summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-03-05net: ravb: Add R8A77965 M3N entriesMarek Vasut
Add entries for the R8A77965 M3N SoC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-02-26net: phy: smsc: Add SMSC LAN8741 supportArno Steffens
Signed-off-by: Arno Steffens <star@gmx.li> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-02-26net: e1000: Fix e1000_igb semaphore handlingBernhard Messerklinger
Fix commit f1bcad22dd19 ("net: e1000: add support for writing to EEPROM"). Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-02-26NET: designware: fix clock enableEugeniy Paltsev
After commit ba1f966725223 ("net: designware: add clock support") we got NET broken on axs101 and axs103 platforms. Some clock don't support gating so their clock drivers don't implement .enable/.disable callbacks. In such case clk_enable returns -ENOSYS. Also some clock drivers implement .enable/.disable callbacks not for all clock IDs and return -ENOSYS (or -ENOTSUPP) for others. If we have such clock in 'clocks' list of designware ethernet controller node we fail to probe designware ethernet. Fix it. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-02-26phy: Fix style violationsMario Six
Fix some style violations in the generic PHY management code. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-02-26net: phy: marvell 88e151x: Fix handling of bare RGMII interface typeMario Six
Commit 68e6ecadc551 ("net: phy: marvell 88e151x: Fix handling of RGMII interface types") fixed the initialization of 88e151x phys, but made it so that interfaces of type PHY_INTERFACE_MODE_RGMII had both RX and TX delay bits cleared. The default (like in m88e1111s_config) is to have both bits set. Hence, this patch changes the behavior in the PHY_INTERFACE_MODE_RGMII case so that both bits are set. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-02-26net: phy: marvell: Fix style violationsMario Six
Fix some style violations (mostly wrong indentions) in the Marvell PHY driver. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-02-26net: tsec: Make live-tree compatibleMario Six
Make the tsec ethernet driver compatible with a live device tree. Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-02-26net: tsec: Fix memory leak in error pathMario Six
tsec_initialize allocates a private driver structure using malloc. Should the memory allocation of this private structure fail, the function execution is aborted with a return 0, but the previously allocated device structure is never freed, hence leaked. Free the device structure in the error case. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-02-26net: tsec: Fix style violationsMario Six
Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-02-23net: Remove Xilinx ll_temac driverMichal Simek
ll_temac driver was used by Xilinx Microblaze big endian and Xilinx ppc405/ppc440 SoCs. ppc support was removed by: "powerpc: remove 4xx support" (sha1: 98f705c9cefdfdba62c069821bbba10273a0a8ed) and Microblaze BE is not tested for a long time that's why this driver can be removed because none is going to updated it to DM anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-02-18net: sh_eth: Fix DT base address fetchingMarek Vasut
Drop the whole map/unmap_physmem stuff and just use the address already obtained from DT in ofdata_to_platdata(), instead of repeating that, wrongly, in probe. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-02-18net: sh_eth: Fix checkpatch warningMarek Vasut
Fix minor checkpatch warning about udelay(3000) being too long and should be replaced by mdelay(3). Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-02-18net: sh_eth: Return directly from sh_eth_recv_startMarek Vasut
Drop the len variable, it's useless. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-02-18net: sh_eth: Zap port variableMarek Vasut
Inline this variable which is quite useless. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-02-16net: ravb: Initialize PHY in probe() onceMarek Vasut
Reset and initialize the PHY once in the probe() function rather than doing it over and over again is start() function. This requires us to keep the clock enabled while the driver is in use. This significantly reduces the time between transfers as the PHY doesn't have to restart autonegotiation between transfers, which takes forever. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-02-08Kconfig: net: phylib: Phylib should depends on NETMichal Simek
There is no value to enable phylib without networking support. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-02-04net: e1000: implement eth_write_hwaddrHannu Lounento
Implement programming MAC address to the hardware, i.e. external flash seen as EEPROM. MAC address is only written if it differs from what is already stored in flash or if reading the current MAC address fails. Signed-off-by: Hannu Lounento <hannu.lounento@ge.com> CC: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-04net: e1000: split e1000_read_mac_addrHannu Lounento
Split the implementation of e1000_read_mac_addr into eeprom and register versions called by e1000_read_mac_addr. This allows for calling e1000_read_mac_addr when MAC address is needed with no constraints where it is read from, and for calling the register and, especially, the eeprom version directly in order to specify where to read the address from. Signed-off-by: Hannu Lounento <hannu.lounento@ge.com> CC: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-04net: e1000: add support for writing to EEPROMHannu Lounento
Port functions for writing to EEPROM, updating the checksum and committing data to flash from the Linux kernel igb driver. Functions were ported from Linux 4.8-rc2 (694d0d0bb20). Signed-off-by: Hannu Lounento <hannu.lounento@ge.com> CC: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Reviewed-by: Stefano Babic <sbabic@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-04net: fec: fix build warnings for 64bits supportYe Li
When building for 64bits system, we get some warnings about type cast between pointer and integer. This patch eliminates the warnings by using ulong/long type which is 32bits on 32bits system or 64bits on 64bits system. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-04net: fec: do not access reserved register for i.MX8MPeng Fan
The MIB RAM and FIFO receive start register does not exist on i.MX8M. Accessing these register will cause system hang. Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-01-31Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2018-01-30driver: fsl-mc: Perform fsl-mc fdt fixup for lazyapply dplYogesh Gaur
For for case of lazyapply method, API fdt_fixup_board_enet() gets invoked before DPL being deployed. This leads to an issue that fsl-mc fdt fixup status marked as fail and dprc driver didn't get registered in linux boot. Fixes this issue by calling fdt_fixup_board_enet() for case when DPL is deployed successfully in lazyapply method. Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-29mvpp2: Fix warning over 32bit vs 64bit targetsTom Rini
When we have a driver that is used on both 32bit and 64bit targets and we are talking about address space we cannot use u64 nor u32 and instead need to use phys_addr_t. Fixes: 377883f16d36 ("net: mvpp2x: fix phy connected to wrong mdio issue") Cc: Stefan Chulski <stefanc@marvell.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-28net: gmac_rockchip: Add support for the RK3228 GMACDavid Wu
The GMAC in the RK3228 once again is identical to the incarnation in the RK3288 and the RK3399, except for where some of the configuration and control registers are located in the GRF. This adds the RK3368-specific logic necessary to reuse this driver. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28net: gmac_rockchip: Add rk3328 gmac supportDavid Wu
The GMAC2IO in the RK3328 once again is identical to the incarnation in the RK3288 and the RK3399, except for where some of the configuration and control registers are located in the GRF. This adds the RK3328-specific logic necessary to reuse this driver. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28net: gmac_rockchip: Add support for the RV1108 GMACDavid Wu
The rv1108 GMAC only support rmii interface, so need to add the set_rmii() ops. Use the phy current interface to set rmii or rgmii ops. At the same time, need to set the mac clock rate of rmii with 50M, the clock rate of rgmii with 125M. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-27Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-shTom Rini
2018-01-27net: sh_eth: Add DM and DT supportMarek Vasut
Add DM capable code into the SH ethernet driver and support probing both from DT and pdata. The legacy non-DM, non-DT support is retained as there are still systems in the tree which are not DM or DT capable. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-01-27net: sh_eth: Clump legacy functions togetherMarek Vasut
Move the legacy functions around, so that they can be wrapped in a massive ifdef CONFIG_DM_ETH once DM support is added. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-01-27net: sh_eth: Split sh_eth_initMarek Vasut
Split sh_eth_init() function into smaller chunks, which can be called from both DM and non-DM code while handling the specifics of both configurations. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-01-27net: sh_eth: Separate out MAC address programmingMarek Vasut
Pull out the code for writing MAC address into the NIC into a separate function, so it can be reused by both DM and non-DM code. This is done in preparation for DM support, which handles MAC address programming separately. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-01-27net: sh_eth: Split sh_eth_recvMarek Vasut
Split sh_eth_recv into two functions, one which checks whether a packet was received and one which handles the received packet. This is done in preparation for DM support, which handles these two parts separately. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-01-27net: sh_eth: Pass sh_eth_dev aroundMarek Vasut
Pass sh_eth_dev structure around instead of eth_device, since the later is specific to the legacy networking support. This change is done in preparation for the DM addition. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-01-27net: sh_eth: Unify CONFIG_R8A779[01234] as CONFIG_RCAR_GEN2Marek Vasut
Use the common RCAR_GEN2 config option instead of enumerating each SoC and having a lengthy ifdef clause. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-01-27net: ravb: staticize ravb_startMarek Vasut
Cosmetic fix, make ravb_start() static. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-01-26Merge git://git.denx.de/u-boot-spiTom Rini
2018-01-24wait_bit: use wait_for_bit_le32 and remove wait_for_bitÁlvaro Fernández Rojas
wait_for_bit callers use the 32 bit LE version Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-15phy: atheros: set auto-negotiation for AR8021Zhao Qiang
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15net: sh-eth: Add to Kconfig and convertNobuhiro Iwamatsu
This adds SH_ETHER to drivers/net/Kconfig and convert to Kconfig. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15net: sh-eth: Fix misaligned cache operation warningNobuhiro Iwamatsu
When we using network on board using sh-eth, it prints a lot of "CACHE: Misaligned operation at range" messages. This commit fixes this problem. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15net: sh-eth: Change read/write() param to struct sh_eth_infoNobuhiro Iwamatsu
This changes Change structure used in sh_eth_read and sh_eth_write function from struct sh_eth_dev to struct sh_eth_info. This is necessary to convert to Driver Model. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15net: sh-eth: Remove bd_t from sh_eth_config()Nobuhiro Iwamatsu
bd_t is not used in sh_eth_config(). This deletes bd_t from sh_eth_config() Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15net: sh-eth: Fix coding style checked by checkpatch.plNobuhiro Iwamatsu
This fixes the chord style checked by checkpatch.pl. Details of change details are as follows: - Fix typo Change from alligned to aligned. - Remove whitespace before ',' - Add spaces preferred around that '|' - Fix missing a blank line after declarations - Remove space after a cast declaration - Fix format of block comments - Add a blank line after function/struct/union/enum declarations Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15net: phy: b53: Add b53_reg read/write commandsFlorian Fainelli
Add a b53_reg read/write command which allows inspecting the switch registers. Because the Broadcom BCM53xx registers have different sizes, we need to split the accesses in 8, 16, 32, 48 or 64 bits to obtain expected results. Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-01-15net: designware: Pad small packetsFlorian Fainelli
Make sure that we pad small packets to a minimum length of 60 bytes (without FCS). This is necessary to interface with Ethernet switches that will reject RUNT frames unless padded correctly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-01-15net: phy: Add Broadcom BCM53xx switch driverFlorian Fainelli
Add a minimalistic Broadcom BCM53xx (roboswitch) switch driver similar to the Marvell MV88E617x. This takes care of configuring the minimum amount out of the switch hardware such that each user visible port (configurable) and the CPU port can forward packets between each other while preserving isolation with other ports. This is useful for e.g: the Lamobo R1 board featuring a Broadcom BCM53125 switch. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-01-15net: designware: add clock supportPatrice Chotard
This implementation manages several clocks, disable and free all of them in case of error during probe and in remove callback. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15net: mvneta - Fixed recv() when multiple packets have arrived.Jason Brown
This patch fixes a problem in the mvneta driver where if more than one packet arrives between calls to mvneta_recv(), the additional descriptors will be marked as free even though only one descriptor has been read and processed from the receive queue. This causes the additional packet(s) to be delayed until the next packet arrives. >From this point on all packets will be delayed because the receive queue will contain unprocessed packets but the hardware shows no busy descriptors. Signed-off-by: Jason Brown <jason.brown@apcon.com> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit (git 2.34.1) at 2024-12-27 00:26:54 +0000