summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2015-10-22drivers: mmc: omap_hsmmc: convert driver to adopt device driver modelMugunthan V N
adopt omap_hsmmc driver to device driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2015-10-22ARM: k2g: add SD card and eMMC supportRoger Quadros
Add MMC support for k2g Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
2015-10-20Merge git://git.denx.de/u-boot-marvellTom Rini
2015-10-21mmc: mv_sdhci: Configure the SDHCI MBUS bridge windowsStefan Roese
This driver did not yet configure the SDHCI MBUS bridge registers. Without this and with CONFIG_MMC_SDMA enabled, mmc hangs at random times. As DMA cannot complete correctly. Tested on db-88f6820-gp eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Dirk Eibach <eibach@gdsys.cc> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com>
2015-10-20sunxi: Use Kconfig CONFIG_MMCMaxime Ripard
Not all sunxi boards have an MMC embedded. Switching to the Kconfig option will allow to enable or disable the support in each boards' defconfig. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-20mmc: Add generic Kconfig optionMaxime Ripard
Add a generic Kconfig option for the CONFIG_MMC option that was used before in the configuration headers. Since all the architectures need to be converted to that first, depend on an non-existent config option that will be extended with architectures that use that option. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-13exynos: more debug and cleanup in do_sdhci_init()Tobias Jakobi
Add more debug printfs in do_sdhci_init() for calls that can potentially fail. Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-13exynos: be more verbose in process_nodes()Tobias Jakobi
In case sdhci_get_config() or do_sdhci_init() fail, show the error code that was returned. Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-13exynos: Fix passing of errors in exynos_mmc_init()Tobias Jakobi
exynos_mmc_init() always returns zero, so for the caller it looks like it never fails. Correct this by returning the error code of process_nodes(). For process_nodes() do something similar and return early when do_sdhci_init() fails. v2: Only fail in process_nodes() if we fail on all available nodes. Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-13exynos: Properly zero initialize host in s5p_sdhci_init()Tobias Jakobi
This makes sure that setting the host_caps in s5p_sdhci_core_init() doesn't operate on potentially uninitialized memory. Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-09-29sunxi: mmc: Fix clk-delay settingsHans de Goede
In recent allwinner kernel sources the mmc/sdio clk-delay settings have been slightly tweaked, and for sun9i they are completely different then what we are using. This commit brings us in sync with what allwinner does, fixing problems accessing sdcards on some A33 devices (and likely others). For pre sun9i hardware this makes the following changes: -At 400Khz change the sample delay from 7 to 0 (first introduced in A31 sdk) -At 50 Mhz change the sample delay from 5 to 4 (first introduced in A23 sdk) -Above 50 MHz change the out delay from 2 to 1 (first introduced in A20 sdk) Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-09-28mmc: dw_mmc: Increase timeout to 4 minutes (as in Linux kernel)Łukasz Majewski
The commit: d9dbb97be0e4a550457aec5f11afefb446169c90 "mmc: dw_mmc: Zap endless timeout" removed endless loop waiting for end of dw mmc transfer. For some workloads - dfu test @ Odroid XU3 (sending 8MiB file) - and SD cards (e.g. MicroSD Kingston 4GiB, Adata 4GiB) the default timeout is to short. The new value - 4 minutes (240 seconds) - is the same as the one used in Linux kernel driver. Such fix should be good enough until we come up with better fix for this issue. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-09-11Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h headerSimon Glass
Now that we have a new header file for cache-aligned allocation, we should move the stack-based allocation macro there also. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-04mmc: dw_mmc: Probe the MMC from OFMarek Vasut
Rework the driver to probe the MMC controller from Device Tree and make it mandatory. There is no longer support for probing from the ancient qts-generated header files. This patch now also removes previous temporary workaround. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com>
2015-09-02mmc: Probe DM based mmc devices in u-bootSjoerd Simons
During mmc initialize probe all devices with the MMC Uclass if build with CONFIG_DM_MMC Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02rockchip: Add an MMC driverSimon Glass
Add an MMC driver which supports RK3288, but may also support other SoCs. It uses the Designware MMC device. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02mmc: Support bypass mode with the get_mmc_clk() methodSimon Glass
Some SoCs want to adjust the input clock to the DWMMC block as a way of controlling the MMC bus clock. Update the get_mmc_clk() method to support this. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-08-31sunxi: mmc: set transfer timeout according to byte_cnt.Yousong Zhou
Originally a timeout value of 2 seconds was used regardless of the size of data to be transfered. This prevented slow devices from working correctly while there was no much gain for faster devices, e.g. it takes 3708ms for a transfer of uImage of size 1899008 bytes. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-08-24arm: pxa: mmc: clean-up include file orderMarcel Ziswiler
Cleaning up order of include files by sorting them alphabetically keeping in mind to leave common.h on top. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-08-18of: clean up OF_CONTROL ifdef conditionalsMasahiro Yamada
We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear away the ugly logic in include/fdtdec.h: #ifdef CONFIG_OF_CONTROL # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL) # define OF_CONTROL 0 # else # define OF_CONTROL 1 # endif #else # define OF_CONTROL 0 #endif Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute. It refers to CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for SPL. Also, we no longer have to cancel CONFIG_OF_CONTROL in include/config_uncmd_spl.h and scripts/Makefile.spl. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-13Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini
2015-08-13mmc_spi: Big-endian supportYoshinori Sato
Currently implement always swap for big-endian value. So doesn't work big-endian environment. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2015-08-13dw_mmc: Calculate dwmmc FIFO threshold size if not providedSimon Glass
We can calculate this. Add code to do this if it is not provided. panto: prefix changed to dw_mmc to make things easier to grep Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-08-12mmc: omap_hsmmc: enable 8bit interface for eMMC for AM43xxNikita Kiryanov
Enable 8bit interface on HSMMC2 for am43xx to support 8bit eMMC chips. Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2015-08-12mmc: omap_hsmmc: enable proper CMD(DAT) lines reset procedure for am43xxNikita Kiryanov
The CMD(DAT) lines reset procedure described in the OMAP4(AM335x, OMAP5, DRA7xx) TRMs is also necessary for AM43XX. Enable it in the driver. Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2015-08-12mmc: hi6220_dw_mmc: Add hi6220 glue code for dw_mmc controller.Peter Griffin
This patch adds the glue code for hi6220 SoC which has 2x synopsis dw_mmc controllers. This will be used by the hikey board support in subsequent patches. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-11mmc: dw_mmc: Avoid using printf() for errorsSimon Glass
The dw_mmc driver uses printf() in various places. These bloat the code and cause problems for SPL. Use debug() where possible and try to return a useful error code instead. panto: Small rework to make it apply against top of tree. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-08-11mmc: dw_mmc: Improve handling of data transfer failureMarek Vasut
In case the data transfer failure happens, instead of returning immediatelly, make sure the DMA is disabled, status register is cleared and the bounce buffer is stopped. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com>
2015-08-11mmc: dw_mmc: Zap endless timeoutMarek Vasut
Endless timeouts are bad, since if we get stuck in one, we have no way out. Zap this one by implementing proper timeout. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com>
2015-08-11mmc: dw_mmc: Stop bounce buffer even in case of failureMarek Vasut
The driver didn't stop the bounce buffer in case a data transfer failed. This would lead to memory leakage if the communication between the CPU and the card is unreliable. Add the missing call to stop the bounce buffer. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com>
2015-08-05exynos: Correct return value in exynos_mmc_init()Simon Glass
This function should return 0 on success, not 1. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-02fsl_esdhc.c: Always make check_and_invalidate_dcache_range availableTom Rini
This function is called from esdhc_send_cmd so we need it available to everyone. Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-02Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2015-07-28ARM: Tegra210: Add support to common Tegra source/config filesTom Warren
Derived from Tegra124, modified as appropriate during T210 board bringup. Cleaned up debug statements to conserve string space, too. This also adds misc 64-bit changes from Thierry Reding/Stephen Warren. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2015-07-27mmc: tegra: Build warning fixes for 64-bitThierry Reding
Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-07-26mmc:fsl_esdhc invalidate dcache before readPeng Fan
DCIMVAC is upgraded to DCCIMVAC for the individual processor (Cortex-A7) that the DCIMVAC is executed on. We should follow the linux dma follow. Before DMA read, first invalidate dcache then after DMA read, invalidate dcache again. With the DMA direction DMA_FROM_DEVICE, the dcache need be invalidated again after the DMA completion. The reason is that we need explicity make sure the dcache been invalidated thus to get the DMA'ed memory correctly from the physical memory. Any cache-line fill during the DMA operations such as the pre-fetching can cause the DMA coherency issue, thus CPU get the stale data. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2015-07-24sunxi: Create helper function veryfing valid boot signature on MMCDaniel Kochmański
This patch extracts checking for valid SD card "eGON.BT0" signature from `board_mmc_init` into function `sunxi_mmc_has_egon_boot_signature`. Buffer for mmc sector is allocated and freed at runtime. `panic` is triggered on malloc failure. Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> CC: Roy Spliet <r.spliet@ultimaker.com> Cc: Ian Campbell <ijc@hellion.org.uk> [hdegoede@redhat.com: Small bugfix to make it work for devs other then mmc0] Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-24mmc: Protect `mmc_initialize` from initialising mmc multiple timesDaniel Kochmański
`mmc_initialize` might be called multiple times leading to the mmc-controllers being initialised twice, and initialising the `mmc_devices` list head twice which may lead to memory leaks. Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> CC: Roy Spliet <r.spliet@ultimaker.com> Cc: Ian Campbell <ijc@hellion.org.uk> CC: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-21dm: test: Add a test for the mmc uclassSimon Glass
Add a test to confirm that we can probe this device. Since there is no MMC stack support in sandbox at present, this is as far as the test goes. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21mmc: Add debug() output on read errorsSimon Glass
Allow read errors to be diagnosed more easily. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21dm: mmc: Add an MMC uclassSimon Glass
Add basic support for MMC, providing a uclass which can set up an MMC device. This allows MMC drivers to move to using driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-10mmc: sdhci.c: Add config option to use a fixed buffer for transfersStefan Roese
While implementing SDIO/MMC SPL booting for the Marvell Armada 38x, the following problem occured. The SPL runs in internal SRAM which is the L2 cache locked to memory. When the MMC buffers now are located on the stack (or bss), the SDIO controller (SDHCI) can't write into this L2 cache memory. This patch introduces a method to use a fixed buffer that will be used for all transfers by defining CONFIG_FIXED_SDHCI_ALIGNED_BUFFER. This way, the board can use this buffer address located in SDRAM for all transfers. This solves this SPL problem on the A38x and should only be used in the SPL U-Boot version. Tested for SPL booting on Marvell Armada 38x DB-88F6820-GP board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-10mmc: sdhci: Use timer based timeout detection in sdhci_send_command()Stefan Roese
The loop counter based timeout detection does not work on the Armada 38x based board (DB-88F6820-GP). At least with dcache enabled a timeout is detected. Without dcache enabled, the timeout does not occur. Increasing the loop counter solves this issue. But a better solution is to use a timer based timeout detection instead. This patch now implements this timer based detection. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-06-25mmc: bcm2835_sdhci: Restore original delay behaviorMarek Vasut
Patch 33fe2fb8df01647f97a7bce96a1c7781a7f6d253 titled "mmc: bcm283x: Remove get_timer_us() from mmc driver" incorrectly replaced ad-hoc get_timer_us() function with a plain get_timer(). The get_timer() operates in mSec units instead of uSec though, which caused very slow operation of the driver. Restore the original behavior of the driver, but avoid get_timer_us() and use timer_get_us() instead. The later is part of the standard API. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jakub Kiciński <moorray3@wp.pl> Cc: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Jakub Kicinski <kubakici@wp.pl>
2015-06-18mmc_write.c: Make mmc_berase do 32bit safe 64bit mathTom Rini
We want to see if the requested start or total block count are unaligned. We discard the whole numbers and only care about the remainder. Update the code to use div_u64_rem here and add a comment. Cc: Hans de Goede <hdegoede@redhat.com> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Bernhard Nortmann <bernhard.nortmann@web.de> Reported-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Tested-by: Bernhard Nortmann <bernhard.nortmann@web.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2015-06-04sunxi: mmc: Enable pull-up on card-detect gpio pinHans de Goede
On some boards we need to enable the internal pull-up te reliable detect that no card is inserted. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-05Merge git://git.denx.de/u-boot-mpc85xxTom Rini
2015-05-05Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini
2015-05-05ARM: mmc: bcm283x: Remove get_timer_us() from mmc driverMarek Vasut
The get_timer_us() function is something which is no longer existing in case we use generic timer framework, so replace it with get_timer(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Tyler Baker <tyler.baker@linaro.org>
2015-05-05tegra: mmc: Set the removable flag correctlySimon Glass
If the mmc device is non-removable (as indicated by the device tree), set the flag so that users of the device know. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit (git 2.34.1) at 2024-12-26 14:21:34 +0000