summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2020-01-20Merge tag '2020-01-20-ti-2020.04' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti K3 J721E: * DMA support. * MMC and ADMA support. * EEPROM support. * J721e High Security EVM support. * USB DT nodes K3 AM654: * Fixed boot due to pmic probe error. * USB support and DT nodes. * ADMA support DRA7xx/AM57xx: * BBAI board support * Clean up of net platform code under board/ti AM33/AM43/Davinci: * Reduce SPL size for omap3 boards. * SPL DT support for da850-lcdk * PLL divider fix for AM335x
2020-01-20clk: sci-clk: add slack to clk-set-rate passed to firmwareLokesh Vutla
Add slack to the clock frequency parameters passed to firmware within clk_set_rate. min-freq is changed to 0 and max-rate is changed to ULONG_MAX. This fixes certain issues with pll clock rounding when the firmware is not able to set the frequency exactly to the target, the current implementation fails if the available frequency is even 1Hz off the target. With the change, the firmware still tries its best to set the frequency as close as possible to the target. Reported-by: Vishal Mahaveer <vishalm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-17common: Move get_tbclk() to time.hSimon Glass
This function related to timer and most of the timer functions are in time.h, so move this function there. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move clock functions into a new fileSimon Glass
These three clock functions don't use driver model and should be migrated. In the meantime, create a new file to hold them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-16clk: mediatek: fix clock-rate overflow problemSam Shih
This patch fix clock-rate overflow problem in mediatek clock driver common part. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16clk: mediatek: add driver for MT7622Sam Shih
This patch add clock driver for MediaTek MT7622 SoC. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2020-01-16clk: fixed_rate: add dummy enable() functionChunfeng Yun
This is used to avoid clk_enable() return -ENOSYS. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16clk: add APIs to get (optional) clock by name without a deviceChunfeng Yun
Sometimes we may need get (optional) clock without a device, that means use ofnode. e.g. when the phy node has subnode, and there is no device created for subnode, in this case, we need these new APIs to get subnode's clock. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16clk: check valid clock by clk_valid()Chunfeng Yun
Add valid check for clk->dev, it's useful when get optional clock even when the clk point is valid, but its dev will be NULL. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16clk: fix error check for devm_clk_get_optional()Chunfeng Yun
If skip all return error number, it may skip some real error cases, so only skip the error when the clock is not provided in DTS Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16clk: mediatek: mt7629: add support for ssusbsysChunfeng Yun
The SSUSB IP's clocks come from ssusbsys module on mt7629, so add its driver Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16clk: mediatek: add configurable pcw_chg_reg/ibits/fmin to mtk_pllmingming lee
Add configurable pcw_chg_reg/ibits/fmin to mtk_pll to support mt8512
2020-01-16clk: mediatek: add set_clr_upd mux type flowmingming lee
Add new set_clr_upd mux type and related operation to mtk common clock driver to support mt8512
2020-01-16clk: mediatek: add driver support for MT8512mingming lee
Add clock driver for MediaTek MT8512 SoC, include topckgen, apmixedsys and infracfg support. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-14clk: imx: add i.IMXRT1050 clk driverGiulio Benetti
Add i.MXRT1050 clk driver support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14clk: imx: pfd: add set_rate()Giulio Benetti
Implement set_rate() for pfd. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: add support for PLLV3_AV typeGiulio Benetti
Add support for PLLV3 AV type. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14clk: imx: pllv3: add PLLV3_SYS supportGiulio Benetti
Add PLLV3_SYS support by adding set/get_rate() for PLLV3_SYS but keeping generic enable()/disable(). Add a different driver because ops are different respect to GENERIC/USB. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: add set_rate() supportGiulio Benetti
Add generic set_rate() support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: add disable() supportGiulio Benetti
Add disable() support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: add enable() supportGiulio Benetti
Before set_rate() pllv3 needs enable() to power the pll up. Add enable() taking into account different power_bit and different powerup_set, because some pll needs its power_bit to be set or reset to be powered on. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14clk: imx: pllv3: set div_mask differently if PLLV3 is GENERIC or USBGiulio Benetti
div_mask is different for GENERIC and USB pll, so set it according. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: register PLLV3 GENERIC and USB as 2 different clocksGiulio Benetti
Better to register the 2 clock as 2 different drivers because they work slightly differently depending on power_bit and powerup_set bits coming on next patches. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx8qxp: extend to support getting I2C IPG clockAnatolij Gustschin
Since commit d02be21d3004 ("i2c: imx_lpi2c: add ipg clk") getting I2C clocks doesn't work. Add I2C IPG clock IDs to related switch statements to fix it. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Lukasz Majewski <lukma@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-01-09Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-mpc83xxTom Rini
- A small PR with MC8309 fixes from Rasmus.
2020-01-09Merge tag 'dm-pull-8jan20' of git://git.denx.de/u-boot-dmTom Rini
dm: Increased separation of ofdata_to_platdata() and probe methods
2020-01-08Merge tag 'efi-2020-04-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc1 This pull request provides: * support for FIT images for UEFI binaries * drivers for hardware random number generators * an implementation of the EFI_RNG_PROTOCOL * a sub-command for efidebug to display configuration tables
2020-01-08Merge tag 'u-boot-imx-20200108' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------------------------------------------- Add i.MX8MP SoC and EVK board Update README for i.MX8MN EVK and fix mmc env Add pca9450 driver -------------------------------------------------------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
2020-01-08clk: imx: add i.MX8MP clk driverPeng Fan
Add i.MX8MP clk driver for i.MX8MP CLK driver model usage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08clk: imx: add imx_clk_mux2_flagsPeng Fan
Add imx_clk_mux2_flags which will be used by i.MX8MP Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08mpc83xx_clk: always treat MPC83XX_CLK_PCI as invalidRasmus Villemoes
The current mpc83xx_clk driver is broken for any board for which mpc83xx_has_pci() is true, i.e. anything not MPC8308: When is_clk_valid() reports that MPC83XX_CLK_PCI is valid, init_all_clks() proceeds to call init_single_clk(), but that doesn't know about either MPC83XX_CLK_PCI or has any handling of the TYPE_SCCR_ONOFF mode correctly returned by retrieve_mode(). Hence init_single_clk() ends up returning -EINVAL, and the whole board hangs in serial_init(). The quickest fix is to simply pretend that clock is invalid for all, since nobody can have been relying on it. Adding proper support seems to be a bit more involved than just handling TYPE_SCCR_ONOFF: - The power-on-reset value of SCCR[PCICM] is 0, so mpc83xx_clk_enable() would probably need to be tought to enable the clock. - The frequency of PCI_SYNC_OUT is either SYS_CLK_IN or SYS_CLK_IN/2 depending on the CFG_CLKIN_DIV configuration input, but that can't be read from software, so to properly fill out ->speed[MPC83XX_CLK_PCI] I think one would need guidance from Kconfig or dtb. Partially fixes: 07d538d281 clk: Add MPC83xx clock driver Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Mario Six <mario.six@gdsys.cc>
2020-01-07aspeed: ast2500: Read clock ofdata in the correct methodSimon Glass
At present the clock driver reads its ofdata in the probe() method. This is not correct although it is often harmless. However in this case it causes a problem, something like this: - ast_get_scu() is called (from somewhere) to get the SCI address - this probes the clock - first sets up ofdata (which does nothing at present) - DM marks clock device as active - DM calls pinctrl - pinctrl probes and calls ast_get_scu() in ast2500_pinctrl_probe() - ast_get_scu() probes the clock, but sees it already marked as probed - ast_get_scu() accesses the clock's private data, with scu as NULL - DM calls clock probe function ast2500_clk_probe() which reads scu By putting the read of scu into the correct method, scu is read as part of ofdata setup, and everything is OK. Note: This problem did not matter until now since DM always probed all parents before reading a child's ofdata. The fact that pinctrl is a child of clock seems to trigger this strange bug. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
2020-01-07clk: stm32mp1: Add a clock entry for RNG1 deviceSughosh Ganu
Add an entry for allowing clock enablement for the random number generator peripheral, RNG1. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-07clk: agilex: Add clock driver for AgilexLey Foon Tan
Add clock manager driver for Agilex. Provides clock initialization and get_rate functions. agilex-clock.h is from Linux commit ID cd2e1ad12247. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-12-09Merge tag 'u-boot-imx-20191209' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2020.01 ----------------- - imx8qxp_mek: increase buffer sizes and args number - Fixes for imx7ulp - imx8mm: Fix the first root clock in imx8mm_ahb_sels[] - colibri_imx7: reserve DDR memory for Cortex-M4 - vining2000: fixes and convert to ethernet DM - imx8m: fix rom version check to unbreak some B0 chips - tbs2910: Disable VxWorks image booting support
2019-12-06clk: imx: imx8mm: Fix the first root clock in imx8mm_ahb_sels[]Frieder Schrempf
The 24MHz oscillator clock is referenced by "clock-osc-24m" and not "osc_24m". Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-12-03clk: mediatek: add driver for MT8518mingming lee
Add clock driver for MediaTek MT8518 SoC. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-02common: Move get_ticks() function out of common.hSimon Glass
This function belongs in time.h so move it over and add a comment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02Move strtomhz() to vsprintf.hSimon Glass
At present this function sits in its own file but it does not really justify it. There are similar string functions in vsprintf.h, so move it there. Also add the missing function comment. Use the vsprintf.h include file explicitly where needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-17rockchip: clk: Add clk driver for rk3308Finley Xiao
Add clk controller driver for RK3308 SOC. This patch depends on Elaine's pll patch[0]. [0]http://patchwork.ozlabs.org/patch/1183718/ Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: clk: pll: add common pll setting funcsElaine Zhang
Common PLL setup function, compatible with different SOC. Mainly for the subsequent new SOC use. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: clk: fix wrong CONFIG_IS_ENABLED handlingHeiko Stuebner
CONFIG_IS_ENABLED() needs the config name like used in Kconfig, so without the leading CONFIG_. The clock drivers all wrongly check for CONFIG_RESET_ROCKCHIP, fix that Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: clk: rv1108: remove duplicate reset initHeiko Stuebner
rockchip_reset_bind() already does the needed init for the reset registers, only referenced the wrong cru structure. So we can get rid of the open-coded reset init and just fix the correct cru reference. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: clk: add px30 clock driverKever Yang
The px30 contains 2 separate clock controllers, pmucru and cru. Add drivers for them. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-12Merge tag 'u-boot-imx-20191105' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191105 ------------------- i.MX8MN SoC support ROM API image download support i.MX8MM enet enabling
2019-11-11Merge tag 'u-boot-rockchip-20191110' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add support for rockchip pmic rk805,rk809, rk816, rk817 - Add rk3399 board Leez support - Fix bug in rk3328 ram driver - Adapt SPL to support ATF bl31 with entry at 0x40000 - Fix the u8 type comparision with '-1'. - Fix checkpatch warning for multi blank line and review signature.
2019-11-10clk: rockchip: rk3328: Configure CPU clockSimon South
Add a call to rk3328_configure_cpu() during initialization to set the CPU-clock frequency. Signed-off-by: Simon South <simon@simonsouth.net> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-07clk: clk-ti-sci: Notify AVS driver upon setting clock rateKeerthy
Notify AVS driver upon setting clock rate so that voltage is changed accordingly. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-05clk: imx: imx8mm: add set_parent callbackPeng Fan
Add set_parent callback, then assigned-clock-parents in dts could be work. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-11-05clk: imx8mm: add enet clkPeng Fan
Add enet ref/timer/PHY_REF/root clk which are required to make enet function well. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
generated by cgit (git 2.34.1) at 2024-12-29 01:47:01 +0000