summaryrefslogtreecommitdiff
path: root/drivers/misc
AgeCommit message (Collapse)Author
2019-04-13configs: move CONFIG_MXC_OCOTP to KconfigMarcel Ziswiler
While commit 3e020f03e94f ("driver: misc: add MXC_OCOTP Kconfig entry") introduced a Kconfig entry it did not actually migrate all configurations to using it. As CONFIG_MXC_OCOTP was in mx{6/7}_common.h enable it by default on those architectures. Additionally, also enable it on ARCH_IMX8M and ARCH_VF610 where all current members enabled it through their legacy configuration header files. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-12Merge tag 'u-boot-stm32-20190412' of https://github.com/patrickdelaunay/u-bootTom Rini
stm32 patches for v2019.07-rc1 - Add trusted boot with TF-A for stm32mp1 - stm32mp1 dts files sync'ed with Linux version - add STM32MP1 Discovery boards (DK1 and DK2) - add STMFX gpio expander driver - misc improvement for stm3mp1 supports - rename stpmu1 to stpmic1 (official name) - stm32_qspi: move to exec_op (spi nor driver for stm32 mpu and mcu) - add STM32 FMC2 NAND flash controller driver
2019-04-12stpmic1: add NVM update support in fuse commandPatrick Delaunay
Add functions to read/update the non volatile memory of STPMIC1 (8 bytes-register at 0xF8 address) and allow access with fuse command (bank=1, word > 0xF8). For example: STM32MP> fuse read 1 0xf8 8 Reading bank 1: Word 0x000000f8: 000000ee 00000092 000000c0 00000002 Word 0x000000fc: 000000f2 00000080 00000002 00000033 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-11misc: i2c_eeprom: add eeprom write supportBaruch Siach
Write up to page size in each i2c transfer. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-04-11misc: i2c_eeprom: support DT pagesize propertyBaruch Siach
Read the page size from DT when available. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-02-14xilinx: common: Remove !DM_i2C code for reading mac from eepromMichal Simek
All platforms are converted to DM_I2C that's why there is no reason to keep this code here. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-02-09misc: Allow child devicesSimon Glass
Allow misc devices to have children, so that we can use this uclass for cases where a child device (e.g. I2S) needs to access a misc driver for transferring data. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-01-30Merge tag 'u-boot-imx-20190129' of git://git.denx.de/u-boot-imxTom Rini
For 2019.04
2019-01-28imx8: scu: use dedicated MU for SPLPeng Fan
SPL runs in EL3 mode, except MU0_A, others are not powered on, and could not be used. However normal U-Boot use MU1_A, so we could not reuse the one in dts. And we could not replace the one in dts with MU0_A, because MU0_A is reserved in secure world. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-26misc: i2c_eeprom: Add atmel,24c08 to the listMichal Simek
Linux kernel binding is using atmel,24c08 compatible string. On the other hand there is atmel,24c08a which is not listed in the kernel. Add compatible string without "a" suffix to be compatible with Linux kernel binding. These eeproms are available on several ZynqMP development boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-18Merge tag 'fsl-qoriq-for-v2019.04-rc1' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
Add TFA boot flow for more boards Add TFA boot defconfig for ls1088a and ls2088a. Add dts fixup for PCIe endpoint and root complex.
2019-01-17drivers: ifc: restore the legacy flow for IFC configRajesh Bhagat
Restore the legacy flow along with TFABOOT flow for IFC configuration. Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-15misc: fs_loader: Switching private data allocation to DM auto allocationTien Fong Chee
Switching private data manual allocation to driver model auto allocation so users no longer need to deallocate themself because this would be deallocated by driver model when the device is no longer required. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-09misc: imx8: scu: use platdata instead of priv dataPeng Fan
priv data has not been allocated when doing bind, so it is wrong to use dev_get_priv in bind call back. Let's switch to use platdata in the driver to fix the issue. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-09misc: imx: scu: avoid write null pointerPeng Fan
When boot_dev is true, fill boot device. However the original logic is when boot_dev is false, fill boot device, this will trigger data abort. Also fix sc_misc_get_control when using pointer val. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01Merge tag 'u-boot-imx-20190101' of git://www.denx.de/git/u-boot-imxTom Rini
imx for 2019.01 - introduce support for i.MX8M - fix size limit for Vhybrid / pico boards - several board fixes - w1 driver for MX2x / MX5x
2019-01-01imx: rename mx8m,MX8M to imx8m,IMX8MPeng Fan
Rename mx8m,MX8M to imx8m,IMX8M Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jon Nettleton <jon@solid-run.com>
2018-12-19misc: Add JZ47xx efuse driverPaul Burton
Add driver for the efuse block in the JZ47xx SOC. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-10Merge tag 'fsl-qoriq-for-v2019.01-rc2' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
Add TFA boot flow for some Layerscape platforms Add support for lx2160a SoC [trini: Add a bunch of missing MAINTAINERS entries] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-06drivers: ifc: dynamic chipselect mapping supportPankit Garg
IFC driver changes to implement the chipselect mappings at run time. Defines init_early_memctl_regs and init_final_memctl_regs with chipselect dynamic mapping for nor and nand boot. Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> [YS: fix checkpatch issues] Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-05cros_ec: Adjust to use v1 vboot context onlySimon Glass
At present there are no users of the 64-byte v2 context. The v1 context is only 16 bytes long and currently an error is raised if too much data is returned from the EC. Update the code to limit the size to 16 bytes. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-05cros: Correct a printf() string and commentSimon Glass
Correct a warning that occurs on sandbox. Also fix the comment style in cros_ec_set_lid_shutdown_mask(). Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20misc: Update read() and write() methods to return bytes xferedSimon Glass
At present these functions return 0 on success. For some devices we want to know how many bytes were transferred. It seems useful to adjust the API to be more like the POSIX read() and write() functions. Update these two methods, a test and all users. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-11-20cros_ec: Add new features for events and powerSimon Glass
This adds new commands to the EC related to setting and clearing events as well as controlling power-related settings. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20cros_ec: Align uclass data to a cache boundarySimon Glass
The LPC driver expects its buffer to be word-aligned. Add the required flag to the uclass driver to ensure this. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20cros_ec: Fail if we cannot determine the flash burst sizeSimon Glass
This value is required for flashing to work correctly. Add a check for it. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20cros_ec: Add error logging on a few commandsSimon Glass
Add some more logging to provide more information on failures. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20cros_ec: Use uint instead of u8 for parametersSimon Glass
There is no advantage to using a u8 for function parameters. It forces the compiler to mask values and can increase code size. Also the command enum has been extended to 16 bits. Update the functions to use uint instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16misc: fs_loader: Fix compiler warningKeerthy
Fix compiler warning drivers/misc/fs_loader.c:193:9: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘size_t {aka long unsigned int}’ [-Wformat=] Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-16misc: fs_loader: Use device_get_global_by_ofnode to get to nodeKeerthy
Instead of two staged ofnode_to_offset followed by device_get_global_by_of_offset approach, direcly use the device_get_global_by_ofnode to fetch the device. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14test: dm: pci: Add cases for finding next PCI capability APIsBin Meng
Add test cases to cover the two newly added PCI APIs: dm_pci_find_next_capability() & dm_pci_find_next_ext_capability(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14misc: Add IHS FPGA driverMario Six
Add a driver for gdsys IHS (Integrated Hardware Systems) FPGAs, which supports initialization of the FPGA, as well as information gathering. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-11-14misc: Add gdsys_soc driverMario Six
This patch adds a driver for the bus associated with a IHS FPGA. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-11-14misc: Sort Makefile entriesMario Six
Makefile entries should be sorted. Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2018-11-14dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()Bin Meng
Currently the comments of several APIs (eg: dm_init_and_scan()) say: @pre_reloc_only: If true, bind only drivers with the DM_FLAG_PRE_RELOC flag. If false bind all drivers. The 'Pre-Relocation Support' chapter in doc/driver-model/README.txt documents the same that both device tree properties and driver flag are supported. However the implementation only checks these special device tree properties without checking the driver flag at all. This updates lists_bind_fdt() to consider both scenarios. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Squashed in http://patchwork.ozlabs.org/patch/996473/ : Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-28drivers: cosmetic: Convert SPDX license tags to Linux Kernel stylePatrick Delaunay
Complete in the drivers directory the work started with commit 83d290c56fab ("SPDX: Convert all of our single license tags to Linux Kernel style"). Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-25Merge tag 'u-boot-imx-20181025' of git://git.denx.de/u-boot-imxTom Rini
Merged imx8 architecture, fix build for imx8 + warnings
2018-10-22misc: imx8: add scfw api impementationPeng Fan
Add clk/misc/pad/pm/rm scfw api implementaion for different drivers to invoke. The low level code is using misc_call to invoke imx8_scu driver. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22misc: add i.MX8 misc driverPeng Fan
Add i.MX8 MISC driver to handle the communication between A35 Core and SCU. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-09cros_ec: Add support for v3 messages on LPCSimon Glass
At present version 3 messages are only supported on SPI. Add support for using LPC as well, as used on samus. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09cros_ec: Update cros_ec_read_hash() to specify the imageSimon Glass
Allow selection of which EC image to hash. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09cros: Update ec_commands to latest versionSimon Glass
This file has changed quite a bit in the last 5 years as the capabilities of the ECs have grown. Sync it up with the copy in coreboot commit b9141f2215. The only change is the addition of EC_VBNV_BLOCK_SIZE_V2. This is needed because U-Boot uses the new v2 vboot API and this is not currently fully supported by Chromium OS firmware. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09cros: Update cros_ec code to use struct udeviceSimon Glass
At present we pass around a private pointer to specify the cros_ec device. With driver model it makes more sense to pass the device. Update the code to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09dm: core: Update ofnode to read binman-style flash entrySimon Glass
At present ofnode_read_fmap_entry() reads a flash map entry in a format which is not supported by binman. To allow use to use binman-format descriptions, update this function. Also add a simple test. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-06misc: Add support for the Arm Versatile Express config busLiviu Dudau
Add support for the Arm Versatile Express config bus that is being used for exposing various subsystems via a generic configuration bus. This driver adds support for generating transactions on this configuration bus and can be used by other drivers to abstract the communication with the actual function providers. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-09-29Merge tag 'fsl-qoriq-for-v2018.11-rc1' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
Switch to driver model for eSDHC on Layerscape SoCs including LS1021A, LS1043A, LS1046A, LS1088A, LS2088A. Switch to driver model for SATA on LS1021A and LS1043A. Add support for LS1012AFRWY rev C board. Enable SMMU for LS1043A.
2018-09-28common: Generic loader for file systemTien Fong Chee
This is file system generic loader which can be used to load the file image from the storage into target such as memory. The consumer driver would then use this loader to program whatever, ie. the FPGA device. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2018-09-27armv8: ls1043a: enable icid setup for qman portalsLaurentiu Tudor
Enable support for ICID setup of qman portals and the required device tree fixups. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-18misc: Add MPC83xx serdes driverMario Six
Add a driver to configure the SerDes (Serializer/Deserializer) lanes on the MPC83xx architecture. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-08-17Convert CONFIG_TWL4030_LED et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_TWL4030_LED CONFIG_TWL4030_INPUT This also removes dead references to: CONFIG_TWL4030_KEYPAD Signed-off-by: Adam Ford <aford173@gmail.com>
generated by cgit (git 2.34.1) at 2025-01-02 16:20:56 +0000