summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)Author
2016-07-26i2c: mvtwsi: Make address length variablemario.six@gdsys.cc
The length of the address parameter of the __twsi_i2c_read and __twsi_i2c_write functions is fixed to four bytes. As a final step in the preparation of the DM conversion, we make the length of this parameter variable by turning it into an array of bytes, and convert the 32 bit value that's passed to the legacy functions into a four-byte-array on the fly. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2016-07-26i2c: mvtwsi: Factor out adap parametermario.six@gdsys.cc
To be able to use the compatibility layer from the DM functions, we factor the adap parameter out of all functions, and pass the actual register base instead. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2016-07-26i2c: mvtwsi: Add compatibility functionsmario.six@gdsys.cc
To prepare for the DM conversion, we add a layer of compatibility functions to be used by both the legacy and the DM functions. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2016-07-26i2c: mvtwsi: Use 'uint' instead of 'unsigned int'mario.six@gdsys.cc
Since some additional parameters will be added in the course of this patch series (especially with the addition of DM support), we replace the longer "unsigned int" declarations with "uint" declarations to keep the parameter lists more readable. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2016-07-26i2c: mvtwsi: Get rid of status parametermario.six@gdsys.cc
The twsi_stop function contains a parameter "status," which is used to pass in the current exit status of the function calling twsi_stop, and either return this status unchanged if it indicates an error, or return twsi_stop's exit status if it does not indicate an error. While not massively complicated, this adds another purpose to the twsi_stop function, which should have the sole purpose of asserting a STOP condition on the bus (and not manage the exit status of its caller). Therefore, we move the exit status management into the caller functions by introducing a "stop_status" variable and returning either the status before the twsi_stop call (kept in the "status" variable), or the status from the twsi_stop call, depending on which indicates an error. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2016-07-26i2c: mvtwsi: Eliminate flags parametermario.six@gdsys.cc
Due to breaking boots from NOR flashes, commit d6b7757 ("i2c: mvtwsi: Eliminate twsi_control_flags") removed the static global twsi_control_flags variable, which kept a set of default flags that were always or'd to the control register when writing. It was replaced with a flags parameter, which was passed around between the functions that needed it. Since the twsi_control_flags variable was used just for the purposes of a) setting the MVTWSI_CONTROL_TWSIEN on every control register write, and b) setting the MVTWSI_CONTROL_ACK from twsi_i2c_read if needed, anyway, the added overhead of another variable being passed around is no longer justified, and we are better off implementing this flag setting logic locally in the functions that actually write to the control register. Therefore, this patch sets MVTWSI_CONTROL_TWSIEN on every control register write, replaces the twsi_i2c_read's flags parameter with a ack_flag parameter, which tells the function whether to acknowledge the read or not, and removes every other instance of the flags variable. This has the added benefit that now every notion of "global default flags" is gone, and it's much easier to see which control flags are actually set at which point in time. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2016-07-26i2c: mvtwsi: Improve and fix commentsmario.six@gdsys.cc
This patch fixes only comments/documentation: Streamline capitalization and improve grammar/punctuation. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2016-07-26i2c: mvtwsi: Streamline code and add documentationmario.six@gdsys.cc
Convert groups of logically connected preprocessor defines into proper enums, one macro into an inline function, and add documentation to/extend existing documentation of these items. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2016-07-26i2c: mvtwsi: Fix style violationsmario.six@gdsys.cc
This patch fixes seven style violations: Six superfluous spaces after casts, and one logical continuation violation. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2016-07-26drivers: i2c: omap24xx_i2c: adopt omap_i2c driver to driver modelMugunthan V N
Convert omap i2c driver to adopt i2c driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-26drivers: i2c: omap24xx_i2c: prepare driver for DM conversionMugunthan V N
Prepare the driver for DM conversion. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-26drivers: i2c: uclass: parse dt parameters only when CONFIG_OF_CONTROL is enableMugunthan V N
parse dt parameter of i2c devices only when CONFIG_OF_CONTROL is enabled. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-24ARM: uniphier: use (devm_)ioremap() instead of map_sysmem()Masahiro Yamada
This does not have much impact on behavior, but makes code look more more like Linux. The use of devm_ioremap() often helps to delete .remove callbacks entirely. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-19clk: convert API to match reset/mailbox styleStephen Warren
The following changes are made to the clock API: * The concept of "clocks" and "peripheral clocks" are unified; each clock provider now implements a single set of clocks. This provides a simpler conceptual interface to clients, and better aligns with device tree clock bindings. * Clocks are now identified with a single "struct clk", rather than requiring clients to store the clock provider device and clock identity values separately. For simple clock consumers, this isolates clients from internal details of the clock API. * clk.h is split so it only contains the client/consumer API, whereas clk-uclass.h contains the provider API. This aligns with the recently added reset and mailbox APIs. * clk_ops .of_xlate(), .request(), and .free() are added so providers can customize these operations if needed. This also aligns with the recently added reset and mailbox APIs. * clk_disable() is added. * All users of the current clock APIs are updated. * Sandbox clock tests are updated to exercise clock lookup via DT, and clock enable/disable. * rkclk_get_clk() is removed and replaced with standard APIs. Buildman shows no clock-related errors for any board for which buildman can download a toolchain. test/py passes for sandbox (which invokes the dm clk test amongst others). Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-06-10drivers: i2c: mxc: Add early initYuan Yao
Add early i2c init function with conservative divider when the exact clock rate is not available. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-17i2c: mvtwsi: Eliminate twsi_control_flagsChris Packham
In a system where the initial u-boot location is genuinely NOR flash (as opposed to RAM or a cache-line setup by a pre-bootloader) writes to the data section are problematic. At best these writes have no effect, at worst they put the flash memory into a status mode which changes the executable code underneath us. Pass around a stack variable from the top of the twsi i2c driver to avoid writing to global data. Signed-off-by: Chris Packham <judge.packham@gmail.com>
2016-05-17i2c: Select SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED for SPEArStefan Roese
The DW I2C controller in the SPEAr SoCs doesn't support the enable status register check. This patch selects SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED for these boards. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de>
2016-05-17i2c: Add entry for Designware I2C driver in KconfigStefan Roese
This patch adds an entry for the Designware I2C driver in Kconfig. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-05-17dm: fsl_i2c: Enable DM for FSL I2Cmario.six@gdsys.cc
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-05-17dm: fsl_i2c: Factor out adap parametermario.six@gdsys.cc
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-05-17dm: fsl_i2c: Prepare compatibility functionsmario.six@gdsys.cc
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-05-17dm: fsl_i2c: Rename methods for reading/writing datamario.six@gdsys.cc
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-05-17dm: fsl_i2c: Rename probe methodmario.six@gdsys.cc
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-05-17dm: fsl_i2c: Remove unnecessary variablemario.six@gdsys.cc
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-05-17dm: fsl_i2c: Reword and clarify commentmario.six@gdsys.cc
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-05-17dm: fsl_i2c: Use clearer parameter namesmario.six@gdsys.cc
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-05-17dm: fsl_i2c: Rename I2C register structuremario.six@gdsys.cc
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-05-17i2c: designware_i2c: Optionally check enable status registerStefan Roese
Some platforms don't implement the enable status register at offset 0x9c. The SPEAr600 platform is one of them. The recently added check to this status register can't be performend on these platforms. This patch introduces a new config option that can be enabled on such platforms not supporting this register. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2016-05-17i2c: muxes: Add support for TI PCA954X muxMichal Simek
Add support for common TI i2c mux which is available on ZynqMP zcu102 board. DM i2c mux core code is selecting/deselecting bus before/after every command is performed that's why only one channel is active at a time. That's also the reason why deselect is just disable all available channels. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-17i2c: cdns: Support different bus speedsMichal Simek
400kHz is maximum freq which can be used on Xilinx ZynqMP. Support it with standard divider calculator. Input freq is hardcoded to 100MHz input freq till we have clock driver which can provide this information for exact configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2016-05-17i2c: cdns: Moving speed setup from probe to set_bus_speed functionMichal Simek
set_bus_speed is the right function where bus speed should be setup. This move enable option to remove probe and remove functions which are empty. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-17i2c: cdns: Read address from DT in ofdata_to_platdataMichal Simek
Extract reading IP base address in function which is designed for it. Also enable option to read more information from DT in this function. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2016-05-02Fix spelling of "occurred".Vagrant Cascadian
Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-25i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)Stefan Roese
This patch adds support for the PCI(e) based I2C cores. Which can be found for example on the Intel Bay Trail SoC. It has 7 I2C controllers implemented as PCI devices. This patch also adds the fixed values for the timing registers for BayTrail which are taken from the Linux designware I2C driver. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-04-25i2c: designware_i2c: Add DM supportStefan Roese
This patch adds DM support to the designware I2C driver. It currently supports DM and the legacy I2C support. The legacy support should be removed, once all platforms using it have DM enabled. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de>
2016-04-25i2c: designware_i2c: Prepare for DM driver conversionStefan Roese
This patch prepares the designware I2C driver for the DM conversion. This is mainly done by removing struct i2c_adapter from the functions that shall be used by the DM driver version as well. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de>
2016-04-25i2c: designware_i2c: Integrate set_speed() into dw_i2c_set_bus_speed()Stefan Roese
Integrating set_speed() into dw_i2c_set_bus_speed() will make the conversion to DM easier for this driver. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de>
2016-04-25i2c: designware_i2c: Add dw_i2c_enable() helper functionStefan Roese
dw_i2c_enable() is used to dis-/en-able the I2C controller. It makes sense to add such a function, as the controller is dis-/en-abled multiple times in the code. Additionally, this function now checks, if the controller is really dis-/en-abled. This code is copied from the Linux I2C driver version. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-04-25i2c: designware_i2c: Add ic_enable_status to ic_regs structStefan Roese
Add the ic_enable_status register to the i2c_regs struct. Additionally the register offsets are added, to better check, if the offset matches the register description in the datasheet. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de>
2016-04-13dm: i2c: Add driver for Cadence I2C IPMoritz Fischer
This is a possible drop in replacement for drivers/i2c/zynq-i2c.c Since this is cadence IP it has been renamed to cdns-i2c, to make sense with the compatible string. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-01i2c: uniphier: use devm_get_addr() to get base addressMasahiro Yamada
Currently, fdtdec_get_addr_size() does not support the address translation, so it cannot handle device trees with non-straight "ranges" properties. (This would be a problem with DTS for UniPhier ARMv8 SoCs.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-28omap24xx_i2c: Implement CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOWGuy Thouret
Signed-off-by: Guy Thouret <guy.thouret@wems.co.uk> Cc: Heiko Schocher <hs@denx.de>
2016-03-28dm: i2c: mxc_i2c: implement i2c_idle_busPeng Fan
Implement i2c_idle_bus in driver, then setup_i2c can be dropped for boards which enable DM_I2C/DM_GPIO/PINCTRL. The i2c_idle_bus force bus idle flow follows setup_i2c in arch/arm/imx-common/i2c-mxv7.c This patch is an implementation following linux kernel patch: " commit 1c4b6c3bcf30d0804db0d0647d8ebeb862c6f7e5 Author: Gao Pan <b54642@freescale.com> Date: Fri Oct 23 20:28:54 2015 +0800 i2c: imx: implement bus recovery Implement bus recovery methods for i2c-imx so we can recover from situations where SCL/SDA are stuck low. Once i2c bus SCL/SDA are stuck low during transfer, config the i2c pinctrl to gpio mode by calling pinctrl sleep set function, and then use GPIO to emulate the i2c protocol to send nine dummy clock to recover i2c device. After recovery, set i2c pinctrl to default group setting. " See Documentation/devicetree/bindings/i2c/i2c-imx.txt for detailed description. 1. Introuduce scl_gpio/sda_gpio/bus in mxc_i2c_bus. 2. Discard the __weak attribute for i2c_idle_bus and implement it, since we have pinctrl driver/driver model gpio driver. We can use device tree, but not let board code to do this. 3. gpio state for mxc_i2c is not a must, but it is recommended. If there is no gpio state, driver will give tips, but not fail. 4. The i2c controller was first probed, default pinctrl state will be used, so when need to use gpio function, need to do "pinctrl_select_state(dev, "gpio")" and after force bus idle, need to switch back "pinctrl_select_state(dev, "default")". This is example about how to use the gpio force bus idle function: " &i2c1 { clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; status = "okay"; [....] }; [.....] pinctrl_i2c1_gpio: i2c1grp_gpio { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0 MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0 >; }; " Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: York Sun <york.sun@nxp.com>
2016-01-26mvtwsi: Fix breakage introduced by "Fix mvtwsi not working on sun6i and ↵Hans de Goede
newer sunxi SoCs" "Fix mvtwsi not working on sun6i and newer sunxi SoCs" includes the following: @@ -189,7 +200,8 @@ static int twsi_start(struct i2c_adapter *adap, int expected_status) /* globally set TWSIEN in case it was not */ twsi_control_flags |= MVTWSI_CONTROL_TWSIEN; /* assert START */ - writel(twsi_control_flags | MVTWSI_CONTROL_START, &twsi->control); + twsi_control_flags |= MVTWSI_CONTROL_START | MVTWSI_CONTROL_CLEAR_IFLG; + writel(twsi_control_flags, &twsi->control); /* wait for controller to process START */ return twsi_wait(adap, expected_status); } The modification of twsi_control_flags done here was introduced while merging to fix a line > 80 chars, but twsi_control_flags is a global variable and should not be modified like this here, this commit fixes this, restoring mvtwsi functionality. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-24x86: ivybridge: Use the I2C driver to perform SMbus initSimon Glass
Move the init code into the I2C driver. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24x86: i2c: Add a stub driver for Intel I2C/SMbusSimon Glass
This is used on most Intel platforms. We don't have a driver for it yet, but add a stub to handle the init. For now this targets ivybridge so we may want to add a device tree binding and generalise it when other platforms are supported. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-21dm: i2c: Allow muxes to be enabled for SPL separatelySimon Glass
Since I2C muxes are seldom needed in SPL, and the code for this increases the size somewhat, add a separate option to enable I2C muxes for SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: i2c: Update the driver to use the new clock IDSimon Glass
We can use the new clk_get_by_index() function to get the correct clock. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21sunxi: Add support for the I2C controller which is part of the PRCMJelle van der Waa
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: Minor cleanups] Signed-off-by: Hans de Goede <hdegoede@redhat.com> applied with fixing 2 checkpatch warnings: WARNING: please, no space before tabs Signed-off-by: Heiko Schocher <hs@denx.de>
2016-01-21i2c: mvtwsi: Fix mvtwsi not working on sun6i and newer sunxi SoCsHans de Goede
On sun6i and newer IFLG is a write-clear bit which is cleared by writing 1, rather then a normal r/w bit which is cleared by writing 0. Signed-off-by: Hans de Goede <hdegoede@redhat.com> applied with fixing 3 checkpatch warnings in drivers/i2c/mvtwsi.c: WARNING: line over 80 characters ERROR: code indent should use tabs where possible WARNING: please, no spaces at the start of a line Signed-off-by: Heiko Schocher <hs@denx.de>
generated by cgit (git 2.34.1) at 2024-12-28 22:36:56 +0000