summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2019-12-03gpio: at91_gpio: Add bank namesJames Byrne
Make the at91_gpio driver set sensible GPIO bank names in the platform data. This makes the 'gpio status' command a lot more useful. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-30gpio: da8xx_gpio: Fix the _gpio_direction_output functionKeerthy
_gpio_direction_output function currently calls gpio_set_value with the wrong gpio number. gpio_set_value in the uclass driver expects a different gpio number and the _gpio_direction_output is currently providing the number specific to the bank. Hence fix it by calling the _gpio_set_value function instead. Reported-by: Faiz Abbas <faiz_abbas@ti.com> Fixes: 8e51c0f254 ("dm: gpio: Add DM compatibility to GPIO driver for Davinci") Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-10-24gpio: zynq: Add gpio driver support for PMC gpioShubhrajyoti Datta
This patch adds support for gpio driver for pmc gpio. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24gpio: zynq: Add gpio driver support for VersalAshok Reddy Soma
This patch adds support for gpio driver for versal platform Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-18gpio: sifive: add support for DM based gpio driver for FU540-SoCSagar Shrikant Kadam
This patch adds a DM based driver model for gpio controller present in FU540-C000 SoC on HiFive Unleashed A00 board. This SoC has one GPIO bank and 16 GPIO lines in total, out of which GPIO0 to GPIO9 and GPIO15 are routed to the J1 header on the board. This implementation is ported from linux based gpio driver submitted for review by Wesley W. Terpstra <wesley@sifive.com> and/or Atish Patra <atish.patra@wdc.com> (many thanks !!). The linux driver can be referred here [1] [1]: https://lkml.org/lkml/2018/10/9/1103 Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-09Merge tag 'xilinx-for-v2020.01' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.01 FPGA: - Enable fpga loading on Versal - Minor fix Microblaze: - Fix LMB configurations to support initrds - Some other cleanups Zynq: - Minor config/dt changes - Add distro boot support for usb1 and mmc1 - Remove Xilinx private boot commands and use only distro boot ZynqMP: - Kconfig cleanups, defconfig updates - Update some dt files - Add firmware driver for talking to PMUFW - Extend distro boot support for jtag - Add new IDs - Add system controller configurations - Convert code to talk firmware via mailbox or SMCs Versal: - Add board_late_init() - Add run time DT memory setup - Add DFU support - Extend distro boot support for jtag and dfu - Add clock driver - Tune mini configurations Xilinx: - Improve documentation (boot scripts, dt binding) - Enable run time initrd_high calculation - Define default SYS_PROMPT - Add zynq/zynqmp virtual defconfig Drivers: - Add Xilinx mailbox driver for talking to firmware - Clean zynq_gem for Versal - Move ZYNQ_HISPD_BROKEN to Kconfig - Wire genphy_init() in phy.c - Add Xilinx gii2rgmii bridge - Cleanup zynq_sdhci - dwc3 fix - zynq_gpio fix - axi_emac fix Others: - apalis-tk1 - clean config file
2019-10-09Merge tag 'u-boot-imx-20191009' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191009 ------------------- Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/595148532 - MX6UL / ULZ - Toradex board - Allow to set OCRAM for MX6Q/D - MX7ULP - MX8: (container image, imx8mq_mek), SCU API - fix several board booting from SD/EMMC (cubox-i for example) - pico boards [trini: display5 merged manually] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-08spi: Add support for SPL_OF_PLATDATA to mxs_gpio.c driverLukasz Majewski
After this patch the mxs_gpio.c DM/DTS driver can be used at early SPL to read states of gpio pins (and for example alter the boot flow). It was necessary to adjust its name to 'fsl_imx_2{38}_gpio' to match requirements for SPL_OF_PLATDATA usage. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08gpio: zynq: fix issue in set gpio output directionAshok Reddy Soma
This patch fixes zynq_gpio_direction() to call driver specific zynq_gpio_set_value function rather than top level gpio_set_value. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08spl: Allow tiny printf() to be controlled in SPL and TPLSimon Glass
At present there is only one control for this and it is used for both SPL and TPL. But SPL might have a lot more space than TPL so the extra cost of a full printf() might be acceptable. Split the option into two, providing separate SPL and TPL controls. The TPL setting defaults to the same as SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08sandbox: spmi: Add ranges property for address translationSimon Glass
At present address translation does not work since there is no ranges property in the spmi nodes. Add empty ranges properties and a little more logging so that this shows the error: /tmp/b/sandbox/u-boot -d /tmp/b/sandbox/arch/sandbox/dts/test.dtb \ -c "ut dm spmi_access_peripheral" -L7 -v ... pm8916_gpio_probe() bad address: returning err=-22 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-23kconfig: Convert CONFIG_MXS_GPIO to KconfigLukasz Majewski
This converts the following to Kconfig: CONFIG_MXS_GPIO Travis-CI: https://travis-ci.org/lmajewski/u-boot-dfu/builds/571260789 Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Peng Fan <peng.fan@nxp.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-29gpio: fixes for gpio-hog supportHeiko Schocher
recently added gpio hog patch was "in discussion" state with Simon Glass. This patch now adds most of comments from Simon Glass. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-19gpio: Add missing parenthesis to the GPIO_TO_PORT defineLukasz Majewski
Add missing parenthesis to the GPIO_TO_PORT macro. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-07-19gpio: mxs: Add support for DM/DTS in the mxs_gpio.c driver (DM_GPIO)Lukasz Majewski
This patch adds support for DM/DTS in the mxs_gpio.c driver. Information regarding per gpio controller pin number is passed via DTS. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-16Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- Beelink-x2 STB support (Marcus) - H6 DDR3, LPDDR3 changes (Andre, Jernej) - H6 pin controller, USB PHY (Andre)
2019-07-16sunxi: gpio: Enable support for H6 pin controllerAndre Przywara
The Allwinner H6 pin controller is not really special, at least not when it comes to normal GPIO operation. Add the H6 compatible strings to the list of recognised strings, to make GPIOs work for H6 boards. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> # Pine-H64 Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-16sunxi: move SUNXI_GPIO to KconfigAndre Przywara
Probably for no particular reason SUNXI_GPIO was still defined the "old way", in header files only. Introduce SUNXI_GPIO to the Kconfig file in drivers/gpio to remove another line from our dreadful config_whitelist.txt. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> # Pine-H64 Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-14Merge tag 'u-boot-stm32-20190712' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - syscon: add support for power off - stm32mp1: add op-tee config - stm32mp1: add specific commands: stboard and stm32key - add stm32 mailbox driver - solve many stm32 warnings when building with W=1 - update stm32 gpio driver
2019-07-13gpio: add gpio-hog supportHeiko Schocher
add gpio-hog support. GPIO hogging is a mechanism providing automatic GPIO request and configuration as part of the gpio-controller's driver probe function. for more infos see: doc/device-tree-bindings/gpio/gpio.txt Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Michal Simek <michal.simek@xilinx.com> (zcu102) Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12gpio: stm32: Remove .ofmatch callbackPatrice Chotard
As compatible string "st,stm32-gpio" is no more used, .ofmatch callback becomes useless, remove it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12gpio: stm32: Rename stm32f7_gpio to stm32_gpioPatrice Chotard
As this driver is used on stm32f4/f7/h7 and stm32mp1 SoCs, rename it with a more generic name. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12gpio: stm32_gpio: Fix warnings when compiling with W=1Patrick Delaunay
This patch solves the following warnings: drivers/gpio/stm32_gpio.c: In function 'stm32_offset_to_index': : comparison between signed and unsigned integer expressions [-Wsign-compare] if (idx == offset) ^~ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-11gpio: pca953x: Add TI TCA9539 compatible stringMarek Vasut
Add TI TCA9539 compatible string for yet another I2C GPIO expander. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Mario Six <mario.six@gdsys.cc> Cc: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-05-24gpio: dwapb_gpio: fix broken dev->nodeSimon Goldschmidt
commit 1b898ffc040b ("gpio: dwapb_gpio: convert to livetree") introduced a bug in that dev->node of the gpio chip was accidentally set to the of_node of its bank subnode. What it meant to do was assign subdev->node, not dev->node. While this doesn't affect too many use cases, iterating over the gpio chip's properties doesn't work any more after that, so fix this. Fixes: commit 1b898ffc040b ("gpio: dwapb_gpio: convert to livetree") Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-10gpio: dwapb_gpio: convert to livetreeSimon Goldschmidt
Convert 'gpio_dwapb_bind' to iterate over subnodes using livetree functions (inspired from mt7621_gpio.c). Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-07gpio: renesas: Add RZ/A1 R7S72100 GPIO driverMarek Vasut
Add GPIO driver for RZ/A1 SoC. The IP is very different from the R-Car Gen2/Gen3 one already present in the tree, hence a custom driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-06Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Various pinctrl / gpio fixes for R-Car
2019-05-04Merge tag 'mips-pull-2019-05-03' of git://git.denx.de/u-boot-mipsTom Rini
- mscc: small fixes, enhance network support for Serval, Luton and Ocelot - mt7620: rename arch to more generic name mtmips - mips: pass initrd addresses via DT as physical addresses
2019-05-04gpio: renesas: Migrate to pinctrl GPIO accessorsMarek Vasut
Switch to generic pin controller API for configuring pins as GPIOs instead of using the ad-hoc call into the R-Car PFC driver. Moreover, add .free() implementation for the GPIO controller. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Christoph Muellner <christoph.muellner@theobroma-systems.com> Cc: Eugeniu Rosca <roscaeugeniu@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick DELAUNAY <patrick.delaunay@st.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Simon Glass <sjg@chromium.org>
2019-05-03mips: rename mach-mt7620 to mach-mtmipsWeijie Gao
Currently mach-mt7620 contains only support for mt7628. To avoid confusion, rename mach-mt7620 to mach-mtmips, which means MediaTek MIPS platforms. MT7620 and MT7628 should be distinguished by SOC_MT7620 and SOC_MT7628 because they do not share the same lowlevel codes. Dependencies of four drivers are changed to SOC_MT7628 as these drivers are only used by MT7628. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-05-01rockchip: use 'arch-rockchip' as header file pathKever Yang
Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common header file path, so that we can get the correct path directly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-04-12gpio: bcm6345: allow this driver on ARCH_BCM63158Philippe Reynes
This IP is also used on some arm SoC, so we allow to use this driver on arch bcm63158. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-12gpio: bcm6345: allow this driver on ARCH_BCM6858Philippe Reynes
This IP is also used on some arm SoC, so we allow to use this driver on arch bcm6858. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-12gpio: bcm6345: switch to raw I/O functionsPhilippe Reynes
This driver is used on several big endian mips board. So we could use raw I/O function instead of forcing big endian access. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-02-25gpio: altera_pio: fix get_valueJulien Béraud
gpio_get_value should return 0 or 1, not the value of bit & (1 << pin) Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Julien Beraud <julien.beraud@orolia.com>
2019-02-01rockchip: Implement spl_gpio in the GPIO driverSimon Glass
Allow rockchip boards to use GPIOs before driver model is ready. This is really only useful for setting GPIOs to enable the early debug console, if needed on some platforms. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-28gpio: introduce CONFIG_SPL_DM_PCA953XPeng Fan
Introduce CONFIG_SPL_DM_PCA953X for SPL usage. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-16mips: gpio: mscc: Obsoleted gpio-mscc-bitbang-spi.cLars Povlsen
With the new mscc_bb_spi.c driver, there is no longer use for the gpio-mscc-bitbang-spi.c driver. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16mips: mscc_sgpio: Add the MSCC serial GPIO device (SIO)Lars Povlsen
This add support for the the MSCC serial GPIO driver in MSCC VCoreIII-based SOCs. By using a serial interface, the SIO controller significantly extends the number of available GPIOs with a minimum number of additional pins on the device. The primary purpose of the SIO controller is to connect control signals from SFP modules and to act as an LED controller. This adds the base driver. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-09gpio: stm32f7: Fix SPL code sizePatrice Chotard
In order to keep SPL code size below the 32Kb limit, put under CONFIG_SPL_BUILD flag all unused code in SPL. This is needed for stm32f7xx board which are using SPL. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-01-09gpio: stm32f7: Fix gpio bank hole managementPatrice Chotard
In case "gpio-ranges" property is not present in device tree, use default value for gpio_count and gpio_range. This fixes an issue on stm32 F7 and H7 boards where "pinmux status -a" command didn't return any pin status due to the fact that both stm32 F7 and H7 board DT doesn't use the gpio-ranges property. Fixes: dbf928dd2634a6("gpio: stm32f7: Add gpio bank holes management") Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-01-01Merge tag 'u-boot-imx-20190101' of git://www.denx.de/git/u-boot-imxTom Rini
imx for 2019.01 - introduce support for i.MX8M - fix size limit for Vhybrid / pico boards - several board fixes - w1 driver for MX2x / MX5x
2019-01-01imx: rename mx8m,MX8M to imx8m,IMX8MPeng Fan
Rename mx8m,MX8M to imx8m,IMX8M Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jon Nettleton <jon@solid-run.com>
2018-12-19gpio: mscc-bitbang-spi: Add a simple gpio driver for bitbgang spiGregory CLEMENT
The VCore III SoCs such as the Luton but also the Ocelot can remap an SPI flash directly in memory. However, for writing in the flash the communication has to be done by software. Each of the signal used for the SPI are exposed in a single register. In order to be able to use the soft-spi driver, the management of this pin is done through this simple gpio driver. Even if the main purpose of this driver is to be used by soft-spi, it can still be used as a normal gpio driver but with limitation: for example the first pin can't be used as output. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-07gpio: stm32f7: Remove CONFIG_CLK flag.Patrice Chotard
As all STM32 SoCs supports CONFIG_CLK flag, it becomes useless in this driver, remove it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-07gpio: stm32f7: Move STM32_GPIOS_PER_BANK into gpio.hPatrice Chotard
To allow access to this define by other driver, move it into gpio.h Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-07gpio: stm32f7: Add gpio bank holes managementPatrice Chotard
In some STM32 SoC packages, GPIO bank has not always 16 gpios. Several cases can occur, gpio hole can be located at the beginning, middle or end of the gpio bank or a combination of these 3 configurations. For that, gpio bindings offer the gpio-ranges DT property which described the gpio bank mapping. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-11-29gpio: dwapb_gpio: fix binding without bank-name propertySimon Goldschmidt
As a preparation for merging the socfpga gen5 devicetree files from Linux, this patch makes the dwapb gpio driver work correctly without the 'bank-name' property on the gpio-controller nodes. This property is not present in the Linux drivers and thus is not present in the Linux devicetrees. It is only used to access pins via bank name. This fallback is necessary since without it, the driver will return an error code which will lead to an error in U-Boot startup. The bank names will still be added to the default board device trees in follow-up patch, but other boards using this driver and not including the bank name should also work with the socfpga.dtsi without adding the bank-name property. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2018-11-18gpio: Add MT7621 GPIO supportStefan Roese
This patch adds GPIO support for the Mediatek MT7621 SoC, tested on MT7688 (Gardena smart-gateway). The driver is loosly based on the Linux kernel version. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> [fixed checkpatch.pl warnings: Prefer 'unsigned int' to bare use of 'unsigned'] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-29 11:01:52 +0000