summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2020-06-18net: eepro100: Add cache managementMarek Vasut
Add cache invalidation and flushes wherever the DMA descriptors are written or read, otherwise this driver cannot work reliably on any systems where caches are enabled. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Factor out tx_ring command issuingMarek Vasut
This code is replicated in the driver thrice almost verbatim, factor it out into a separate function and clean it up. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Replace purge_tx_ring() with memset()Marek Vasut
This function zeroes-out all the descriptors in the TX ring, use memset() instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Use standard I/O accessorsMarek Vasut
The current eepro100 driver accesses its memory mapped registers directly instead of using the standard I/O accessors. This can cause problems on some systems as the accesses can get out of order. So convert the direct volatile dereferences to use the normal in/out macros. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Fix camelcaseMarek Vasut
This is automated cleanup via checkpatch, no functional change. ./scripts/checkpatch.pl --show-types -f drivers/net/eepro100.c ./scripts/checkpatch.pl --types INDENTED_LABEL -f --fix --fix-inplace drivers/net/eepro100.c Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Fix remaining checkpatch issuesMarek Vasut
This is automated cleanup via checkpatch, no functional change. ./scripts/checkpatch.pl --show-types -f drivers/net/eepro100.c ./scripts/checkpatch.pl -f --fix --fix-inplace drivers/net/eepro100.c This fixes all the remaining errors except a couple of comments which are longer than 80 characters, all the volatile misuse and all the camelcase, that needs a separate patch. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Fix indented labelMarek Vasut
This is automated cleanup via checkpatch, no functional change. ./scripts/checkpatch.pl --show-types -f drivers/net/eepro100.c ./scripts/checkpatch.pl --types INDENTED_LABEL -f --fix --fix-inplace drivers/net/eepro100.c Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Fix pointer locationMarek Vasut
This is automated cleanup via checkpatch, no functional change. ./scripts/checkpatch.pl --show-types -f drivers/net/eepro100.c ./scripts/checkpatch.pl --types POINTER_LOCATION -f --fix --fix-inplace drivers/net/eepro100.c Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Fix parenthesis alignmentMarek Vasut
This is automated cleanup via checkpatch, no functional change. ./scripts/checkpatch.pl --show-types -f drivers/net/eepro100.c ./scripts/checkpatch.pl --types PARENTHESIS_ALIGNMENT -f --fix --fix-inplace drivers/net/eepro100.c Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Fix bracesMarek Vasut
This is automated cleanup via checkpatch, no functional change. ./scripts/checkpatch.pl --show-types -f drivers/net/eepro100.c ./scripts/checkpatch.pl --types BRACES -f --fix --fix-inplace drivers/net/eepro100.c Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Fix spacingMarek Vasut
This is automated cleanup via checkpatch, no functional change. ./scripts/checkpatch.pl --show-types -f drivers/net/eepro100.c ./scripts/checkpatch.pl --types SPACING -f --fix --fix-inplace drivers/net/eepro100.c Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Use plain debug()Marek Vasut
Convert all the ifdef DEBUG to plain debug(), no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Clean up commentsMarek Vasut
Clean the comments up to they trigger fewer checkpatch warnings, no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Remove EEPRO100_SROM_WRITEMarek Vasut
This code is never enabled, last board that used it was ELPPC which was removed some 5 years ago, so just remove this code altogether. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18Merge tag 'ti-v2020.10-next' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next - DM conversion for OMAP4, OMAP5 platforms. - Other minor fixes for Nokia RX51, am33, am57, am654.
2020-06-16net: cpsw: Add __maybe_unused to generated inlinesTom Rini
We generate a number of helper inline functions to make accesses easier. However not all permutations of each function will be used and clang will warn about unused ones. Decorate all of them with __maybe_unused because of this. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2020-06-12net: rtl8139: Add DM supportMarek Vasut
Add support for driver model to the driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Read HW address from EEPROM only on probeMarek Vasut
Do not re-read the HW address from the EEPROM on every start of transfer, otherwise the user will not be able to adjust ethaddr as needed. Read the address only once, when the card is detected. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Use PCI_DEVICE() to define PCI device compat listMarek Vasut
Use this macro to fully fill the PCI device ID table. This is mandatory for the DM PCI support, which checks all the fields. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Split out common and non-DM functionsMarek Vasut
Split the driver into common and non-DM functionality, so that the DM support can later re-use the common code, while we retain the non-DM code until all the platforms are converted. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Pass private data into rtl8139_eeprom_delay()Marek Vasut
Instead of always calling rtl8139_eeprom_delay() with priv->ioaddr, call it with priv and let the function access priv->ioaddr. This reduces code duplication and has no impact, since the compiler will inline this as needed anyway. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Introduce device private dataMarek Vasut
Introduce rtl8139_pdata, which is a super-structure around eth_device and tracks per-device state, here the device IO address, PCI BDF, RX and TX ring position. Pass this structure around instead of the old non-DM eth_device in preparation for DM conversion. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Clean up bus_to_phys()/phys_to_bus() macrosMarek Vasut
These macros depended on the dev variable being declared wherever they were used. This is wrong and will not work with DM anyway, so pass only the PCI BFD into these macros, which fixes the dependency and prepares them for DM support as well. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Use dev->iobase instead of custom ioaddrMarek Vasut
Replace the use of custom static ioaddr variable with common dev->iobase, no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Switch from malloc()+memset() to calloc()Marek Vasut
Replace malloc()+memset() combination with calloc(), no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: rtl8139: Factor out device name assignmentMarek Vasut
Pull the device name setting into a separate function, as this will be shared between DM/non-DM variants. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12net: phy: Add DP8382x phy registration to TI PHY initDan Murphy
Add the DP8382X generic PHY registration to the TI PHY init file. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Dan Murphy <dmurphy@ti.com>
2020-06-12net: phy: Add support for TI PHY initDan Murphy
ti_phy_init function was allocated to the DP83867 PHY. This function name is to generic for a specific PHY. The function can be moved to a TI specific file that can register all TI PHYs that are defined in the defconfig. The ti_phy_init file will contain all TI PHYs initialization so that only phy_ti_init can be called from the framework. In addition to the above the config flag for the DP83867 needs to be changed in the Kconfig and dependent defconfig files. The config flag that was used for the DP83867 was also generic in nature so a more specific config flag for the DP83867 was created. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Dan Murphy <dmurphy@ti.com>
2020-06-12net: phy: add phyid search in vendor specific spaceFlorin Chiculita
There are devices accesible through mdio clause-45, such as retimers, that do not have PMA or PCS blocks. This patch adds MDIO_MMD_VEND1 on the list of device addresses where phyid is searched. Previous order of devices was kept. Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com> Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
2020-06-12net: rt8169: WAR for DHCP not getting IP after kernel boot/rebootTom Warren
This is a WAR for DHCP failure after rebooting from the L4T kernel. The r8169.c kernel driver is setting bit 19 of the rt816x HW register 0xF0, which goes by FuncEvent and MISC in various driver source/datasheets. That bit is called RxDv_Gated_En in the r8169.c kernel driver. Clear it here at the end of probe to ensure that U-Boot can get an IP assigned via DHCP. Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-06-12net: phy: micrel: ksz8061 implement errata 80000688A fixBryan O'Donoghue
Linux commit 232ba3a51cc2 ('net: phy: Micrel KSZ8061: link failure after cable connect') implements a fix for the above errata. This patch replicates that errata fix in an ksz8061 specific init routine. Signed-off-by: Bryan O'Donoghue <bod@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-06-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
- DM_ETH support for P2041RDB, T1024RDB, P5040DS, P3041DS, P4080DS, bug fixes - Add TBI PHY access through MII - DDR: Rework errata workaround for A008109, A008378, 009942
2020-06-04net: tsec: Access TBI PHY through the corresponding MIIHou Zhiqiang
When an eTSEC is configured to use TBI, configuration of the TBI is done through the MIIM registers for that eTSEC. For example, if a TBI interface is required on eTSEC2, then the MIIM registers starting at offset 0x2_5520 are used to configure it. Fixes: 9a1d6af55ecd ("net: tsec: Add driver model ethernet support") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04net: tsec: Access eTSEC registers using virtual addressHou Zhiqiang
The current code accesses eTSEC registers using physical address directly, it's not correct, though no problem on current platforms. It won't work on platforms, which does not support 1:1 virtual-physical address map. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04net: tsec: fsl_mdio: add DM MDIO supportMadalin Bucur
Allow the MDIO devices to be probed based on the device tree. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-03drivers: net: e1000: with DM_ETH needs DM_PCI tooMadalin Bucur
Compilation error occur when DM_ETH is enabled without DM_PCI. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-01net: sun8i_emac: Add support for the H6 variantSamuel Holland
The H6 EMAC is very similar to the H3 variant, except that it uses the same pinmux as R40. Add support for it. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-01net: sun8i_emac: Use consistent clock bitfield definitionsSamuel Holland
While the R40 uses a different register for EMAC clock configuration than other chips, the register has a very similar layout. Reuse the existing bitfield definitions in this file, since they match. This allows the driver to compile on the H6 platform, where the CCM_GMAC_CTRL definitions are not present. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-22net: ks8851: Add Kconfig entriesMarek Vasut
Convert CONFIG_KS8851_MLL and CONFIG_KS8851_MLL_BASEADDR to Kconfig Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Add DM supportMarek Vasut
Add support for U-Boot DM and DT probing. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Receive one packet per recv callMarek Vasut
Instead of reading out the entire FIFO and possibly overwriting U-Boot memory, read out one packet per recv call, pass it to U-Boot network stack, and repeat. It is however necessary to cache RXFC value, because reading that one out clears it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Split non-DM specific bits from common codeMarek Vasut
Split network handling functions into non-DM specific parts and common code in preparation for conversion to DM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Pass around driver private dataMarek Vasut
Introduce a private data structure for this driver with embedded struct eth_device and pass it around. This prepares the driver to work with both DM and non-DM systems. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Checkpatch cleanupMarek Vasut
Fix various checkpatch complaints. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Clean up chip ID readoutMarek Vasut
There is only one chip ID in the table of chip IDs for this chip. Read out the chip ID instead and mask off the last "revision" bit to check the chip ID, this works for all chips in the family. Then drop the chip ID passing around. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Remove type_frame_headMarek Vasut
The packet status and length information should be extracted from the FIFO per-packet. Adjust the code such that it reads the packet meta data and then the packet afterward, if applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Trim down struct ks_netMarek Vasut
Most of the entries in the structure are useless, remove them. Inline the rest of uses where applicable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Use 16bit RXQCR accessMarek Vasut
Per KS8851-16MLL, the RXQCR is a 16bit register. Use 16bit accessors to it consistently and drop the ks_wrreg8() function altogether, as it is not used anymore. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Remove RXQCR cacheMarek Vasut
The cached RXQCR value is never updated, remove the cache and just use the bits in the cache directly in the code. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22net: ks8851: Replace malloc()+memset() with calloc()Marek Vasut
Replace combination of malloc()+memset() with calloc() as the behavior is exactly the same and the amount of code is reduced. Moreover, remove printf() in the fail path, as it is useless, and return proper -ENOMEM return code. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit (git 2.34.1) at 2025-01-09 03:34:12 +0000