clock gate table. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-01-18clk: sunxi: Add Allwinner V3S CLK driverJagan Teki
Add initial clock driver for Allwinner V3S. - Implement USB bus and USB clocks via ccu_clk_gate table for V3S, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement USB bus and USB resets via ccu_reset table for V3S, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18clk: sunxi: Add Allwinner R40 CLK driverJagan Teki
Add initial clock driver for Allwinner R40. - Implement USB bus and USB clocks via ccu_clk_gate for R40, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement USB bus and USB resets via ccu_reset table for R40, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18clk: sunxi: Add Allwinner A83T CLK driverJagan Teki
Add initial clock driver for Allwinner A83T. - Implement USB bus and USB clocks via ccu_clk_gate table for A83T, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement USB bus and USB resets via ccu_reset table for A83T, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18clk: sunxi: Add Allwinner A23/A33 CLK driverJagan Teki
Add initial clock driver for Allwinner A23/A33. - Implement USB bus and USB clocks via ccu_clk_gate table for A23/A33, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement USB bus and USB resets via ccu_reset table for A23/A33, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18clk: sunxi: Add Allwinner A31 CLK driverJagan Teki
Add initial clock driver for Allwinner A31. - Implement USB ahb1 and USB clocks via ccu_clk_gate table for A31, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement USB ahb1 and USB resets via ccu_reset table for A31, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18clk: sunxi: Add Allwinner A10s/A13 CLK driverJagan Teki
Add initial clock driver for Allwinner A10s/A13. - Implement USB ahb and USB clocks via ccu_clk_gate table for A10s/A13, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement USB resets via ccu_reset table for A10s/A13, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18clk: sunxi: Add Allwinner A10/A20 CLK driverJagan Teki
Add initial clock driver for Allwinner A10/A20. - Implement USB ahb and USB clocks via ccu_clk_gate table for A10/A20, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement USB resets via ccu_reset table for A10/A20, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18clk: sunxi: Add Allwinner H3/H5 CLK driverJagan Teki
Add initial clock driver for Allwinner H3/H5. - Implement USB bus and USB clocks via ccu_clk_gate table for H3/H5, so it can accessed in common clk enable and disable functions from clk_sunxi.c - Implement USB bus and USB resets via ccu_reset table for H3/H5, so it can accessed in common reset deassert and assert functions from reset-sunxi.c Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18reset: Add Allwinner RESET driverJagan Teki
Add common reset driver for all Allwinner SoC's. Since CLK and RESET share common DT compatible, it is CLK driver job is to bind the reset driver. So add CLK bind call on respective SoC driver by passing ccu map descriptor so-that reset deassert, deassert operations held based on ccu reset table defined from CLK driver. Select DM_RESET via CLK_SUNXI, this make hidden section of RESET since CLK and RESET share common DT compatible and code. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18clk: Add Allwinner A64 CLK driverJagan Teki
Add initial clock driver for Allwinner A64. Implement USB clock enable and disable functions for OHCI, EHCI, OTG and USBPHY gate and clock registers via ccu clk gate table. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-14clk: MediaTek: bind ethsys reset controllerWeijie Gao
The ethsys contains not only the clock gating controller, but also the reset controller for the whole ethernet subsystem and its components. This patch adds binding of the reset controller so that the ethernet node can have references on it. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-01-09clk: imx8: fix build warningPeng Fan
When build clk driver in spl, met the warning: " drivers/clk/imx/clk-imx8.c:21:25: warning: ‘imx8_clk_names’ defined but not used [-Wunused-variable] static struct imx8_clks imx8_clk_names[] = { ^~~~~~~~~~~~~~ " Fix with wrapping the array with CONFIG_CMD_CLK. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-12-29clk: uniphier: add NAND 200MHz clockMasahiro Yamada
The Denali NAND controller IP needs three clocks: - clk: controller core clock - clk_x: bus interface clock - ecc_clk: clock at which ECC circuitry is run Currently, only the first one (50MHz) is provided. The rest of the two clock ports must be connected to the 200MHz clock line. Add this. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-06clk: stm32: add hardware spinlock clockBenjamin Gaignard
Add hardware spinlock in the list of the clocks. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-06clk: Allow clock defaults to be set during re-reloc state for SPL onlyPhilipp Tomsich
In commit e5e06b65ad65 ("clk: Allow clock defaults to be set also during re-reloc state") the earlier guard against setting clock defaults in pre-reloc state was removed. While it is easy to filter 'assigned-clocks' properties for SPL using CONFIG_OF_SPL_REMOVE_PROPS, no such mechanism exists for the pre-reloc stage of the full U-Boot. With the default defconfig for the RK3399-Q7 (which filter the 'assigned-clocks' property for the DTS used by SPL anyway), this caused a pause during startup of the full U-Boot stage that lasted for almost 10s (due to the CPU not having been clocked up yet). This reintroduces the guard from commit f4fcba5c5baa ("clk: Allow clock defaults to be set also during re-reloc state") and extends it to only apply outside of a TPL/SPL build: i.e. clk_set_defaults will now run in pre-reloc state for SPL, but only after reloc for the full U-Boot. References: commit f4fcba5c5baa ("clk: implement clk_set_defaults()") References: commit e5e06b65ad65 ("clk: Allow clock defaults to be set also during re-reloc state") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-03Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- MMC fixes for R-Car Gen3
2018-12-03ARM: meson: Add regmap support for clock driverLoic Devulder
This patch modifies the meson clock driver to use syscon/regmap like the Linux kernel does, as it is needed if we want to share the same DTS files. DTS files are synchronized from Linux 4.19. Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-12-03clk: renesas: Allow reconfiguring SDHI clock on Gen3Marek Vasut
The SDHI clock must be configured differently for HS200/HS400/SDR104 modes. Add support for reconfiguring the SDHI clock settings into the clock driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-11-30rockchip: rk3399: Initialize CPU B clock.Christoph Muellner
This patch sets the PLL of CPU cluster B (BPLL) to 600 MHz. This decreases the boot time of Linux 4.19 by about 8%. The 600 MHz are inspired by the 600 MHz used for LPLL initialization (came in with commit 9f636a249c1). Tested on RK3399-Q7 on Haikou base board. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-11-30ARM: rockchip: rv1108: Sync clock with vendor treeOtavio Salvador
Make adjustments to the rv1108 clock driver in order to align it with the internal Rockchip version. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-11-29Merge tag 'u-boot-amlogic-20181126' of git://git.denx.de/u-boot-amlogicTom Rini
Cleanup and update towards support for Amlogic Meson AXG SoCs : - mmc: meson-gx: Add AXG compatible - net: designware: add meson meson compatibles - Amlogic Meson cleanup for AXG SoC support
2018-11-28clk: MediaTek: add clock driver for MT7623 SoC.Ryder Lee
This patch adds a driver for MT7623 clock blocks. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-28clk: MediaTek: add clock driver for MT7629 SoC.Ryder Lee
This patch adds clock modules for MediaTek SoCs: - Shared part: a common driver which contains the general operations for plls, muxes, dividers and gates so that we can reuse it in future. - Specific SoC part: the group of structures used to hold the hardware configuration for each SoC. We take MT7629 as an example to demonstrate how to implement driver if any other MediaTek chips would like to use it. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-26clk: Add clock driver for AXGNeil Armstrong
This patch adds a minimal clock driver for the Amlogic AXG SoC to handle the basic gates and PLLs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26ARM: meson: rework soc arch file to prepare for new SoCJerome Brunet
We are about to add support for the Amlogic AXG SoC. While very close to the Gx SoC family, we will need to handle a few thing which are different in this SoC. Rework the meson arch directory to prepare for this. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26clk: meson: silence debug printJerome Brunet
This debug print was not designed to be active in non-debug mode. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26clk: meson: add static to meson_gates tableNeil Armstrong
The meson_gates table should be set static in the clk_meson driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-20misc: Update read() and write() methods to return bytes xferedSimon Glass
At present these functions return 0 on success. For some devices we want to know how many bytes were transferred. It seems useful to adjust the API to be more like the POSIX read() and write() functions. Update these two methods, a test and all users. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-11-20clk: meson: fix clk81 divider calculationJerome Brunet
clk81 divider is 0 based (meaning that 0 value in the register means divide by 1). Fix clk81 rate calculation for this. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-16clk: Allow clock defaults to be set also during re-reloc stateAndreas Dannenberg
The earlier commit f4fcba5c5ba ("clk: implement clk_set_defaults()") which introduced the functionality for setting clock defaults such as rates and parents will skip the processing when executing in a re-reloc state. This for example can prevent the assigning of clock parents when running in SPL code. Go ahead and remove this limitation. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-11-14clk: Remove DM_FLAG_PRE_RELOC flag in various driversBin Meng
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be bound before relocation. However due to a bug in the DM core, the flag only takes effect when devices are statically declared via U_BOOT_DEVICE(). This bug has been fixed recently by commit "dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()", but with the fix, it has a side effect that all existing drivers that declared DM_FLAG_PRE_RELOC flag will be bound before relocation now. This may expose potential boot failure on some boards due to insufficient memory during the pre-relocation stage. To mitigate this potential impact, the following changes are implemented: - Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver only supports configuration from device tree (OF_CONTROL) - Keep DM_FLAG_PRE_RELOC flag in the driver only if the device is statically declared via U_BOOT_DEVICE() - Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for drivers that support both statically declared devices and configuration from device tree Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-05aspeed: ast2500: fix D2-PLL clock setting in RGMII modeCédric Le Goater
The algorithm in the ast2500_calc_clock_config() routine suffers from integer rounding and the requested rate does not get the appropriate set of Numerator, Denumerator, Post Divider parameters. This is the case for the D2-PLL clock used by the MAC controllers in RGMII mode. The requested rated is 250MHz but a 251MHz is assigned. The easiest way to fix this problem is to introduce an array of clock settings defining the N, M, P parameters for well known frequencies used by the Aspeed SoC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05aspeed: ast2500: fix missing break in D2PLL clock enablementCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit (git 2.34.1) at 2025-01-08 13:19:35 +0000