summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-01-28net/designware: do explicit port selection for 1Gb modeAlexey Brodkin
Current implementation only sets "port select" bit for non-1Gb mode. That works fine if GMAC has just exited reset state but we may as well change connection mode in runtime. Then we'll need to reprogram GMAC for that new mode of operation and if previous mode was 10 or 100 Mb and new one is 1 Gb we'll need to reset port mode bit. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Sonic Zhang <sonic.zhang@analog.com> cc: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28drivers/net/phy: introduce phy_set_supported()Alexey Brodkin
This new function will allow MAC drivers to override supported capabilities of the phy. It is required when MAC cannot handle all speeds supported by phy. For example phy supports up-to 1Gb connections while MAC may only work in modes up to 100 or even 10 Mbit/sec. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28net: phy: genphy: Allow overwriting featuresSascha Hauer
of_set_phy_supported allows overwiting hardware capabilities of a phy with values from the devicetree. This does not work with the genphy driver though because the genphys config_init function will overwrite all values adjusted by of_set_phy_supported. Fix this by initialising the genphy features in the phy_driver struct and in config_init just limit the features to the ones the hardware can actually support. The resulting features are a subset of the devicetree specified features and the hardware features. This is a copy of the patch from Linux kernel, see http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=c242a47238fa2a6a54af8a16e62b54e6e031d4bc Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28net: phy: ensure Gigabit features are masked off if requestedFlorian Fainelli
When a Gigabit PHY device is connected to a 10/100Mbits capable Ethernet MAC, the driver will restrict the phydev->supported modes to mask off Gigabit. If the Gigabit PHY comes out of reset with the Gigabit features set by default in MII_CTRL1000, it will keep advertising these feature, so by the time we call genphy_config_advert(), the condition on phydev->supported having the Gigabit features on is false, and we do not update MII_CTRL1000 with updated values, and we keep advertising Gigabit features, eventually configuring the PHY for Gigabit whilst the Ethernet MAC does not support that. This patches fixes the problem by ensuring that the Gigabit feature bits are always cleared in MII_CTRL1000, if the PHY happens to be a Gigabit PHY, and then, if Gigabit features are supported, setting those and updating MII_CTRL1000 accordingly. This is a copy of patch from Linux kernel, see http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=5273e3a5ca94fbeb8e07d31203069220d5e682aa Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28net: tsec: Use priv->tbiaddr to initialize TBI PHY addressBin Meng
Add a new member 'tbiaddr' to tsec_private struct. For non-DM driver, it is initialized as CONFIG_SYS_TBIPA_VALUE, but for DM driver, we can get this from device tree. Update the bindings doc as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28net: tsec: Add driver model ethernet supportBin Meng
This adds driver model support to Freescale TSEC ethernet driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28net: tsec: Use tsec_private pointer as the parameter for internal routinesBin Meng
For internal routines like redundant_init(), startup_tsec() and init_phy(), change to use tsec_private pointer as the parameter. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28net: tsec: Adjust orders to avoid forward declaration of tsec_send()Bin Meng
Adjust static functions in a proper order so that forward declaration of tsec_send() can be avoided. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28net: tsec: Move rxbd and txbd to struct tsec_privateBin Meng
rxbd and txbd are declared static with 8 byte alignment requirement, but they can be put into struct tsec_private as well and are natually aligned to 8 byte. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28net: tsec: Move rx_idx and tx_idx to struct tsec_privateBin Meng
At present rx_idx and tx_idx are declared as static variables in the driver codes. To support multiple interfaces, move it to struct tsec_private. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28net: tsec: fsl_mdio: Fix several cosmetic issuesBin Meng
Clean up the tsec and fsl_mdio driver codes a little bit, by: - Fix misuse of tab and space here and there - Use correct multi-line comment format - Replace license identifier to GPL-2.0+ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28drivers: net: vsc9953: Add LAG supportCodrin Ciubotariu
You can now configure LAG on VSC9953's ports using the command: ethsw [port <port_no>] aggr {[help] | show | <lag_group_no>} A port must belong to a single LAG. By default, a port belongs to a LAG equal to the port's number. For each frame, a hash will be calculated based on Source/Destination MAC addresses, Source/Destination IP(v4/v6) addresses, Source/Destination ports. This hash will be used to select a single egress port from LAG. This also assures that frames from the same flow will always have the same egress port. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28drivers: net: vsc9953: Fix FDB aging timeCodrin Ciubotariu
By default, the aging period is set to 0, so the dynamic FDB entries are never removed. This patch sets the aging time to 300 seconds. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28net: phy: do not read configuration register on resetStefan Agner
When doing a software reset, the reset flag should be written without other bits set. Writing the current state will lead to restoring the state of the PHY (e.g. Powerdown), which is not what is expected from a software reset. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Michael Welling <mwelling@ieee.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
2016-01-27driver: net: fsl-mc: Remove portal id hard-codingPrabhakar Kushwaha
Management Complex firmware 9.0 has fixed the issue of dprc_destroy_container i.e. the used portal is not return to the free pool. Which was resulting in error ethernet driver want to use this portal via either DPL or dynamically in Linux. Hard-coding of portal id is removed. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27driver: net: ldpaa: Add debug info of printing DPMAC statsPrabhakar Kushwaha
Add debug information prints to provide DPMAC statistics - Number of bytes received - Number of received and discard frames - Number of bytes transferred - Number of frames transferred etc. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27driver: net: ldpaa: Increase num of buffers for a poolPrabhakar Kushwaha
Management Complex FW 9.0 set the hardware depletion to be 20 buffers in order to support multiple pools in DPNI. This requires driver to fill the pool with at least 21 to be able to receive frames. So, Increase number of buffers for a pool. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27driver: net: ldpaa: Report back only error frames for txPrabhakar Kushwaha
Management Complex FW 9.0 puts a new requirement to provide Tx confirmation and error queue configuration by calling dpni_set_tx_conf API. Configure report of only error frames for a tx frame. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27driver: net: fsl-mc: Prepare extended cfg for DPNI createPrabhakar Kushwaha
Management Complex FW 9.0 puts a new requirement to prepare extended parameters which should be provided as input in dpni_create. extended parameters includes traffic class and IP reassembly configurations. So prepare extended parameters with default "0" as input for dpni_create. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27driver: net: fsl-mc: flib changes for MC FW 9.0.0Prabhakar Kushwaha
MC firmware version 9.0.0 contains - Support of new APIs - Update in existing APIs - Change in Major and minor version of DPAA2 objects This patch contains modifications in FLIB files to support new MC firmware version. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27driver: net: fsl-mc: Add version check for MC objectsPrabhakar Kushwaha
Check and compare version of management complex's object with the version supported by Freescale ldpaa2 ethernet driver. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27net: xilinx_ll_temac: Fix string overflowRicardo Ribalda Delgado
Size of this snprintf "lltemac.%lx" is bigger than 16 characters. Replacing it with "ll_tem.%lx" Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27net: zynq: Change MDC setup for arm64Michal Simek
MDC setting depends on pclk input clocks which varies across SoC. This driver is used by xilinx zynq and zynqmp SOC. Input clock frequence on silicon is 125MHz where divider 64 put frequency below 2.5MHz requires by spec (125/64=1.95). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27net: phy: ti: Enable automatic crossover modeMichal Simek
Enable automatic crossover cable detection. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Move emaclite to KconfigMichal Simek
Add PHYLIB and MII dependencies and enable it by default for Microblaze. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Let core to handle received packetMichal Simek
Pass pointer to core to handle packet. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27net: emaclite: Rename start and stop functionsMichal Simek
Rename start and stop functions to align with DM functions names. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27net: emaclite: Move driver to DMMichal Simek
Move driver to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Use indirect access in emaclite_recvMichal Simek
When IP is configured with pong buffers, IP is receiving packets to ping and then to pong buffer and than ping again. The original logic in the driver remains there that when ping buffer is free, pong buffer is checked too and return if both are free. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27net: emaclite: Use indirect reg access in sendMichal Simek
The original logic in the driver was exchanging buffers which are used for sending packet and tx_ping and tx_pong buffers were exchanged all the time to ensure that IP has enough time to send the packet out. Based on this "feature" send function was using nextbuffertouse variable to save which buffer should be used. Before this algorithm was called driver checked that there is free buffer available. This checking remains in the driver but driver tries to use tx_ping first if available. If not, tx_pong buffer is used instead. To reach this code the original condition is met that at least one of the buffer should be available. Testing doesn't show any performance drop when this patch is applied. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Remove XEL_TSR_XMIT_ACTIVE_MASK flagMichal Simek
This flag is not documented anywhere in the latest documentation that's why this patch removes it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Fix logic around available TX buffersMichal Simek
Simplify logic how to find out if there is free TX buffer. Both buffers are checked all the time that's why logic around order can be removed. Also add check when only one buffer is available. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Use indirect register access for TX resetMichal Simek
Move to use indirect register access when timeout expires for resetting TX buffers. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Use indirect register access for rx_ping/pongMichal Simek
Do initialization via indirect register access. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27net: emaclite: Use indirect register access for tx_ping/pongMichal Simek
Do initialization via indirect register access. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Convert MDIO to use register offsetMichal Simek
Use u-boot coding style how to setup and access MDIO bus. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Add MDIO support to driverMichal Simek
Add MDIO support before move to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: emaclite: Remove ancient OF probe functionMichal Simek
Prepare for DM move. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: Add axi emac to KconfigMichal Simek
Also add dependency on PHYLIB and MII which is required. Clean PHYLIB dependency from the driver too. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: axi_emac: Rename start, stop, write_hwaddr functionsMichal Simek
Rename few functions to fit to the new name convention used by DM. Suggested-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27net: axi_emac: Split recv from free_pktMichal Simek
Call net_process_received_packet() by core. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: axi_emac: Enable access to MDIO in probeMichal Simek
Detect phy when driver probes. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: axi_emac: Move driver to DMMichal Simek
Move driver to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: axi_emac: Pass private structure where possibleMichal Simek
Use axidma_priv instead of ethdevice in preparation of the DM move. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27net: axi_emac: Pass private structure to phyread/phywriteMichal Simek
Prepare for move to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: axi_emac: Put iobase to private structureMichal Simek
Saving iobase directly to private structure helps with moving to DM. There is an option to load iobase from pdata but it is additional load. Pointer to private structure is available all the time. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: axi_emac: Pass directly pointer to register spaceMichal Simek
Simplify mdio_wait function by passing regs directly. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: axi_emac: Show phy address instead of register contentMichal Simek
Fix debug message. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27net: axi_emac: Fix parentheses around operand !Michal Simek
Fix these compilation warning by proper grouping: In function 'axi_dma_init': drivers/net/xilinx_axi_emac.c:391:7: warning: suggest parentheses around operand of '!' or change '&' to '&&' or '!' to '~' [-Wparentheses] if (!(in_be32(&priv->dmatx->control) | ^ In function 'axiemac_send': drivers/net/xilinx_axi_emac.c:501:21: warning: suggest parentheses around operand of '!' or change '&' to '&&' or '!' to '~' [-Wparentheses] while (timeout && (!in_be32(&priv->dmatx->status) & Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>