summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2017-03-28arm: fsl-layerscape: Move QSGMII wriop_init to SoC filePrabhakar Kushwaha
MAC number used per QSGMII is not fixed. It may wary from SoC to SoC. So move QSGMII wriop_init_dpmac() to SoC file. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-03-23mvebu: neta: a37xx: Add fixed link support to neta driverKonstantin Porotchkin
Add support for fixed link to NETA driver. This feature requreed for proper support of SFP modules and onboard connected devices like Ethernet switches Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Terry Zhou <bjzhou@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-03-23mvebu: neta: Add support for board init functionKonstantin Porotchkin
Add ability to use board-specific initialization flow to NETA driver (for instance Ethernet switch bring-up) Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-03-16Merge tag 'xilinx-for-v2017.05' of git://www.denx.de/git/u-boot-microblazeTom Rini
Xilinx changes for v2017.05 - Move to DM clk driver - Add clk support for zynq_sdhci
2017-03-14driver: net: fsl-mc: Update calculation of MC RAMYork Sun
Since the reserved RAM is tracked by gd->arch.resv_ram, calculation of MC memory blocks can be simplified. The MC RAM is guaranteed to be aligned by the reservation process. Signed-off-by: York Sun <york.sun@nxp.com> CC: Priyanka Jain <priyanka.jain@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-03-14armv8: layerscape: Rewrite memory reservationYork Sun
For ARMv8 Layerscape SoCs, secure memory and MC memorey are reserved at the end of DDR. DDR is spit into two or three banks. This patch reverts commit aabd7ddb and simplifies the calculation of reserved memory, and moves the code into common SoC file. Secure memory is carved out first. DDR bank size is reduced. Reserved memory is then allocated on the top of available memory. U-Boot still has access to reserved memory as data transferring is needed. Device tree is fixed with reduced memory size to hide the reserved memory from OS. The same region is reserved for efi_loader. Signed-off-by: York Sun <york.sun@nxp.com>
2017-03-07net: zynq_gem: Fix masking of supported phydev featuresNathan Rossi
When the zynq_gem driver initializes the phy it sets the supported features that the phy can support and advertise. However instead of masking the supported features such that it limits the available features it sets the phy to have the exact supported features of the zynq_gem. This is problematic as it will enable features that a phy does not have or cannot advertise. Specifically this appears as an issue when using a phy that is only capable of 10/100, but the zynq_gem driver will override this and try to enable and advertise 10/100/1000. Reported-by: Arno Steffens <star@gmx.li> Fixes: 80243528ef ("net: gem: Fix gem driver on 1Gbps LAN") Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Tested-by: Arno Steffens <star@gmx.li> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2017-03-01net: macb: Fix ETH not found when clock not supportWenyou Yang
For the boards such as smartweb on which the clock driver isn't supported, the ethernet fail to be found when booting up with the below log. ---8<--- Net: No ethernet found. --->8--- Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-27drivers/net/Kconfig: Correct use of apostropheTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-02-17zynq: Move zynq to clock frameworkStefan Herbrechtsmeier
Move the zynq to clock framework and remove unused functions as well as the CONFIG_ZYNQ_PS_CLK_FREQ configuration. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-17net: zynq: Add clk framework support to zynq ethernet driverStefan Herbrechtsmeier
If available use the clock framework to set the tx clock rate of the zynq ethernet controller. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-17net: zynq: Don't overwrite gem_rclk_ctrl with default valueStefan Herbrechtsmeier
The gem[0-1]_rclk_ctrl registers control the source of the rx clock, control and data signals and configure via ps7_init function. Don't overwrite the register with the default value. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-09Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini
2017-02-08net: phy: MSCC Add Support for VSC8530-VSC8531-VSC8540-VSC8541John Haechten
Signed-off-by: John Haechten <john.haechten@microsemi.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-08Merge git://git.denx.de/u-boot-dmTom Rini
2017-02-08drivers: net: cpsw: Fix reading of mac address for am43 SoCsLokesh Vutla
cpsw driver tries to get macid for am43xx SoCs using the compatible ti,am4372. But not all variants of am43x uses this complatible like epos evm uses ti,am438x. So use a generic compatible ti,am43 to get macid for all am43 based platforms. Tested-by: Aparna Balasubramanian <aparnab@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-02-08dm: core: Replace of_offset with accessorSimon Glass
At present devices use a simple integer offset to record the device tree node associated with the device. In preparation for supporting a live device tree, which uses a node pointer instead, refactor existing code to access this field through an inline function. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-07drivers: net: Provide Kconfig menu for PHYLIBAlex
Provide the necessary Kconfig symbols so that PHYLIB support may be enabled in Kconfig, as opposed to needing to #define these symbols in C source headers. BITBANGMII and MV88E6352_SWITCH are left out of the PHYLIB submenu as they don't seem to explicitly depend on it (i.e. they do not use the phy_driver class). Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: phy: Improve the Marvell 151x constantsJoe Hershberger
Use some constants for the phy configuration instead of so many magic numbers. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: fec_mxc: Fix corruption of device tree blobDaniel Strnad
Modifying content of dev->name leads to the device tree corruption because it points to the node name located there. Signed-off-by: Daniel Strnad <strnadda@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: designware: Fix for use with current Linux device tree for Meson GXHeiner Kallweit
In Uboot for Meson GX the compatible string in meson-gxbb.dtsi so far is: compatible = "amlogic,meson6-dwmac", "snps,dwmac"; On Linux in the same dt file it's compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; To avoid breaking ethernet with the next DT synch from Linux to U-Boot (planned as prerequisite for adding Meson GX MMC driver to U-Boot) add "amlogic,meson-gx-dwmac" to the compatibility list in the designware driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: phy: dp83867: Add support for MAC impedance configurationMugunthan V N
Add support for programmable MAC impedance configuration and fix typo in DT impedance parameters names. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: phy: vitesse: Fix cis8204 RGMII_ID codePhil Edworthy
Commit 79e86ccb3786c8b20004db3fa10a70049456f580 "vitesse: remove duplicated argument to ||" correctly removed a redundant check. However, I believe that the original code was simply wrong, and should have been checking against RGMII_ID. To fix this and avoid similar problems in the future, use the phy_interface_is_rgmii helper function. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: phy: Marvell: Use phy_interface_is_rgmii helper functionPhil Edworthy
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: phy: Add support for Marvell M88E1512Phil Edworthy
This device also works with the 88E1518 code, so we just adjust the UID mask accordingly. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: phy: Fix mask so that we can identify Marvell 88E1518Phil Edworthy
The mask for the 88E1510 meant that the 88E1518 code would never be used. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: phy: ti: Fix dp83867 RGMII_TXID interface pathPhil Edworthy
There is code that is specifically for RGMII_TXID interface, but this will never get used because the code checks that the RGMII interface is RGMII_ID to RGMII_RXID; RGMII_TXID is after this. To fix this and avoid similar problems in the future, use the phy_interface_is_rgmii helper function. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: macb: Remove redundant #ifdef CONFIG_DM_ETHWenyou Yang
Remove the redundant #ifdef CONFIG_DM_ETH/#endif. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: macb: Add the clock supportWenyou Yang
Due to introducing the at91 clock driver, add the clock support. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: Kconfig: Add CONFIG_MACB optionWenyou Yang
Add CONFIG_MACB option in KConfig to be used to select the Cadence MACB Ethernet driver. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2017-02-03Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/ls1046aqds_defconfig configs/ls1046aqds_nand_defconfig configs/ls1046aqds_qspi_defconfig configs/ls1046aqds_sdcard_ifc_defconfig configs/ls1046aqds_sdcard_qspi_defconfig configs/ls1046ardb_emmc_defconfig configs/ls1046ardb_qspi_defconfig configs/ls1046ardb_sdcard_defconfig
2017-02-01net: phy: Support Marvell 88E1680Dirk Eibach
Add support for Marvell 88E1680 Integrated Octal 10/100/1000 Mbps Energy Efficient Ethernet Transceiver. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-01-31drivers: net: fsl-mc: Fixup MAC addresses in DPCBogdan Purcareata
Fixup port_mac_address property in MC DPC with values from the u-boot environment. Since u-boot already reads the environment MAC addresses when probing the PHYs, use these values. The u-boot environment MAC addresses take precedence over any eventual ones defined in the DPC, except for the case where they are randomly assigned (no u-boot env value declared for port). The patch assumes the "/board_info/ports/" node is present in the DPC. Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> [York S: Fix several indentations] Reviewed-by: York Sun <york.sun@nxp.com>
2017-01-28net: phy: add SMSC LAN8742 phyMichael Kurz
This patch adds support for SMSC LAN8742 in phylib Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-28net: stm32: add designware mac glue code for stm32Michael Kurz
This patch adds glue code required for enabling the designware mac on stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-11net: gmac_rockchip: Add Rockchip GMAC driverSjoerd Simons
Add a new driver for the GMAC ethernet interface present in Rockchip RK3288 SOCs. This driver subclasses the generic design-ware driver to add the glue needed specifically for Rockchip. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Romain Perier <romain.perier@collabora.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-11net: designware: Export the operation functionsSimon Glass
Export all functions so that drivers can use them, or not, as the need arises. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Romain Perier <romain.perier@collabora.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-11net: designware: Split the link init into a separate functionSimon Glass
With rockchip we need to make adjustments after the link speed is set but before enabling received/transmit. In preparation for this, split these two pieces into separate functions. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Romain Perier <romain.perier@collabora.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-11net: designware: Adjust dw_adjust_link() to return an errorSimon Glass
This function can fail, so return the error if there is one. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Romain Perier <romain.perier@collabora.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-11net: designware: Export various functions/struct to allow subclassingSjoerd Simons
To allow other DM drivers to subclass the designware driver various functions and structures need to be exported. Export these. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Romain Perier <romain.perier@collabora.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-11xilinx_phy: Pass correct pointer to fdtdec_get_int()Kamensky Ivan
This patch fixes incorrect pointer on offset device in device tree blob. When using with the component "Ethernet 1G/2.5G BASE-X PCS/PMA or SGMII" it does not understand what type is XAE_PHY_TYPE_1000BASE_X and trying to change frequency. Signed-off-by: Kamensky Ivan <kamensky.ivan@mail.ru> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-10net: zynq_gem: Use clock driver for ZynqMPSiva Durga Prasad Paladugu
Enable and use the clock driver routine defined in clock driver toset required clock appropriately. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10net: gem: Use wait_for_bit() instead of private mdio_wait()Michal Simek
Using generic wait_for_bit() implementation instead of using private wait function. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-04powerpc: mpc85xx: Remove variant SoCs T1020/T1022/T1013/T1014York Sun
Remove these SoCs from Kconfig because they don't have individual configuration. Clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
2016-12-27Update Maintainer and Author's email addressAjay Bhargav
I am not longer using my old email address "ajay.bhargav@einfochips.com". For U-Boot development email address is now updated to contact@8051projects.net Signed-off-by: Ajay Bhargav <contact@8051projects.net>
2016-12-20net: xilinx: Use mdio_register_seq() to support multiple instancesMichal Simek
axi_emac, emaclite and gem have the same issue with registering multiple instances with mdio busses. mdio bus name has to be uniq but drivers are setting up only one name for all. Use mdio_register_seq() and pass dev->seq number to allow multiple mdio instances registration. Reported-by: Phani Kiran Kara <phanikiran.kara@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-12-18Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
Migrate CONFIG_ARCH_USE_MEMSET/MEMCPY with this merge. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-12-16dm: net: fec: Add .read_rom_hwaddrJagan Teki
Add .read_rom_hwaddr on dm eth_ops. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-16net: fec_mxc: Driver cleanupsJagan Teki
- Remove exctra space - Add space - Add tab space - Fix single line comments quotes - Fix 'CHECK: Avoid CamelCase' - Fix 'CHECK: Alignment should match open parenthesis' - Fix 'WARNING: line over 80 characters' - Re-arrage header include files Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-16net: fec_mxc: Convert into driver modelJagan Teki
This patch add driver model support for fec_mxc driver. Cc: Simon Glass <sjg@chromium.org> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit (git 2.34.1) at 2024-12-26 14:11:45 +0000