summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2020-07-07net: dwc_eth_qos: update the compatible supported for STM32Patrick Delaunay
Update the compatible associated with the STM32 MPU glue in the DWC ethernet driver. The supported compatible is the specific "st,stm32mp1-dwmac" as indicated in Linux binding Documentation/devicetree/bindings/net/stm32-dwmac.txt and not the "snps,dwmac-4.20a" only used to the select IP version. This glue is implemented in Linux kernel in: drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c For information in stm32mp151.dtsi, the 2 compatibles are supported: ethernet0: ethernet@5800a000 { compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; ... }; Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-06-30Merge tag 'mips-pull-2020-06-29' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mips into next - net: pcnet: cleanup and add DM support - Makefile: add rule to build an endian-swapped U-Boot image used by MIPS Malta EL variants - CI: add Qemu tests for MIPS Malta
2020-06-29net: pcnet: Add Kconfig entriesMarek Vasut
Add Kconfig entries for the pcnet driver and convert MIPS malta to use those. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Add DM supportMarek Vasut
With all the changes in place, add support for DM into the pcnet driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Split common and non-DM functionsMarek Vasut
Pull the common parts of functions out so they can be reused by both DM and non-DM code paths. The recv() function had to be reworked to fit into this scheme and this means it now only receives one packet at a time instead of spinning in an endless loop. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Wrap name and enetaddr into private dataMarek Vasut
Instead of using the non-DM-only name and enetaddr in struct eth_device, add pointers into the private data which can either point to that non-DM name or a DM one later on. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Wrap iobase into private dataMarek Vasut
Instead of using the non-DM-only iobase in struct eth_device, add one into the private data to make DM and non-DM operation possible. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Pass private data through dev->privMarek Vasut
Get rid of the global point to private data, and rather pass it thought dev->priv. Also remove the unnecessary check for lp being non-NULL, since it is always NULL at this point. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Wrap devbusfn into private dataMarek Vasut
Instead of using eth_device priv for this PCI devbusfn, free it so it could be used for driver private data, and wrap devbusfn into those driver private data. Note that using the name dev for the variable is a trick left for later, when DM support is in place, so dm_pci_virt_to_mem() can be used with minimal ifdeffery. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Drop useless forward declarationsMarek Vasut
Remove those as they are not needed anymore. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Move initialize function at the endMarek Vasut
Move the function at the end of the driver, so we could drop various forward declarations later. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Move private data allocation to initializeMarek Vasut
The private data allocation does not have to be done every time the NIC is initialized at run time, move the allocation to initialize function, which means it will be done only once when the driver starts. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Replace memset+malloc with callocMarek Vasut
This combination of functions can be replaced with calloc(), make it so. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Simplify private data allocationMarek Vasut
The current code is horribly complex. Both the RX and TX buffer descriptors are 16 bytes in size, the init block is 32 bytes in size, so simplify the code such that the entire private data of the driver are allocated cache aligned and the RX and TX buffer descriptors are part of the private data. This removes multiple malloc calls and cache flushes. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Use PCI_DEVICE() to define PCI device compat listMarek Vasut
Use this macro to fully fill the PCI device ID table. This is mandatory for the DM PCI support, which checks all the fields. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Drop PCNET_HAS_PROMMarek Vasut
All of one PCNET users has this option set, make this default and drop this config option. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Drop typedef struct pcnet_priv_tMarek Vasut
Use struct pcnet_priv all over the place instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*Lukasz Majewski
This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-25Merge tag 'xilinx-for-v2020.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.10 Versal: - xspi bootmode fix - Removing one clock from clk driver - Align u-boot memory setting with OS by default - Map TCM and OCM by default ZynqMP: - Minor DT improvements - Reduce console buffer for mini configurations - Add fix for AMS - Add support for XDP platform Zynq: - Support for AES engine - Enable bigger memory test by default - Extend documentation for SD preparation - Use different freq for Topic miami board mmc: - minor GD pointer removal net: - Support fixed-link cases by zynq gem - Fix phy looking loop in axi enet driver spi: - Cleanup global macros for xilinx spi drivers firmware: - Add support for pmufw reloading fpga: - Improve error status reporting common: - Remove 4kB addition space for FDT allocation
2020-06-24net: xilinx: axi_emac: Fix endless loop when no PHYs are connectedPatrick van Gelder
The index used to iterate over the possible PHYs in axiemac_phy_init was an unsigned int and decremented. Therefor it was always >= 0 and never exited the loop. Signed-off-by: Patrick van Gelder <patrick.vangelder@nl.bosch.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24net: gem: Disable PCS autonegotiation in case of fixed-linkMichal Simek
Disable PCS autonegotiation if fixed-link node is present in device tree. This way systems with multiple GEM instances with a combination of SGMII-fixed and SGMII-PHY will work. Reported-by: Goran Marinkovic <goran.marinkovic@psi.ch> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-22net: fec: Allow the PHY node to be retrievedFabio Estevam
As we move towards driver model, it is required to let the FEC driver know how to properly deal with an Ethernet PHY subnode in the device tree. For example: &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; phy-handle = <&phy>; phy-mode = "rgmii-id"; phy-reset-duration = <2>; phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; status = "okay"; mdio { #address-cells = <1>; #size-cells = <0>; phy: ethernet-phy@0 { reg = <0>; qca,clk-out-frequency = <125000000>; }; }; }; Currently the PHY node pointer is incorrectly associated with the Ethernel controller instead of the PHY node itself. This causes the PHY properties, such as "qca,clk-out-frequency" in the example above to not get parsed. Fix this problem by populating the phy_of_node node. Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Tom Rini <trini@konsulko.com>
2020-06-22phy: atheros: ar8035: Fix clock output calculationFabio Estevam
The clock ouput frequency is calculated incorrectly for AR8035 due to wrong masking of priv->clk_25m_reg and priv->clk_25m_mask. This same issue has been already fixed in the kernel by: commit b1f4c209d84057b6d40b939b6e4404854271d797 Author: Oleksij Rempel <o.rempel@pengutronix.de> Date: Wed Apr 1 11:57:32 2020 +0200 net: phy: at803x: fix clock sink configuration on ATH8030 and ATH8035 The masks in priv->clk_25m_reg and priv->clk_25m_mask are one-bits-set for the values that comprise the fields, not zero-bits-set. This patch fixes the clock frequency configuration for ATH8030 and ATH8035 Atheros PHYs by removing the erroneous "~". To reproduce this bug, configure the PHY with the device tree binding "qca,clk-out-frequency" and remove the machine specific PHY fixups. Fixes: 2f664823a47021 ("net: phy: at803x: add device tree binding") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Apply the same fix in the U-Boot driver. Tested on a i.MX6 Hummingboard. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Michael Walle <michael@walle.cc> Tested-by: Tom Rini <trini@konsulko.com>
2020-06-20Merge branch 'net' of https://gitlab.denx.de/u-boot/custodians/u-boot-sh ↵Tom Rini
into next - Convert pcnet and eepro100 ethernet drivers to DM
2020-06-18net: pcnet: Add Kconfig entriesMarek Vasut
Add Kconfig entries for the pcnet driver and convert MIPS malta to use those. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-18net: pcnet: Add DM supportMarek Vasut
With all the changes in place, add support for DM into the pcnet driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-18net: pcnet: Split common and non-DM functionsMarek Vasut
Pull the common parts of functions out so they can be reused by both DM and non-DM code paths. The recv() function had to be reworked to fit into this scheme and this means it now only receives one packet at a time instead of spinning in an endless loop. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-18net: pcnet: Wrap name and enetaddr into private dataMarek Vasut
Instead of using the non-DM-only name and enetaddr in struct eth_device, add pointers into the private data which can either point to that non-DM name or a DM one later on. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-18net: pcnet: Wrap iobase into private dataMarek Vasut
Instead of using the non-DM-only iobase in struct eth_device, add one into the private data to make DM and non-DM operation possible. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-18net: pcnet: Pass private data through dev->privMarek Vasut
Get rid of the global point to private data, and rather pass it thought dev->priv. Also remove the unnecessary check for lp being non-NULL, since it is always NULL at this point. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-18net: pcnet: Wrap devbusfn into private dataMarek Vasut
Instead of using eth_device priv for this PCI devbusfn, free it so it could be used for driver private data, and wrap devbusfn into those driver private data. Note that using the name dev for the variable is a trick left for later, when DM support is in place, so dm_pci_virt_to_mem() can be used with minimal ifdeffery. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-18net: pcnet: Drop useless forward declarationsMarek Vasut
Remove those as they are not needed anymore. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-18net: pcnet: Move initialize function at the endMarek Vasut
Move the function at the end of the driver, so we could drop various forward declarations later. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-18net: pcnet: Move private data allocation to initializeMarek Vasut
The private data allocation does not have to be done every time the NIC is initialized at run time, move the allocation to initialize function, which means it will be done only once when the driver starts. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-18net: pcnet: Replace memset+malloc with callocMarek Vasut
This combination of functions can be replaced with calloc(), make it so. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-18net: pcnet: Simplify private data allocationMarek Vasut
The current code is horribly complex. Both the RX and TX buffer descriptors are 16 bytes in size, the init block is 32 bytes in size, so simplify the code such that the entire private data of the driver are allocated cache aligned and the RX and TX buffer descriptors are part of the private data. This removes multiple malloc calls and cache flushes. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-18net: pcnet: Use PCI_DEVICE() to define PCI device compat listMarek Vasut
Use this macro to fully fill the PCI device ID table. This is mandatory for the DM PCI support, which checks all the fields. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-18net: pcnet: Drop PCNET_HAS_PROMMarek Vasut
All of one PCNET users has this option set, make this default and drop this config option. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-18net: pcnet: Drop typedef struct pcnet_priv_tMarek Vasut
Use struct pcnet_priv all over the place instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-18net: eepro100: Add Kconfig entriesMarek Vasut
Add Kconfig entries for the eepro100 driver and convert various boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Add DM supportMarek Vasut
Add support for driver model to the driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Split common parts of non-DM functions outMarek Vasut
Split the common code from the non-DM code, so it can be reused by the DM code later. As always, the recv() function had to be split into the actual receiving part and free_pkt part to fit with the DM. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Drop bd_t pointer from read_hw_addr()Marek Vasut
The pointer is unused, so drop it. Rename the function to start with the eepro100_ prefix. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Add RX/TX rings into the private dataMarek Vasut
The RX/TX DMA descriptor rings are per-device-instance private data, so move them into the private data. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Pass device private data into mdiobusMarek Vasut
Instead of doing ethernet device lookup by name every time there is an MDIO access, pass the driver private data via mdiobus priv to the MDIO bus accessors. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Pass device private data aroundMarek Vasut
This patch replaces the various uses of struct eth_device for accessing device private data with struct eepro100_priv, which is compatible both with DM and non-DM operation. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Introduce device private dataMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Pass PCI BDF into bus_to_phys()/phys_to_bus()Marek Vasut
This is a trick in preparation for adding DM support. By passing in the PCI BDF into the bus_to_phys()/phys_to_bus() macros and calling that dev, we can substitute dev with udevice when DM support lands and do minor adjustment to the macros to support both DM and non-DM operation. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Drop inline keywordMarek Vasut
Drop the inline keyword from the static functions, the compiler has a much better overview and can decide how to inline those functions much better. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18net: eepro100: Fix EE_*_CMD macrosMarek Vasut
Those macros depended on specific variable names to be declared at their usage sites, fix this by adding an argument to those macros and also protect the argument with braces. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-30 23:03:19 +0000