summaryrefslogtreecommitdiff
path: root/drivers/serial/serial_sh.c
AgeCommit message (Collapse)Author
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-13serial: sh: Add SCIFA0 address entryMarek Vasut
Add the SCIFA0 address entry so it can be used in TPL if needed due to size restrictions. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-02-16serial: Replace CONFIG_ with CONFIG_IS_ENABLEDMarek Vasut
Cosmetic change, replace CONFIG_* with CONFIG_IS_ENABLED(*) . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-24serial: sh: Replace fdtdec_get_addr() with devfdt_get_addr()Marek Vasut
Replace fdtdec_get_addr() with devfdt_get_addr() as the later one is the current recommended practice. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-24serial: sh: Enable clock if availableMarek Vasut
If the clock framework provides the driver with valid clock, enable them, otherwise the SCIF might not work if the clock are not enabled prior to the driver probe. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-03serial: sh: Use the clock framework to obtain clock configMarek Vasut
Since we now have clock driver on the RCar Gen3 , obtain the clock configuration using the clock framework functions. In case this fails, fall back to the original code for pulling the clock config directly out of OF. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-02-08dm: core: Replace of_offset with accessorSimon Glass
At present devices use a simple integer offset to record the device tree node associated with the device. In preparation for supporting a live device tree, which uses a node pointer instead, refactor existing code to access this field through an inline function. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-09serial_sh: Add standrad SCI (w/o FIFO) supportYoshinori Sato
Add support for standard type SCI (without FIFO) port. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-07-09serial_sh: Device Tree supportYoshinori Sato
Add Device Tree bindings. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-02-25serial: sh: Remove invalid UTF-8 characterNobuhiro Iwamatsu
serial_sh.c contains invalid UTF-8 character. This deletes the character. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-02-12dm: sh: serial: Add support driver modelNobuhiro Iwamatsu
This adds driver model support with this driver. This was tested by Koelsch board and Gose board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-25serial: make local functions staticJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-08-09serial: sh: Add support External Clock modeNobuhiro Iwamatsu
R8A7780 and R7A7791 of rmobile supports External Clock mode, and these uses different from Internal Clock mode registers and calculations to the baud rate setting. This adds function for External Clock mode. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2013-10-17serial: sh: Add support R8A7790Nobuhiro Iwamatsu
This adds the preset value to register, and setup of baudrate. Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2013-10-17serial: sh: Change definition of clock of SCIFNobuhiro Iwamatsu
The former SH/SCIF driver had calculated baudrate based on CONFIG_SYS_CLK_FREQ. The newest SH/SCIF needs calculation of the clock for SCIF. This patch defines clock CONFIG_SH_SCIF_CLK_FREQ for SCIF and changes it to CONFIG_SH_SCIF_CLK_FREQ from CONFIG_SYS_CLK_FREQ. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Albert Aribaud <albert.u.boot@aribaud.net>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2012-11-30serial: serial_sh: bugfix: autoboot fails if serial console is not connectedTetsuyuki Kobayashi
On kzm9g board (rmobile SoC), autoboot fails if serial console cable is not connected. When serial cable is not connected, serial error occurs and some garbage comes in data register. sh_serial_tstc() in serial_sh.c does not check error status and misunderstand there is some input data. It is the reason that autoboot fails. This patch adds checking error status in sh_serial_tstc(). This patch is based on v2013.01-rc1 tag of u-boot master git. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-10-17serial: Use default_serial_puts() in driversMarek Vasut
Replace the in-place ad-hoc implementation of serial_puts() within the drivers with default_serial_puts() call. This cuts down on the code duplication quite a bit. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
2012-10-15serial: Remove CONFIG_SERIAL_MULTI from serial driversMarek Vasut
Remove the support for not-CONFIG_SERIAL_MULTI part from serial port drivers and some board files. Since CONFIG_SERIAL_MULTI is now enabled by default, that part is a dead code. Remove it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15serial: sh: Implement CONFIG_SERIAL_MULTI into sh serial driverMarek Vasut
Implement support for CONFIG_SERIAL_MULTI into sh serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the sh driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Phil Edworthy <PHIL.EDWORTHY@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Tom Rini <trini@ti.com>
2012-05-28sh: Add SH7269 device and RSK2+SH7269 boardPhil Edworthy
This is an sh2a device (max 266MHz) with FPU, video display controller (VDC), 8 serial ports, 4 I2C channels, 3 CAN ports, SD and on-chip USB. The RSK2+SH7269 board uses the SH7269 processor. It is often referred to as just rsk7269. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-01-11sh: serial: Update serial driver for SHNobuhiro Iwamatsu
I copied the setting of CPU from Linux kernel and commonized it. By this, we can communalize a kernel and information. And added the serial setting of many CPU's. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2010-12-21Move DECLARE_GLOBAL_DATA_PTR to file scopeJohn Rigby
It can be optimised out by the compiler otherwise resulting in obscure errors like a board not booting. This has been documented in README since 2006 when these were first fixed up for GCC 4.x. Signed-off-by: John Rigby <john.rigby@linaro.org> Fix some additional places. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-By: Albert ARIBAUD <albert.aribaud@free.fr>
2009-01-16sh: serial: use readx/writex accessorsJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2009-01-16sh: serial: coding style cleanupJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-12-10sh: Update SuperH serial driverNobuhiro Iwamatsu
The address of SCFSR register is wrong at SH7720/SH7721. This patch fix this. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-09-19sh: Fix typo in SH serial driverNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-08-31sh: add support Renesas SH7723Nobuhiro Iwamatsu
Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other. This patch supports CPU register's header file and SCIF serial driver. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-08-31sh: Add support Renesas SH7203 processorNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-08-13serial: move CFG_SCIF_CONSOLE to CONFIG_SCIF_CONSOLEJean-Christophe PLAGNIOL-VILLARD
move also conditional compilation to Makefile Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-06-09sh: SH7763 SCIF supportNobuhiro Iwamatsu
SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution, but only SCIF2 is different. This patch work all SCIF channel. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-05-21Big white-space cleanup.Wolfgang Denk
This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-03-28sh: Removed warning when compiling drivers/serial/serial_sh.c.Mark Jonas
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-28sh: Add support SuperH SH7751/SH7751RNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-28sh: Fix receive FIFO level register of SH4ANobuhiro Iwamatsu
Receive FIFO level register is different in SH4A. Because register is different, cannot occasionally receive data. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-28sh: Add support SH7780Yusuke Goda
SH7780 is CPU of Renesas Technology. This CPU has - CPU clock 400MHz - PCI support - DDR-SDRAM controller - etc ... Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-01-17sh: Update SuperH SCIF driverNobuhiro Iwamatsu
This patch fixed wrong SH7720 CPU macro and changed macro that calculated value of SCBRR register. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-01-15sh: Add support SH7710/SH7712Nobuhiro Iwamatsu
SH7710/SH7712 of SH3 CPU are supported. SH771X is called SH-Ether, and has the Ether controller in CPU. The driver of Ether is not included in this patch. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-01-15sh: Add support for SH7720 in serial_sh driver.Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2007-12-27Fix coding style issues; update CHANGELOG.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-12-07sh: Moved driver of the SuperH dependenceNobuhiro Iwamatsu
The composition of the directory in the drivers/ changed. I moved SuperH serial driver and marubun PCMCIA driver. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
generated by cgit (git 2.34.1) at 2024-12-29 18:31:45 +0000