summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2019-07-24clk: initialize clk->data when using default xlateSekhar Nori
Right now when using clk_of_xlate_default(), clk->data remains un-initialized because clk_get_bulk() does not initialize memory on allocation of clock structure. This can cause problems when data is used to match if two clocks pointers are exactly the same underlying clocks, for example. Fix it by initializing clk->data to 0. Suggested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-07-23Merge tag 'u-boot-stm32-20190723' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - add rtc driver for stm32mp1 - add remoteproc driver for stm32mp1 - use kernel qspi compatible string for stm32
2019-07-22clk: stm32mp1: Add RTC clock entryPatrick Delaunay
Add RTCAPB and RTC clock support. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-21Merge tag 'rockchip-for-v2019.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - rk3399 lpddr4 support - rk3399-rock960 board support improvement - Eliminate pyelftools dependency by make_fit_atf.py - clean up rockchip dts to use -u-boot.dtsi - use ARM arch/generic timer instead of rk_timer - clean up Kconfig options for board support
2019-07-21clk: rockchip: rk3399: Set 400MHz ddr clockJagan Teki
Add support for setting 400MHz ddr clock. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21clk: rockchip: rk3399: Set 50MHz ddr clockJagan Teki
Add support for setting 50MHz ddr clock. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19clk: sifive: Drop GEMGXL clock driverAnup Patel
The GEMGXL clock driver is now directly part of Cadence MACB ethernet driver in upstream Linux kernel. There is no separate GEMGXL clock driver in upstream Linux kernel hence we drop GEMGXL clock driver from U-Boot as well. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-19clk: sifive: Sync-up main driver with upstream LinuxAnup Patel
The DT bindings of SiFive clock driver in upstream Linux has changes. As-per latest DT bindings, the clock driver takes two parent clocks and compatible string has also changed. This patch sync-up SiFive clock driver implementation as-per upstream Linux so that we now use latest DT bindings. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-19clk: sifive: Sync-up DT bindings header with upstream LinuxAnup Patel
The location and license header of DT bindings header for SiFive clock driver has changed in upstream Linux hence this patch. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-19clk: sifive: Sync-up WRPLL library with upstream LinuxAnup Patel
Now that SiFive clock driver is merged in upstream Linux, we sync-up WRPLL library used by SiFive clock driver with upstream Linux sources. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-19clk: sifive: Factor-out PLL library as separate moduleAnup Patel
To match SiFive clock driver with latest Linux, we factor-out PLL library as separate module under drivers/clk/analogbits. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-19clk: rockchip: rk3399: Fix check patch warnings and checksJagan Teki
- CHECK: spaces preferred around that '*' - CHECK: spaces preferred around that '/' - CHECK: space preferred before that '|' - WARNING: macros should not use a trailing semicolon - CHECK: Unnecessary parentheses around 'fbdiv <= min_fbdiv' - CHECK: Unnecessary parentheses around 'parent->id == SCLK_MAC' - CHECK: Unnecessary parentheses around 'parent->dev == clk->dev' - WARNING: line over 80 characters - CHECK: Prefer kernel type 'u8' over 'uint8_t' - Add proper macro definitions arrangements Note: there are still line over 80 characters and other warnings but fixing those making code look unreadable, so I kept it as it is. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19rockchip: clk: rk3399: handle clk_enable requests for USB3Mark Kettenis
The "simple" OF glue layer for the Designware USB3 core enables all refernced clocks. These need to be need to be implemented otherwise the driver fails to probe. A dummy implementation that simply returns success is sufficient since the RK3399 comes out of reset with all clock gates open. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-16Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- Beelink-x2 STB support (Marcus) - H6 DDR3, LPDDR3 changes (Andre, Jernej) - H6 pin controller, USB PHY (Andre)
2019-07-16sunxi: clocks: Add H6 USB clock gates and resetsAndre Przywara
To enable USB support in U-Boot, add the required clock and reset gates to the H6 clock driver. Once enabled, the generic EHCI/OCHI drivers will pick them up from there automatically. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> # Pine-H64 Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-14Merge tag 'u-boot-stm32-20190712' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - syscon: add support for power off - stm32mp1: add op-tee config - stm32mp1: add specific commands: stboard and stm32key - add stm32 mailbox driver - solve many stm32 warnings when building with W=1 - update stm32 gpio driver
2019-07-12clk: clk_stm32mp1: Fix warnings when compiling with W=1Patrick Delaunay
This patch solves the following warnings: drivers/clk/clk_stm32mp1.c: In function 'stm32mp1_clk_get_parent': warning: comparison between signed and unsigned integer expressions [-Wsign-compare] for (i = 0; i < ARRAY_SIZE(stm32mp1_clks); i++) ^ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: syscon: remove stgenPatrick Delaunay
Reduce difference with kernel Linux device tree. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-10clk: uniphier: add EMMC clock for LD11, LD20, and PXs3Masahiro Yamada
I also added comments for NAND clocks. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-11Merge tag 'u-boot-stm32-20190606' of https://github.com/pchotard/u-bootTom Rini
- Add Ethernet support for STM32MP1 - Add saveenv support for STM32MP1 - Add STM32MP1 Avenger96 board support - Add SPI driver suport for STM32MP1 - Add watchdog support for STM32MP1 - Update power supply check via USB TYPE-C for STM32MP1 discovery board
2019-06-11clk: imx8qm: fix usdhc2 clocksMarcel Ziswiler
Trying to bring up uSDHC2 the following error message was observed: MMC: imx8_clk_set_rate(Invalid clk ID #60) imx8_clk_set_rate(Invalid clk ID #60) usdhc@5b030000 - probe failed: -22 This commit fixes this by properly setting resp. clocks. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-06-06stm32mp1: clk: use the correct identifier for ethckPatrick Delaunay
ETHCK_K is the identifier the kernel clock for ETH in kernel binding, selected by ETHKSELR / gated by ETHCKEN = BIT(7). U-Boot driver need to use the same identifier, so change ETHCK to ETHCK_K. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
2019-06-06clk: stm32mp1: Add SPI1 clock entryPatrice Chotard
Add missing SPI1 clock needed by SPI1 instance. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-01clk: sifive: Add clock driver for GEMGXL MGMTBin Meng
This adds a clock driver to support the GEMGXL management IP block found in FU540 SoCs to control GEM TX clock operation mode for 10/100/1000 Mbps. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Tested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-05-31Merge tag 'rockchip-for-v2019.07-rc3' of git://git.denx.de/u-boot-rockchipTom Rini
- some fix for rk3399-puma; - rockchip script make_fit_atf.py cleanup - Enable TPL for rk3399 orangepi and nanopi4; - add support for rk3399 boards: Nanopi NEO4, Rockpro64, Rock PI 4;
2019-05-31clk: meson-g12a: Add PCIE PLL supportNeil Armstrong
The G12A PCIE PLL clock was introduced in Linux 5.2-rc1, and is needed for USB to operate, add basic support for it and associated gates. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-30rockchip: clk: rk3399: allow requests for all UART clocksChristoph Muellner
This patch adds the rate for UART1 and UART3 the same way as already implemented for UART0 and UART2. This is required for boards, which have their console output on these UARTs. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-23clk: stm32mp1: add set_rate for DDRPHYC clockPatrick Delaunay
Add the DDRPHYC support for clk_set_rate, used in DDR interactive mode Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-21mpc83xx_clk: Add enable methodMario Six
Some DM drivers have hardcoded clk_enable calls when handling clocks (for example the fsl_esdhc driver). To work with these drivers, add an enable method to the MCP83xx clock driver (which does nothing, because the clocks are always enabled). Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-09Merge tag 'rockchip-for-v2019.07-rc1' of git://git.denx.de/u-boot-rockchipTom Rini
Improvements and new features: - split more rockchip pinctrl_core feature into per SoC - enable TPL for evb-rk3399 board - enable TPL/SPL for evb-px5 board - enable TPL and OP-TEE support for evb-rk3229 - update fix in arm common assembly start code for rockchip header file - update default SPL_FIT_GENERATOR for rockchip - rk3399 boards update to use '-u-boot.dtsi' - add new rk3399 boards: Nanopi M4, Nanopc T4 - enable sound for chromebook_minnie
2019-05-08Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
- H6 Beelink GS1 board (Clément) - Olimex A64-Teres-I board (Jonas) - sunxi build fix for CONFIG_CMD_PXE|DHCP (Ondrej) - Change include order (Jagan) - EPHY clock changes (Jagan) - EMAC enablement on Cubietruck Plus, BPI-M3 (Chen-Yu Tsai)
2019-05-09clk: Use clk_get_by_index_tail()Jagan Teki
clk_get_by_index_tail() now handle common clk get by index code so use it from clk_get_by_indexed_prop(). Cc: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-09clk: Get the CLK by index without deviceJagan Teki
Getting a CLK by index with device is not straight forward for some use-cases like handling clock operations for child node in parent driver. So we need to process the child node in parent probe via ofnode and process CLK operation for child without udevice but with ofnode. So add clk_get_by_index_nodev() and move the common code in clk_get_by_index_tail() to use for clk_get_by_index() Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-09clk: sifive: fu540-prci: Change include orderJagan Teki
Like clk_get_by_index, there is requirement for clk_get_by_index_nodev. In this case to make common code functionalities for dev and nodev, clk_get_by_index is trying to get the index of clock by passing ofnode instead of actual dev like current gpio uclass does. In these scenarios with current order of include files the fu540-prci driver is unable to find CONFIG_ENV_SIZE. In file included from arch/riscv/include/asm/u-boot.h:23:0, from include/dm/of.h:10, from include/dm/ofnode.h:12, from include/clk.h:11, from include/clk-uclass.h:13, from drivers/clk/sifive/fu540-prci.c:32: include/environment.h:145:19: error: 'CONFIG_ENV_SIZE' undeclared here (not in a function); did you mean 'CONFIG_CMD_XIMG'? #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE) So, fix consists of changing the order of include files in fu540-prci.c to include first common.h file. Cc: Anup Patel <Anup.Patel@wdc.com> Cc: Rick Chen <rick@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-08rockchip: clk: rk322x: fix assert clock valueKever Yang
BUS_PCLK_HZ and BUS_HCLK_HZ are from BUS_ACLK_HZ, not from GPLL_HZ. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08rockchip: rk322x: add CLK_EMMC_SAMPLE clock supportKever Yang
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-01Merge tag 'rockchip-for-2019.07' of git://git.denx.de/u-boot-rockchipTom Rini
Improvements and new features: - improved SPI driver for better read throughput - refactors initialisation of debug UART init - restructures header file paths - adds pinctrl improvements Adds Kever as a co-custodian.
2019-05-01Merge tag 'u-boot-imx-20190426' of git://git.denx.de/u-boot-imxTom Rini
Porting to DM and i.MX8 ------------------------ - warp7 to DM - kp_imx53 to DM - Warnings in DT - MX8QM support - colibri-imx6ull to DM - imx7d-pico to DM - ocotp for MX8
2019-05-01rockchip: use 'arch-rockchip' as header file pathKever Yang
Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common header file path, so that we can get the correct path directly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-04-25clk: imx8: add i.MX8QM clk driverPeng Fan
Add i.MX8QM clk driver, SDHC/FEC/UART/I2C supported. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25clk: imx8: split code into common and soc specific partPeng Fan
To make it easy to add new clk driver for i.MX8, split the code into common part and SoC specific part. Make the get/set/enable non static and introduce a num_clks for soc_clk_dump, because the arrays are moved to clk-imx8qxp.c. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-24Merge tag 'u-boot-amlogic-20190423' of git://git.denx.de/u-boot-amlogicTom Rini
- Add support for Amlogic p200 & p201 Reference Designs - Add Amlogic SoC information display - Add support for the Libretech-AC AML-S805X-AC board - Add Amlogic AXG reset compatible - Add I2C support for Amlogic AXG - Fix AXG PIN and BANK pinctrl definitions - Fix regmap_read_poll_timeout warning about sandbox_timer_add_offset - Add initial support for Amlogic G12A SoC and U200 board - Enable PHY_REALTEK for selected boards - Fix Khadas VIM2 README
2019-04-23clk: mediatek: add driver for MT8516Fabien Parent
Add clock driver for MediaTek MT8516 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com> [trini: Redo whitespace] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-23clk: mediatek: add support for SETCLR_INV and NO_SETCLR flagsFabien Parent
Add the implementation for the CLK_GATE_SETCLR_INV and CLK_GATE_NO_SETCLR flags. Signed-off-by: Fabien Parent <fparent@baylibre.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2019-04-23clk: meson: add g12a supportJerome Brunet
Add basic support for the Amlogic G12A clock controller based on the AXG driver. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-23clk: create meson directory and move related driversJerome Brunet
In order to support the Amlogic G12A clock controller, re-architect the clock files into a meson directory. No functionnal changes. MAINTAINERS entry is also updated. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-17Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
- Convert DM_MMC and DM_SCSI - A20, R40, H6 Linux dts(i) sync - CLK, RESET support for sunxi, sun8_emac net drivers
2019-04-16clk: sunxi: r40: Fix GMAC reset reg offsetJagan Teki
GMAC reset reg offset added by below commit seems to assume it as EMAC but R40 indeed using GMAC. "clk: sunxi: Implement EMAC, GMAC clocks, resets" (sha1: 68620c9698f109c1f001f80d282138a5c67cabef) So, fix by updating the reg offset for RST_BUS_GMAC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-16ARM: zynq: Add missing i2c get_rate for fixing i2c SPLHannes Schmelzer
The commit 'f48ef0d81aa837a33020f8d61abb3929ba613774' did break I2C support because requesting the clock for the I2C ip-block isn't supported during SPL. To fixup this we add support requesting clocks for: - i2c0 - i2c1 Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-13Merge tag 'pull-12apr19' of git://git.denx.de/u-boot-dmTom Rini
fdtdec tests and improvements for carve-outs pinctrl race-condition fix various other fixes in sandbox, sound, mkimage, etc.
generated by cgit (git 2.34.1) at 2025-01-19 18:31:55 +0000