summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2019-07-12mtd: rawnand: stm32_fmc2: avoid warnings when building with W=1 optionPatrick Delaunay
This patch solves warnings detected by setting W=1 when building. Warnings type detected: - [-Wsign-compare] - [-Wtype-limits] Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-09ubispl: introduce separate CONFIG_UBI_SPL_SILENCE_MSGMarkus Klotzbuecher
This allows to silence ubi and ubispl individually. Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org>
2019-07-09ubispl: add support for loading volumes by nameHamish Guthrie
The motivation is to use the UBI atomic volume rename functionality to allow double copy software updates on UBI. To that end the SPL is configured to always load the same volume name (e.g. "u-boot"), whereas a software updater always installs into the secondary volume "u-boot_r". After successful installation, these two volume names are switched. This extension is protected by #ifdefs as it will somewhat slow down loading of volumes by id. This is because the code needs to disable the optimization of ignoring all volume ids which are not to-be-loaded, since these can only be resolved after attaching. This adds two vtbl related functions from Linux, which are taken from the same kernel version as the current main U-Boot UBI code (Linux 4.2 64291f7db5bd8). Signed-off-by: Hamish Guthrie <hamish.guthrie@kistler.com> Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org>
2019-07-09ubi: fix UBI_SILENCE_MSGMarkus Klotzbuecher
- drop CONFIG_ prefix from kconfig entry - fix small compilation issue with CONFIG_UBI_SILENCE_MSG Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org>
2019-06-06mtd: Fix get_mtdparts()Patrice Chotard
When ENV_IS_IN_UBI is enable, get_mtdparts is called before relocation. During first get_mtdparts() call, mtdparts is not available in environment, it can be retrieved by calling board_mtdparts_default(), but following env_set() do nothing as we are before relocation. Finally mtdparts is still not available in environment. At second get_mtdparts() call, use_defaults is false, but mtdparts is still not in environment and is NULL. Remove use_defaults bool, only mtdparts criteria is useful. Fixes: commit 5ffcd50612f6 ("mtd: Use default mtdparts/mtids when not defined in the environment") Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-21mpc83xx: Migrate CONFIG_SYS_{BR, OR}*_PRELIM to KconfigMario Six
Migrate the BR/OR settings to Kconfig. These must be known at compile time, so cannot be configured via DT. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-18CONFIG_SPL_SYS_[DI]CACHE_OFF: addTrevor Woerner
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances where these configuration items are conditional on SPL. This commit adds SPL variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates the configurations as required. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Trevor Woerner <trevor@toganlabs.com> [trini: Make the default depend on the setting for full U-Boot, update more zynq hardware] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-10mtd: ubi: Remove select for non existent optionChris Packham
There is no 'config CRC32' remove the select that was attempting to use it. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-05-06Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
- Important spi-mem fix
2019-05-04nand: davinci: remove dead code for dm644xBartosz Golaszewski
The support for DaVinci DM* SoCs has been dropped. The code that used to be relevant to dm644x is no longer needed. Remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-03mtd: spi-nor: fix page program issue when using spi-mem driverWeijie Gao
Some SPI controllers can't write nor->page_size bytes in a single step because their TX FIFO is too small, but when that happens we should make sure a WRITE_EN command before each write access and READ_SR command after each write access is issued. We should allow nor->write() to return a size that is smaller than the requested write size to gracefully handle this case. Also, the spi_nor_write_data() should return the actual number of bytes that were written during the spi_mem_exec_op() operation. This patch is a combination of two commits backported from kernel: commit 630d6bd8a3b4 ("mtd: spi-nor: Support controllers with limit ...") commit 3baa8ec88c2f ("mtd: devices: m25p80: Make sure WRITE_EN is ...") Cc: Vignesh R <vigneshr@ti.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Acked-by: Vignesh R <vigneshr@ti.com> Tested-by: Shyam Saini <shyam.saini@amarulasolutions.com> # microzed Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-26mtd: nand: raw: Fix CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT behaviorGregory CLEMENT
The purpose of "mtd: nand: raw: allow to disable unneeded ECC layouts" was to allow disabling the default ECC layouts if a driver is known to provide its own ECC layout. However, this commit did the opposite and disabled the default layout when it was _not_ selected. It breaks all the NAND drivers not providing their own ECC layout this patch fix this situation. It was tested with the lpc32xx_nand_slc driver. Fixes: a38c3af868 ("mtd: nand: raw: allow to disable unneeded ECC layouts") Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-04-22drivers: nand: brcmnand: add an option to read the write-protect from device ↵Philippe Reynes
tree The option write-protect may only change on the kernel command line, we add a property in the device tree to be more flexible. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22drivers: nand: brcmnand: add parameter parameter-page-big-endianPhilippe Reynes
The parameter page isn't always in big endian, so we add an option to choose the endiannes of the parameter page. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22drivers: nand: brcmnand: add initial supportPhilippe Reynes
The driver brcmnand come from linux kernel 4.18. Only SoC bcm6838 and bcm6858 are supported. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22mtd: nand: provide several helpers to do common NAND operationsBoris Brezillon
Linux commit 97d90da8a88 ("mtd: nand: provide several helpers to do common NAND operations") This is part of the process of removing direct calls to ->cmdfunc() outside of the core in order to introduce a better interface to execute NAND operations. Here we provide several helpers and make use of them to remove all direct calls to ->cmdfunc(). This way, we can easily modify those helpers to make use of the new ->exec_op() interface when available. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [miquel.raynal@free-electrons.com: rebased and fixed some conflicts] Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> [Philippe Reynes: adapt code to u-boot and only keep new function] Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-17mtd: rawnand: denali: add reset handlingSimon Goldschmidt
This adds reset handling to the devicetree-enabled Denali NAND driver. For backwards compatibility, only a warning is printed when failing to get reset handles. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-14Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
Conflicts: arch/arm/dts/armada-385-amc.dts arch/arm/dts/armada-xp-theadorable.dts arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-12mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driverChristophe Kerello
The driver adds the support for the STMicroelectronics FMC2 NAND Controller found on STM32MP SOCs. This patch adds the polling mode, a basic mode that do not need any DMA channels. Only NAND_ECC_HW mode is actually supported. The driver supports a maximum 8k page size. The following ECC strength and step size are currently supported: - nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8) - nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4) - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Extended ECC based on Hamming) This patch has been tested on Micron MT29F8G08ABACAH4. Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
2019-04-12mtd: spi-nor-ids: Add Gigadevice gd25lq128 IDNeil Armstrong
This adds support for the Gigadevice gd25lq128 ID needed on the upcoming libretech-ac board. SPI_NOR_QUAD_READ is not set since it has not been tested in Quad mode. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-12dm: spi: Read default speed and mode values from DTPatrick Delaunay
This patch update the behavior introduced by commit 96907c0fe50a ("dm: spi: Read default speed and mode values from DT") In case of DT boot, don't read default speed and mode for SPI from CONFIG_* but instead read from DT node. This will make sure that boards with multiple SPI/QSPI controllers can be probed at different bus frequencies and SPI modes. Remove also use in boards of the value speed=0 (no more supported) for ENV in SPI by using CONFIG_ENV_SPI_MAX_HZ=0. DT values will be always used when available (full DM support of SPI slave with available DT node) even if speed and mode are requested; for example in splash screen support (in splash_sf_read_raw) or in SPL boot (in spl_spi_load_image). The caller of spi_get_bus_and_cs() no more need to force speed=0. But the current behavior don't change if the SPI slave is not present (device with generic driver is created automatically) or if platdata is used (CONFIG_OF_PLATDATA). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-12mtd: spi: Replace ad-hoc default implementation with spi_mem_opMarek Vasut
Replace the ad-hoc erase operation implementation with a simple spi_mem_op implementation of the same functionality. This is a minor optimization and removal of the ad-hoc code. This however also changes the behavior of the execution of the erase opcode from two separate transfer requests to the SPI NOR driver to one transfer request to the SPI NOR driver. The former was how U-Boot behaved before the SPI NOR framework was imported and the later was introduced by the SPI NOR framework. The former is more optimal, so keep that. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: Jagan Teki <jagan@openedev.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Vignesh R <vigneshr@ti.com> Tested-by: Ashish Kumar <Ashish.kumar@nxp.com>
2019-04-12mtd: fix Coverity integer handling issueMiquel Raynal
A Coverity robot reported an integer handling issue (OVERFLOW_BEFORE_WIDEN) in the potentially overflowing expression: (mtd_div_by_ws(mtd->size, mtd) - mtd_div_by_ws(offs, mtd)) * mtd_oobavail(mtd, ops) While such overflow will certainly never happen due to the numbers handled, it is cleaner to fix this operation anyway. The problem is that all the maths include 32-bit quantities, while the result is stored in an explicit 64-bit value. As maxooblen will just be compared with a size_t, let's change the type of the variable to a size_t. This will not fix anything but will clarify a bit the situation. Then, do an explicit cast to fix Coverity warning. Addresses-Coverity-ID: 184180 ("Integer handling issues") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-12mtd: spi: Add Macronix MX66U2G45F deviceMarek Vasut
Add Macronix MX66U2G45F flash device description. This is a 256 MiB part. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Vignesh R <vigneshr@ti.com> [jagan: use 'g' instead of 'f' in flash name] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-12mtd: sf_probe: remove spi-flash compatibleNeil Armstrong
Now the "spi-flash" compatible has been removed in the DTS files, remove this compatible from sf_probe to finally use the Linux "jedec,spi-nor" compatible. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-04-12mtd: add spi flash id s25fl064lHeiko Schocher
Add support for SPANSION s25fl064l Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagan Teki <jagan@openedev.com> Acked-by: Vignesh R <vigneshr@ti.com>
2019-04-12mtd: spinand: Sync GigaDevice GD5F1GQ4UExxG with latest Linux versionStefan Roese
This patch sync's the U-Boot SPI NAND GigaDevice GD5F1GQ4UExxG support with the latest Linux version (v5.0-rc3) plus the chip supported posted on the MTD list. Only the currently in U-Boot available chip is supported with this sync. The changes for the GD5F1GQ4UExxG are: - Name of NAND device changed to better reflect the real part - OOB layout changed to only reserve 1 byte for BBT - Use ECC caps 8bits/512bytes instead of 8bits/2048bytes - Enhanced ecc_get_status() function to determine and report a more fine grained bit error status Signed-off-by: Stefan Roese <sr@denx.de> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jagan Teki <jagan@openedev.com>
2019-04-09mtd: ubi, ubifs debug: Use pr_debug instead of pr_critEran Matityahu
Before printk.h was introduced and MTDDEBUG was removed, pr_crit() was calling MTDDEBUG(), which was since then replaced by the current pr_debug(). pr_debug is more appropriate here. Signed-off-by: Eran Matityahu <eran.m@variscite.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-04-09mtd: ubi debug: Remove the pid print from ubi_assertEran Matityahu
Add a new definition for ubi_assert and keep the original one in an ifndef __UBOOT__. Signed-off-by: Eran Matityahu <eran.m@variscite.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-03-25Convert CONFIG_SF_DEFAULT_* to KconfigPatrick Delaunay
This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-13MTD: mxs_nand_spl: Redo the way nand_init initializesAdam Ford
Currently the spl system calls nand_init which does nothing. It isn't until an attempt to load from NAND that it gets initialized. Subsequent attempts to load just skip the initialization because NAND is already initialized. This moves the contents of mxs_nand_init to nand_init. In the event of an error, it clears the number of nand chips found. Any attempts to use nand will check if there are nand chips available instead of actually doing the initialization at that time. If there are none, it will return an error to the higher level calls. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-02-15MTD: nand: mxs_nand: Allow driver to auto setup ECC in SPLAdam Ford
The initialization of the NAND in SPL hard-coded ecc.bytes, ecc.size, and ecc.strength which may work for some NAND parts, but it not appropriate for others. With the pending patch "mxs_nand: Fix BCH read timeout error on boards requiring ECC" the driver can auto configure the ECC when these entries are blank. This patch has been tested in NAND flash with oob 64 and oob 128. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Jörg Krause <joerg.krause@embedded.rocks> Acked-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Tim Harvey <tharvey@gateworks.com>
2019-02-15MTD: NAND: mxs_nand_init_dma: Make mxs_nand_init_dma staticAdam Ford
mxs_nand_init_dma is only referenced from mxs_nand.c. It's not referenced in any headers or outside code, so this patch defines it as static. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-02-15MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECCAdam Ford
The LogicPD board uses a Micron Flash with ECC. To boot this from SPL, the ECC needs to be correctly configured or the BCH engine times out. Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Stefan Agner <stefan.agner@toradex.com> Tested-by: Jörg Krause <joerg.krause@embedded.rocks> Acked-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Tim Harvey <tharvey@gateworks.com>
2019-02-07mtd: spi: Add lightweight SPI flash stack for SPLVignesh R
Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-07mtd: spi: Remove unused filesVignesh R
spi_flash and spi_flash_ids are no longer needed after SPI NOR migration. Remove them. Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-07mtd: spi: Switch to new SPI NOR frameworkVignesh R
Switch spi_flash_* interfaces to call into new SPI NOR framework via MTD layer. Fix up sf_dataflash to work in legacy way. And update sandbox to use new interfaces/definitions Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-07mtd: spi: sf_probe: Add "jedec, spi-nor" compatible stringVignesh R
Linux uses "jedec,spi-nor" as compatible string for JEDEC compatible SPI Flash device nodes. Therefore make U-Boot also to look for the same compatible string so that we can use Linux DTS files as is. Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-07mtd: spi: spi-nor-core: Add back U-Boot specific featuresVignesh R
For legacy reasons, we will have to keep around U-Boot specific SPI_FLASH_BAR and SPI_TX_BYTE. Add them back to the new framework Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-07mtd: spi: spi-nor-core: Add SFDP supportVignesh R
Sync Serial Flash Discoverable Parameters (SFDP) parsing support from Linux. This allows auto detection and configuration of Flash parameters. Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-07mtd: spi: spi-nor-core: Add 4 Byte addressing supportVignesh R
Sync changes from Linux SPI NOR framework to add 4 byte addressing support. This is required in order to support flashes like MT35x that no longer support legacy Bank Address Register(BAR) way of accessing >16MB region. Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-07mtd: spi: spi-nor-core: Add SPI MEM supportVignesh R
Many SPI controllers have special MMIO interfaces which provide accelerated read/write access but require knowledge of flash parameters to make use of it. Recent spi-mem layer provides a way to support such controllers. Therefore, add spi-mem support to spi-nor-core as a way to support SPI controllers with MMIO interface. SPI MEM layer takes care of translating spi_mem_ops to spi_xfer()s in case of legacy SPI controllers. Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-07mtd: spi: Port SPI NOR framework from LinuxVignesh R
Current U-Boot SPI NOR support (sf layer) is quite outdated as it does not support 4 byte addressing opcodes, SFDP table parsing and different types of quad mode enable sequences. Many newer flashes no longer support BANK registers used by sf layer to a access >16MB of flash address space. So, sync SPI NOR framework from Linux v4.19 that supports all the above features. Start with basic sync up that brings in basic framework subsequent commits will bring in more features. Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-01-28MTD: nand: mxs_nand_spl: Fix empty function pointer for BBTAdam Ford
The initialization function calls a nand_chip.scan_bbt(mtd) but scan_bbt is never initialized resulting in an undefined function pointer. This will direct the function pointer to nand_default_bbt defined in the same file. Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-24mtd: nand: arasan_nfc: Add support for nand multi chip selectT Karthik Reddy
This patch adds support for nand multi chip select. Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number of nand chips. Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-21ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to KconfigDerald D. Woods
This commit converts the following items to Kconfig: CONFIG_ATMEL_NAND_HWECC CONFIG_ATMEL_NAND_HW_PMECC CONFIG_PMECC_CAP CONFIG_PMECC_SECTOR_SIZE CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER [PMECC References] https://www.at91.com/linux4sam/bin/view/Linux4SAM/PmeccConfigure https://www.at91.com/linux4sam/bin/view/Linux4SAM/AT91Bootstrap [Mailing List Thread] https://lists.denx.de/pipermail/u-boot/2018-December/350666.html Fixes: 5541543f ("configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment") [trini: Make the migration be size neutral and possibly not fix the above in all cases] Reported-by: Daniel Evans <photonthunder@gmail.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-16mtd: nand: raw: allow to disable unneeded ECC layoutsStefan Agner
Each ECC layout consumes about 2984 bytes in the .data section. Allow to disable the default ECC layouts if a driver is known to provide its own ECC layout. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-01-02Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2019-01-02mtd: nand: raw: Add Hynix H27UBG8T2BTR id tableNikolai Zhubr
This patch adds Hynix H27UBG8T2BTR id table as part of raw nand, these chips were available in some A20-olinuxino-micro boards. Signed-off-by: Nikolai Zhubr <n-a-zhubr@yandex.ru> [jagan: add proper commit message] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-01Merge tag 'u-boot-imx-20190101' of git://www.denx.de/git/u-boot-imxTom Rini
imx for 2019.01 - introduce support for i.MX8M - fix size limit for Vhybrid / pico boards - several board fixes - w1 driver for MX2x / MX5x
generated by cgit (git 2.34.1) at 2024-12-23 19:55:17 +0000