summaryrefslogtreecommitdiff
path: root/drivers/net/macb.c
AgeCommit message (Collapse)Author
2020-03-31net: macb: Fix incorrect write function name when MACB_ZYNQ is enabled.Michal Simek
When MACB_ZYNQ is enabled there is compilation warnings drivers/net/macb.c: In function ‘_macb_init’: drivers/net/macb.h:675:33: error: ‘MACB_DMACFG’ undeclared (first use in this function); did you mean ‘MACB_MCF’? writel((value), (port)->regs + MACB_##reg) ^~~~~ It has been caused by changing macros name by commit below. Fixes: 6c636514d499 ("net: macb: sync header definitions as taken from Linux") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-02-19dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>Masahiro Yamada
The implementation of dma_map_single() and dma_unmap_single() is exactly the same for all the architectures that support them. Factor them out to <linux/dma-mapping.h>, and make all drivers to include <linux/dma-mapping.h> instead of <asm/dma-mapping.h>. If we need to differentiate them for some architectures, we can move the generic definitions to <asm-generic/dma-mapping.h>. Add some comments to the helpers. The concept is quite similar to the DMA-API of Linux kernel. Drivers are agnostic about what is going on behind the scene. Just call dma_map_single() before the DMA, and dma_unmap_single() after it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19dma-mapping: fix the prototype of dma_unmap_single()Masahiro Yamada
dma_unmap_single() takes the dma address, not virtual address. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-25net: macb: Drop local cache flushVignesh Raghavendra
Now that arch specific dma mapping APIs take care of cache flush/invalidate, drop local cache flush operation. While at that fix dma_unmap_single() call to match new prototype Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-12-09net: macb: let miiphy_read/_write pass arbitrary addressesJosef Holzmayr
This allows passing arbitrary addresses through macb_miiphy_read and macb_miiphy_write, therefore enabling the mii command to access all mdio bus devices instead of only the defined phy. Signed-off-by: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09net: macb: explicitly pass phy_adr to mdio read and writeJosef Holzmayr
To support accessing arbitrary addresses the mii/mdio bus it is necessary that the macb_mdio_read and macb_mdio_write functions do not implicitly use the address of the connected phy. The function signature is extended according to the Linux kernel equivalent. Signed-off-by: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-02common: Move ARM cache operations out of common.hSimon Glass
These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-10-08net: macb: Add sam9x60-macb compatibility stringNicolas Ferre
Add this new compatibility string for matching sam9x60 product macb. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2019-09-04net: macb: Fix rx buffer cache handlingStefan Roese
With commit c6d07bf440bc ("net/macb: increase RX buffer size for GEM") ethernet support does not work any more with d-cache enabled on the AT91SAM. The reason is, that MACB_RX_BUFFER_SIZE was changed from 4096 to 128 but this change was not refected in the rx_buffer flush and invalidate functions, as these also use this macro. This patch now fixes this by calculating the rx buffer size correctly again in those functions. With this change, ethernet works again reliably on my AT91SAM board. Signed-off-by: Stefan Roese <sr@denx.de> Fixes: c6d07bf440bc ("net/macb: increase RX buffer size for GEM") Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04Revert "net: macb: Fixed reading MII_LPA register"Bin Meng
This reverts commit 1b0c9914cc75d1570359181ebd493cd5746cb0ed. Commit 1b0c9914cc75 ("net: macb: Fixed reading MII_LPA register") causes 100Mbps does not work any more with SiFive FU540 GEM on the HiFive Unleashed board. Revert it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net: macb: Fix check for little-endian system in gmac_configure_dma()Anup Patel
Instead of depending on CONFIG_SYS_LITTLE_ENDIAN, we check at runtime whether underlying system is little-endian or big-endian. This way we are not dependent on any U-Boot specific OR compiler specific macro to check system endianness. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net: macb: Extend MACB driver for SiFive Unleashed boardAnup Patel
The SiFive MACB ethernet has a custom TX_CLK_SEL register to select different TX clock for 1000mbps vs 10/100mbps. This patch adds SiFive MACB compatible string and extends the MACB ethernet driver to change TX clock using TX_CLK_SEL register for SiFive MACB. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net/macb: increase RX buffer size for GEMRamon Fried
Macb Ethernet controller requires a RX buffer of 128 bytes. It is highly sub-optimal for Gigabit-capable GEM that is able to use a bigger DMA buffer. Change this constant and associated macros with data stored in the private structure. RX DMA buffer size has to be multiple of 64 bytes as indicated in DMA Configuration Register specification. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net: macb: apply sane DMA configurationRamon Fried
DMA configuration was heavily dependent on the HW defaults, add function to properly set the required fields, including the new dma_burst_length. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Anup Patel <anup.patel@wdc.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net: macb: add dma_burst_length configRamon Fried
GEM support higher DMA burst writes/reads than the default (4). add configuration structure with dma burst length so it could be applied later to DMA configuration. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Anup Patel <anup.patel@wdc.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net: macb: add support for SGMII phy interfaceRamon Fried
This patch adds support for the sgmii phy interface, available only to DM users, dictated by current driver design. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Anup Patel <anup.patel@wdc.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net: macb: use bit access macro from header fileRamon Fried
macb.h provides macros for reading/setting bitfields, in macb registers and descriptors. use that instead of redefining them in the source file. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Anup Patel <anup.patel@wdc.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net: macb: add support for faster clk ratesRamon Fried
add support for clock rates higher than 2.4Mhz Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Anup Patel <anup.patel@wdc.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25net: macb: sync header definitions as taken from LinuxRamon Fried
Few registers and bits were added by Cadence and they were not updated in the headers. Take the latest definitions as defined in Linux header (5.1) that also includes some comments about existing registers. One register was improperly named (UR), fix that. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Anup Patel <anup.patel@wdc.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15net: macb: Add support for 1000-baseXRadu Pirea
Macb can be used with Xilinx PCS/PMA PHY in fpga which is a 1000-baseX phy(lpa 0x41e0). This patch adds checks for LPA_1000XFULL and LPA_1000XHALF bits. Signed-off-by: Radu Pirea <radu_nicolae.pirea@upb.ro> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15net: macb: Fixed reading MII_LPA registerRadu Pirea
If macb is gem and is gigabit capable, lpa value is not read from the right register(MII_LPA) and is read from MII_STAT1000. This patch fixes reading of the lpa value. Signed-off-by: Radu Pirea <radu_nicolae.pirea@upb.ro> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-06-01dm: net: macb: Implement link speed change callbackBin Meng
At present the link speed change callback is a nop. According to macb device tree bindings, an optional "tx_clk" is used to clock the ethernet controller's TX_CLK under different link speed. In 10/100 MII mode, transmit logic must be clocked from a free running clock generated by the external PHY. In gigabit GMII mode, the controller, not the external PHY, must generate the 125 MHz transmit clock towards the PHY. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Tested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-06-01dm: net: macb: Update macb_linkspd_cb() signatureBin Meng
This updates DM version macb_linkspd_cb() signature for future expansion, eg: adding an implementation for link speed changes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-09net: macb: Add small delay after link establishmentStefan Roese
I've noticed that the first ethernet packet after PHY link establishment is not tranferred correctly most of the time on my AT91SAM9G25 board. Here I usually see a timeout of a few seconds, which is quite annoying. Adding a small delay (10ms in this case) after the link establishment helps to solve this problem. With this patch applied, this timeout on the first packet is not seen any more. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Wenyou Yang <wenyou.yang@atmel.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-02-27net: macb: Fix GEM hardware detectionAtish Patra
Fix MID bit field check to correctly identify all GEM hardwares. The check is updated as per macb driver in Linux location: <linux_sources>/drivers/net/ethernet/cadence/macb_main.c:259 Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-02-27net: macb: Fix clk API usage for RISC-V systemsAnup Patel
Don't fail in macb_enable_clk() if clk_enable() returns -ENOSYS because we get -ENOSYS for fixed-rate clocks. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-01-24net: macb: fix mapping of registersRamon Fried
Some architectures (MIPS) needs mapping to access IOMEM. Fix that. Fixes: f1dcc19b213d ("net: macb: Convert to driver model") Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-22net: macb: remove superfluous logical constraintHeinrich Schuchardt
In if (a > =0) {...} else (a < 0) {...} the second logical constraint is superfluous. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15net: macb: Add support for Xilinx Zynq SoCWilson Lee
Although Xilinx Zynq SoC was using MACB similar hardware. However, U-boot MACB driver was not supporting Xilinx Zynq SoC. This patch is to add support for the Xilinx Zynq SoC to the existing MACB network driver. This patch is to add Zynq GEM DMA Config, provide callback function for different linkspeed for case of using Xilinx Zynq Programmable Logic as GMII to RGMII converter. This patch convert the return value to use error codes. Signed-off-by: Wilson Lee <wilson.lee@ni.com> Cc: Chen Yee Chew <chen.yee.chew@ni.com> Cc: Keng Soon Cheah <keng.soon.cheah@ni.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02net: macb: Fix GMAC not work when enable DM_ETHWenyou Yang
Always search the PHY to determine the macb->phy_addr before using the PHY to fix "No PHY present" error. Fix the wrong test of the GMAC's phy interface mode, it should be PHY_INTERFACE_MODE_RGMII. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-01dm: Rename dev_addr..() functionsSimon Glass
These support the flat device tree. We want to use the dev_read_..() prefix for functions that support both flat tree and live tree. So rename the existing functions to avoid confusion. In the end we will have: 1. dev_read_addr...() - works on devices, supports flat/live tree 2. devfdt_get_addr...() - current functions, flat tree only 3. of_get_address() etc. - new functions, live tree only All drivers will be written to use 1. That function will in turn call either 2 or 3 depending on whether the flat or live tree is in use. Note this involves changing some dead code - the imx_lpi2c.c file. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-09net: macb: Align the compatibles with kernelWenyou Yang
Add the compatibles to align with the kernel. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-05-09net: macb: Add remove callbackWenyou Yang
To avoid the failure of mdio_register(), add the remove callback to unregister the mii_dev when removing the ethernet device. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Fixed up unused variable warning, e.g. for gurnard: Signed-off-by: Simon Glass <sjg@chromium.org>
2017-03-01net: macb: Fix ETH not found when clock not supportWenyou Yang
For the boards such as smartweb on which the clock driver isn't supported, the ethernet fail to be found when booting up with the below log. ---8<--- Net: No ethernet found. --->8--- Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-09Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini
2017-02-08dm: core: Replace of_offset with accessorSimon Glass
At present devices use a simple integer offset to record the device tree node associated with the device. In preparation for supporting a live device tree, which uses a node pointer instead, refactor existing code to access this field through an inline function. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-07net: macb: Remove redundant #ifdef CONFIG_DM_ETHWenyou Yang
Remove the redundant #ifdef CONFIG_DM_ETH/#endif. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: macb: Add the clock supportWenyou Yang
Due to introducing the at91 clock driver, add the clock support. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-10-01net, macb: fix misaligned cache operation warningHeiko Schocher
when using tftp on the smartweb board, it prints a lot of CACHE: Misaligned operation at range [23b2e000, 23b2e100] warnings ... fixed them. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-09-23treewide: replace #include <asm-generic/errno.h> with <linux/errno.h>Masahiro Yamada
Now, include/linux/errno.h is a wrapper of <asm-generic/errno.h>. Replace all include directives for <asm-generic/errno.h> with <linux/errno.h>. <asm-generic/...> is supposed to be included from <asm/...> when arch-headers fall back into generic implementation. Generally, they should not be directly included from .c files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Add drivers/usb/host/xhci-rockchip.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-15net: mii: Use spatch to update miiphy_registerJoe Hershberger
Run scripts/coccinelle/net/mdio_register.cocci on the U-Boot code base. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-15net: macb: Fix build error for CONFIG_DM_ETH enabledWenyou Yang
Use the right phy_connect() prototype for CONFIGF_DM_ETH. Support to get the phy interface from dt and set GMAC_UR. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-06-12net: macb: Convert to driver modelSimon Glass
Add driver-model support to this driver. The old code remains for now so that we can convert boards one at a time. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Tested-on: smartweb, corvus, taurus, axm Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-12net: macb: Flush correct cache portion when sendingSimon Glass
The end address of the cache flush must be cache-line-aligned since otherwise (at least on ARM926-EJS) the request is ignored. When the cache is enabled this means that packets are not sent. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-12net: macb: Prepare for driver-model conversionSimon Glass
Adjust this driver to avoid using struct netdev in functions that driver model will call. Also refactor the receive function to be compatible with driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Tested-on: smartweb, corvus, taurus, axm Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-05-05Fix various typos, scattered over the code.Robert P. J. Day
Spelling corrections for (among other things): * environment * override * variable * ftd (should be "fdt", for flattened device tree) * embedded * FTDI * emulation * controller
2016-01-27net: macb: Not all the GEM are gigabit capableGregory CLEMENT
During the initialization of PHY the gigabit bit capable is set if the controller is a GEM. However, for sama5d2 and sama5d4, the GEM is configured to support only 10/100. Improperly setting the GBE capability leads to an unresponsive MAC controller. This patch fixes this behavior allowing using the gmac with these SoCs. Suggested-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> [fixed minor checkpatch warning] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-08-11net: macb: add gmac multi-queue supportWu, Josh
This patch refer to linux kernel commit: d8b763e1e79f net/macb: add TX multiqueue support for gem by: Cyrille Pitchen 1. macb driver will check the register to find how many queues support for this chip. 2. Then as we only use queue0 for tx, so we will set up all other queues use a dummy descriptor, which USED bit is set. So those queues are not used. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-19net: Update hardware MAC address if it changes in envJoe Hershberger
When the ethaddr changes in the env, the hardware should also be updated so that MAC filtering will work properly without resetting U-Boot. Also remove the manual calls to set the hwaddr that was included in a few drivers as a result of the framework not doing it. Reported-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Tested-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2024-12-24 02:26:49 +0000