summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2017-02-08Merge git://git.denx.de/u-boot-dmTom Rini
2017-02-08drivers: net: cpsw: Fix reading of mac address for am43 SoCsLokesh Vutla
cpsw driver tries to get macid for am43xx SoCs using the compatible ti,am4372. But not all variants of am43x uses this complatible like epos evm uses ti,am438x. So use a generic compatible ti,am43 to get macid for all am43 based platforms. Tested-by: Aparna Balasubramanian <aparnab@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-02-08dm: core: Replace of_offset with accessorSimon Glass
At present devices use a simple integer offset to record the device tree node associated with the device. In preparation for supporting a live device tree, which uses a node pointer instead, refactor existing code to access this field through an inline function. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-03Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/ls1046aqds_defconfig configs/ls1046aqds_nand_defconfig configs/ls1046aqds_qspi_defconfig configs/ls1046aqds_sdcard_ifc_defconfig configs/ls1046aqds_sdcard_qspi_defconfig configs/ls1046ardb_emmc_defconfig configs/ls1046ardb_qspi_defconfig configs/ls1046ardb_sdcard_defconfig
2017-02-01net: phy: Support Marvell 88E1680Dirk Eibach
Add support for Marvell 88E1680 Integrated Octal 10/100/1000 Mbps Energy Efficient Ethernet Transceiver. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-01-31drivers: net: fsl-mc: Fixup MAC addresses in DPCBogdan Purcareata
Fixup port_mac_address property in MC DPC with values from the u-boot environment. Since u-boot already reads the environment MAC addresses when probing the PHYs, use these values. The u-boot environment MAC addresses take precedence over any eventual ones defined in the DPC, except for the case where they are randomly assigned (no u-boot env value declared for port). The patch assumes the "/board_info/ports/" node is present in the DPC. Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> [York S: Fix several indentations] Reviewed-by: York Sun <york.sun@nxp.com>
2017-01-28net: phy: add SMSC LAN8742 phyMichael Kurz
This patch adds support for SMSC LAN8742 in phylib Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-28net: stm32: add designware mac glue code for stm32Michael Kurz
This patch adds glue code required for enabling the designware mac on stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-11net: gmac_rockchip: Add Rockchip GMAC driverSjoerd Simons
Add a new driver for the GMAC ethernet interface present in Rockchip RK3288 SOCs. This driver subclasses the generic design-ware driver to add the glue needed specifically for Rockchip. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Romain Perier <romain.perier@collabora.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-11net: designware: Export the operation functionsSimon Glass
Export all functions so that drivers can use them, or not, as the need arises. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Romain Perier <romain.perier@collabora.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-11net: designware: Split the link init into a separate functionSimon Glass
With rockchip we need to make adjustments after the link speed is set but before enabling received/transmit. In preparation for this, split these two pieces into separate functions. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Romain Perier <romain.perier@collabora.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-11net: designware: Adjust dw_adjust_link() to return an errorSimon Glass
This function can fail, so return the error if there is one. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Romain Perier <romain.perier@collabora.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-11net: designware: Export various functions/struct to allow subclassingSjoerd Simons
To allow other DM drivers to subclass the designware driver various functions and structures need to be exported. Export these. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Romain Perier <romain.perier@collabora.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-11xilinx_phy: Pass correct pointer to fdtdec_get_int()Kamensky Ivan
This patch fixes incorrect pointer on offset device in device tree blob. When using with the component "Ethernet 1G/2.5G BASE-X PCS/PMA or SGMII" it does not understand what type is XAE_PHY_TYPE_1000BASE_X and trying to change frequency. Signed-off-by: Kamensky Ivan <kamensky.ivan@mail.ru> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-10net: zynq_gem: Use clock driver for ZynqMPSiva Durga Prasad Paladugu
Enable and use the clock driver routine defined in clock driver toset required clock appropriately. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10net: gem: Use wait_for_bit() instead of private mdio_wait()Michal Simek
Using generic wait_for_bit() implementation instead of using private wait function. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-04powerpc: mpc85xx: Remove variant SoCs T1020/T1022/T1013/T1014York Sun
Remove these SoCs from Kconfig because they don't have individual configuration. Clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
2016-12-27Update Maintainer and Author's email addressAjay Bhargav
I am not longer using my old email address "ajay.bhargav@einfochips.com". For U-Boot development email address is now updated to contact@8051projects.net Signed-off-by: Ajay Bhargav <contact@8051projects.net>
2016-12-20net: xilinx: Use mdio_register_seq() to support multiple instancesMichal Simek
axi_emac, emaclite and gem have the same issue with registering multiple instances with mdio busses. mdio bus name has to be uniq but drivers are setting up only one name for all. Use mdio_register_seq() and pass dev->seq number to allow multiple mdio instances registration. Reported-by: Phani Kiran Kara <phanikiran.kara@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-18Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
Migrate CONFIG_ARCH_USE_MEMSET/MEMCPY with this merge. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-12-16dm: net: fec: Add .read_rom_hwaddrJagan Teki
Add .read_rom_hwaddr on dm eth_ops. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-16net: fec_mxc: Driver cleanupsJagan Teki
- Remove exctra space - Add space - Add tab space - Fix single line comments quotes - Fix 'CHECK: Avoid CamelCase' - Fix 'CHECK: Alignment should match open parenthesis' - Fix 'WARNING: line over 80 characters' - Re-arrage header include files Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-16net: fec_mxc: Convert into driver modelJagan Teki
This patch add driver model support for fec_mxc driver. Cc: Simon Glass <sjg@chromium.org> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-16net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddrJagan Teki
fec_get_hwaddr never used eth_device argument, hence removed. Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-16arm: imx: add i.MX53 Beckhoff CX9020 Embedded PCPatrick Bruenn
Add CX9020 board based on mx53loco. Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse serial_mxc with DTE and prepare for device tree migration of other functions and imx53 devices. The CX9020 differs from i.MX53 Quick Start Board by: - use uart2 instead of uart1 - DVI-D connector instead of VGA - no audio - CCAT FPGA connected to emi - enable rtc Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2016-12-15driver: fsl-mc: qbman: Add QBMAN 4.1 supportPriyanka Jain
LS2080A SoC family has QBMAN ver 4.0 whereas newer SoCs like LS2088A, LS1088A has QBMAN ver 4.1 QBMAN ver 4.0 and ver 4.1 supports dqrr size as 4 and 8 respectively. Add support of to check QBMAN version based on SoC SVR update dqrr_size accordingly update code to support larger dqrr_size Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-12-09Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze"Tom Rini
This reverts commit 3edc0c252257e4afed163a3a74aba24a5509b198, reversing changes made to bb135a0180c31fbd7456021fb9700b49bba7f533.
2016-12-09Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini
2016-12-08net/phy/vitesse: Rework RGMII skew configuration for VSC8601Alex
The VSC8601 config tried to add an RGMII skew based on #defines that no config defines. That's quite an ugly way to do it. Since the skew is only needed on RGMII interfaces, check the interface mode at runtime, and apply the settings accordingly. Tested on custom board with AM3352 SOC and VSC801 PHY. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-08net: fman: fix 2.5G SGMII settingsshaohui xie
The settings for 2.5G SGMII are wrong, which the 2.5G case is missed in set_if_mode(), and the serdes PCS configuration are wrong, this patch uses the correct settings took from Linux. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-08net: phy: realtek: Only force master mode on rtl8211b/coliver@schinagl.nl
Commit 525d187af ("net: phy: Optionally force master mode for RTL PHY") added the define to force the PHY into master mode. Unfortunatly this is an all or nothing switch. So it applies to either all PHY's or no PHY's. The bug that define tried to solve was a buggy PLL in the RTL8211C only. The Olimex OLinuXino Lime2 has gotten an upgrade where the PHY was replaced with an RTL8211E. With this define however, both lime2 boards are either forced to master mode or not. We could of course have a binary for each board, but the following patch fixes this by adding a 'quirk' to the flags to the rtl8211b and rtl8211c only. It is now possible to force master mode, but only have it apply to the rtl8211b and rtl8211c. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-08net: phy: realtek: make define more consistentoliver@schinagl.nl
All internal defines in the realtek phy are with a small X, except MIIM_RTL8211X_CTRL1000T_MASTER. Make this more consistent Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-08net: phy: realtek: Use the BIT() macrooliver@schinagl.nl
The BIT macro is the preferred method to set bits. This patch adds the bit macro and converts bit invocations. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-08net: phy: micrel: Fix error handlingMarek Vasut
Fix the following error, the $ret variable handling must be part of the loop, while due to the missing parenthesis it was not. drivers/net/phy/micrel.c: In function ‘ksz9021_of_config’: drivers/net/phy/micrel.c:303:2: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation] for (i = 0; i < ARRAY_SIZE(ofcfg); i++) ^~~ drivers/net/phy/micrel.c:305:3: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘for’ if (ret) ^~ drivers/net/phy/micrel.c: In function ‘ksz9031_of_config’: drivers/net/phy/micrel.c:411:2: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation] for (i = 0; i < ARRAY_SIZE(ofcfg); i++) ^~~ drivers/net/phy/micrel.c:413:3: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘for’ if (ret) ^~ Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-08net: xilinx: Use mdio_register_seq() to support multiple instancesMichal Simek
axi_emac, emaclite and gem have the same issue with registering multiple instances with mdio busses. mdio bus name has to be uniq but drivers are setting up only one name for all. Use mdio_register_seq() and pass dev->seq number to allow multiple mdio instances registration. Reported-by: Phani Kiran Kara <phanikiran.kara@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Series-to: u-boot Series-cc: Phani Kiran Kara <phanikiran.kara@gmail.com>
2016-12-04net: rtl8169: remove unneeded definitionAndre Przywara
The rtl8169_intr_mask variable isn't used anywhere in the code, so just remove it to avoid a GCC 6.2 compiler warning. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-04net: e1000: fix indentationAndre Przywara
Apparently the indentation is off here, for the IGB model just want to bail out early. Fix this to avoid both compiler warnings and puzzled readers. Pointed out by GCC 6.2's -Wmisleading-indentation warning. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-02common: miiphyutil: Work and report phy address in hex in mdio cmdMichal Simek
It is confusing that mdio commands work and report phy id as decimal value when mii is working with hex values. For example: ZynqMP> mdio list gem: 21 - TI DP83867 <--> ethernet@ff0e0000 ZynqMP> mdio read ethernet@ff0e0000 0 Reading from bus gem PHY at address 21: 0 - 0x1140 ZynqMP> mii dump 21 0 Incorrect PHY address. Range should be 0-31 ... ZynqMP> mii dump 15 0. (1140) -- PHY control register -- (8000:0000) 0.15 = 0 reset U-Boot normally takes hex values that's why this patch is changing mdio command to handle hex instead of changing mii command to handle decimal values. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-11-29Merge git://git.denx.de/u-boot-mpc85xxTom Rini
2016-11-28drivers: net: keystone_net: add rgmii link type support when parsing dtMugunthan V N
Add support to detect RGMII link interface from link-interface device tree entry. Also rename the existing link type enums so that it provides meaningful interface like SGMII. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reported-by: Sekhar Nori <nsekhar@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-11-28sun8i_emac: Fix mdio read sequencePhilipp Tomsich
To send a parametrized command to the PHY over MDIO, we should write the data first, the trigger the execution by the command register write. Fix the access pattern in our MDIO write routine. Apparently this doesn't really matter with the Realtek PHY on the Pine64, but other PHYs (which require more setup) will choke on the wrong order. [Andre: add commit message] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jagan Teki <jagan@openedev.com>
2016-11-23powerpc: T4080: Drop configuration for T4080York Sun
There is no T4080 target. Drop related macros. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23powerpc: T4240: Remove macro CONFIG_PPC_T4240York Sun
Use CONFIG_ARCH_T4240 from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23powerpc: T4160: Remove macro CONFIG_PPC_T4160York Sun
Use CONFIG_ARCH_T4160 instead. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23powerpc: T2080, T2081: Remove macro CONFIG_PPC_T2080 and CONFIG_PPC_T2081York Sun
Use CONFIG_ARCH_T2080 and CONFIG_ARCH_T2081 instead. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23powerpc: T1042: Remove macro CONFIG_PPC_T1042York Sun
Replace CONFIG_PPC_T1042 with ARCH_T1024 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23powerpc: T1040: Remove macro CONFIG_PPC_T1040York Sun
Replace CONFIG_PPC_T1040 with ARCH_T1040 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23powerpc: T1024: Remove macro CONFIG_PPC_T1024York Sun
Replace CONFIG_PPC_T1024 with ARCH_T1024 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23powerpc: T1023: Remove macro CONFIG_PPC_T1023York Sun
Replace CONFIG_PPC_T1023 with ARCH_T1023 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23powerpc: B4420: Remove macro CONFIG_PPC_B4420York Sun
Replace CONFIG_PPC_B4420 with ARCH_B4420 in Kconfig and clean up existing macros.
generated by cgit (git 2.34.1) at 2025-01-02 16:01:35 +0000