summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2018-06-02Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-06-01pinctrl: renesas: Initial R8A77990 PFC supportMarek Vasut
This patch adds initial pinctrl driver to support for the R8A77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01pinctrl: renesas: Add PORT_GP_11 helper macroTakeshi Kihara
This follows the style of existion PORT_GP_X macros and will be used by a follow-up patch for the r8a77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-29mvebu: pinctrl: Add SD/eMMC PHY selector to the driverKonstantin Porotchkin
When the pin control driver selects SD/eMMC function for a pin group, there is additional configuration to be done for this case - switch the PHY to work with SDHCI interface. This patch adds the missing functionality into the pin control driver. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Evan Wang <xswang@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29mvebu: pinctrl: sync compatible string with Linux 4.17-rc4Evan Wang
For pinctrl driver of mvebu, the compatible strings supported are defined differently from Linux version. The patch aligned the compatible string with Linux 4.17-rc4. Signed-off-by: Evan Wang <xswang@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-16pinctrl: do not set_state for device without valid ofnodeKever Yang
Not all the udevice have a available DT node, eg. rksdmmc@ff500000.blk which add by mmc_bind(), these device do not have/need set pinctrl state. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-08Merge git://git.denx.de/u-boot-uniphierTom Rini
2018-05-08pinctrl: meson: Update pinmux with new Linux bindingsNeil Armstrong
The pinctrl bindings has changed for Amlogic Meson SoCs since Linux 4.13, update the pinctrl driver to take this in account. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-05-08pinctrl: uniphier: add ethernet TX pin data for LD20Masahiro Yamada
These are necessary to optimize the drive-strength of the pins. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-08pinctrl: uniphier: support drive-strength configurationMasahiro Yamada
This allows our DT to specify drive-strength property. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-08pinctrl: uniphier: support per-pin configuration via DTMasahiro Yamada
Currently, the UniPhier pinctrl drivers expose only the pin-group interface to device tree. Provide .get_pins_count, .get_pin_name, .pinconf_set hooks to support pin configuration via 'pins' DT property. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-08pinctrl: uniphier: include <linux/build_bug.h> instead of <linux/bug.h>Masahiro Yamada
The #include <linux/bug.h> is here to use BUILD_BUG_ON_ZERO(). By replacing it with <linux/build_bug.h>, we can reduce the number of headers pulled in. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-08pinctrl: uniphier: replace printf() with dev_err()Masahiro Yamada
dev_err() is more suitable for printing error messages. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-08pinctrl: uniphier: remove unneeded pin data of LD6b SoCMasahiro Yamada
Since commit f73cfb4d0dee ("pinctrl: uniphier: simplify input enable and delete pin arrays"), these data are no longer used in any useful way. Remove. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-07regmap: clean up regmap allocationMasahiro Yamada
Putting zero length array at the end of struct is a common technique to embed arbitrary length of members. There is no good reason to let regmap_alloc_count() branch by "if (count <= 1)". As far as I understood the code, regmap->base is an alias of regmap->ranges[0].start, but it is not helpful but make the code just ugly. Rename regmap_alloc_count() to regmap_alloc() because the _count suffix seems pointless. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: fixup cpu_info-rcar.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRTom Rini
We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-01Merge git://git.denx.de/u-boot-dmTom Rini
2018-03-31pinctrl-uclass: convert to use live dtKever Yang
Use live dt interface for pinctrl_select_state_full() Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-30Merge git://git.denx.de/u-boot-marvellTom Rini
2018-03-30arm64: a37xx: pinctrl: Correct mpp definitionsKen Ma
This patch corrects below mpp definitions: - The sdio_sb group is composed of 6 pins and not 5; - The rgmii group contains pins mpp2[17:6] and not mpp2[19:6]; - Pin of group "pmic0" is mpp1[6] but not mpp1[16]; - Pin of group "pmic1" is mpp1[7] but not mpp1[17]; - A new group "smi" is added in A0 with 2 pins - mpp2[19:18], its bitmask is bit4; - Group "pcie1" has 3 pins in A0 - mpp2[5:3], its bit mask is bit5 | bit9 | bit10 but not bit4; - Group "ptp" has 3 pins in A0 as Z1, but its bitmask is changed to bit11 | bit12 | bit13. Reviewed-on: http://vgitil04.il.marvell.com:8080/43288 Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Hua Jing <jinghua@marvell.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-03-30arm64: a37xx: pinctrl: Fix gpio pin offset in registerKen Ma
For armada_37xx_update_reg(), the parameter offset should be pointer so that it can be updated, otherwise offset will keep old value, and then when offset is larger than or equal to 32 the mask calculated by "BIT(offset)" will be 0 in gpio chip hook functions, it's an error, this patch set offset parameter of armada_37xx_update_reg() as pointer. Reviewed-on: http://vgitil04.il.marvell.com:8080/43287 Reviewed-by: Hua Jing <jinghua@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-03-30arm64: a37xx: pinctrl: Fix the pin 23 on south bridgeKen Ma
Pin 23 on South bridge does not belong to the rgmii group. It belongs to a separate group which can have 3 functions. Due to this the fix also have to update the way the functions are managed. Until now each groups used NB_FUNCS(which was 2) functions. For the mpp23, 3 functions are available but it is the only group which needs it, so on the loop involving NB_FUNCS an extra test was added to handle only the functions added. The bug was visible when the gpio regulator used the gpio 23, the whole rgmii group was setup to gpio which broke the Ethernet support on the Armada 3720 DB board. Thanks to this patch, the UHS SD cards (which need the vqmmc) _and_ the Ethernet work again. Reviewed-on: http://vgitil04.il.marvell.com:8080/43284 Reviewed-by: Hua Jing <jinghua@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-03-30arm64: a37xx: pinctrl: Fix number of pin in south bridgeKen Ma
On the south bridge we have pin from 0 to 29, so it gives 30 pins (and not 29). Reviewed-on: http://vgitil04.il.marvell.com:8080/43285 Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Hua Jing <jinghua@marvell.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-03-28rockchip: pinctrl: rk3188: Move the iomux definitions into pinctrl-driverAlexander Kochetkov
Clean the iomux definitions at grf_rk3188.h, and move them into pinctrl-driver for resolving the compiling error of redefinition. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28rockchip: pinctrl: rk3036: Move the iomux definitions into pinctrl-driverAlexander Kochetkov
Clean the iomux definitions at grf_rk3036.h, and move them into pinctrl-driver for resolving the compiling error of redefinition. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28rockchip: pinctrl: rk3399: add support for I2C[123467]Philipp Tomsich
This adds support for the (to date unsupported) I2C controllers 1~4 and 6~7 (i.e. now all controllers except I2C5, which is not accessible on the RK3399-Q7, are supported by pinctrl). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-19pinctrl: stm32: update pincontrol for stmp32mp157Patrick Delaunay
- add the 2 new compatible used by STM32MP157 "st,stm32mp157-pinctrl" "st,stm32mp157-z-pinctrl" - update the mask for the port Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-05Merge git://git.denx.de/u-boot-shTom Rini
2018-03-05libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>Masahiro Yamada
Thomas reported U-Boot failed to build host tools if libfdt-devel package is installed because tools include libfdt headers from /usr/include/ instead of using internal ones. This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.h and replaces include directives: #include <libfdt.h> -> #include <linux/libfdt.h> #include <libfdt_env.h> -> #include <linux/libfdt_env.h> Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05pinctrl: Kconfig: Fix typoMarek Behún
Signed-off-by: Marek Behun <marek.behun@nic.cz>
2018-03-05pinctrl: rmobile: Add R8A77965 M3N entriesMarek Vasut
Add entries for the R8A77965 M3N SoC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-28Merge git://git.denx.de/u-boot-rockchipTom Rini
2018-01-28bcm2835_pinctrl: Probe pre-relocAlexander Graf
The serial drivers now depend on the pinctrl driver to determine whether they are enabled. That means if a serial device wants to be used pre-reloc, we also need the pinctrl device pre-reloc. Adapt the pinctrl driver as well as dts overlay accordingly. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28bcm283x: Add pinctrl driverAlexander Graf
The bcm283x family of SoCs have a GPIO controller that also acts as pinctrl controller. This patch introduces a new pinctrl driver that can actually properly mux devices into their device tree defined pin states and is now the primary owner of the gpio device. The previous GPIO driver gets moved into a subdevice of the pinctrl driver, bound to the same OF node. That way whenever a device asks for pinctrl support, it gets it automatically from the pinctrl driver and GPIO support is still available in the normal command line phase. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28rockchip: pinctrl: Add rk322x gmac pinctrl supportDavid Wu
Set gmac pins iomux and rgmii tx pins to 12ma drive-strength, clean others to 2ma. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driverDavid Wu
Clean the iomux definitions at grf_rk322x.h, and move them into pinctrl-driver for resolving the compiling error of redefinition. After that, define the uart2 iomux at rk322x-board file. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: pinctrl: Add rk3328 gmac pinctrl supportDavid Wu
Need to set gmac m1 pins iomux, gmac m0 tx pins, select bit2 and bit10 at com iomux register. After that, set rgmii m1 tx pins to 12ma drive-strength, and clean others to 2ma. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: pinctrl: rk3328: Move the iomux definitions into pinctrl-driverDavid Wu
Clean the iomux definitions at grf_rk3328.h, and move them into pinctrl-driver for resolving the compiling error of redefinition. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: pinctrl: rv1108: Move the iomux definitions into pinctrl-driverDavid Wu
If we include both the rk3288_grf.h and rv1108_grf.h, it will cause the conflicts of redefinition. Clean the iomux definitions at grf_rv1108.h, and move them into pinctrl-driver. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-24pinctrl: rmobile: Import R8A7794 E2 PFC tablesMarek Vasut
Import PFC tables for R8A7794 E2 SoC from upstream Linux kernel v4.15-rc8, commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-24pinctrl: rmobile: Import R8A7792 V2H PFC tablesMarek Vasut
Import PFC tables for R8A7792 V2H SoC from upstream Linux kernel v4.15-rc8, commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-24pinctrl: rmobile: Import R8A7791/R8A7793 M2 PFC tablesMarek Vasut
Import PFC tables for R8A7791 M2W and R8A7793 M2N SoC from upstream Linux kernel v4.15-rc8, commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-24pinctrl: rmobile: Import R8A7790 H2 PFC tablesMarek Vasut
Import PFC tables for R8A7790 H2 SoC from upstream Linux kernel v4.15-rc8, commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-10Merge git://git.denx.de/u-boot-marvellTom Rini
2018-01-10pinctrl: stm32: add stm32f4 pinctrl compatible stringsPatrice Chotard
STM32F4 SoCs uses the same pinctrl block as found into STM32F7 and H7 SoCs. We can add "st,stm32f429-pinctrl" and "st,stm32f469-pinctrl" compatible string into pinctrl_stm32.c. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-09pinctrl: mvebu: Make drivers depend on the pinctrl frameworkMiquel Raynal
Armada pinctrl drivers shall not be compiled without the entire pinctrl framework and thus lack a "depends on" condition, otherwise the driver will simply not be probed. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-12-09pinctrl: rmobile: Add R8A77995 D3 PFC tablesMarek Vasut
Add PFC tables for R8A77995 D3 SoC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09pinctrl: rmobile: Add R8A77970 V3M PFC tablesMarek Vasut
Add PFC tables for R8A77970 V3M SoC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-30rockchip: rk3128: add pinctrl driverKever Yang
Add rk3128 pinctrl driver and grf/iomux structure definition. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
generated by cgit (git 2.34.1) at 2024-12-26 07:33:27 +0000