summaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)Author
2019-07-12serial: stm32: Fix warnings when compiling with W=1Patrick Delaunay
This patch solves the following warnings: drivers/serial/serial_stm32.c: In function 'stm32_serial_probe': warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if (plat->clock_rate < 0) { ^ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-06-11serial: mxc: Add iMX6SX compatible stringMarek Vasut
Add compatible string for iMX6SX. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
2019-05-24Merge tag 'u-boot-stm32-20190523' of https://github.com/pchotard/u-bootTom Rini
- Add various STM32MP1 fixes for serial, env, clk, board, i2c ... - Add STM32MP1 DDR driver update: These update introduce the DDR interactive mode described in: https://wiki.st.com/stm32mpu/index.php/U-Boot_SPL:_DDR_interactive_mode This mode is used by the CubeMX: DDR tuning tool. https://wiki.st.com/stm32mpu/index.php/STM32CubeMX The DDR interactive mode is NOT activated by default because it increase the SPL size and slow down the boot time (200ms wait added).
2019-05-24drivers: serial: mcfuart: add DT supportAngelo Dureghello
This patch adds devicetree support to the mcfuart.c driver and removes non DM code. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2019-05-23serial: stm32: remove watchog reset in debug putcPatrick Delaunay
For STM32MP, the watchdog is based on DM and the function watchod_reset call the function uclass_get_device(UCLASS_WDT) to found the driver associated IWDG2. As this reset is not mandatory in debug putc (the uart fifo will be empty after some us), we can simplify the code by removing this call. And this patch avoid issue when putc is called before initialization of DM core, before the parsing of the device tree parsing and each node bound to driver; that also avoid memory leak. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23serial: stm32: remove unnecessary tracePatrick Delaunay
Remove the trace indicating the end of the DEBUG initialization Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-13Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- A10 FPGA programming support, Gen5 livetree conversion
2019-05-10serial: altera_uart: convert to livetreeSimon Goldschmidt
Convert 'altera_uart_ofdata_to_platdata' to use 'dev_read_u32_default' instead of 'fdtdec_get_int' and get rid of DECLARE_GLOBAL_DATA_PTR. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-10sh: sh3: Remove CPU supportMarek Vasut
This CPU core is old, no boards using the CPU are left in mainline, it has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10sh: sh2: Remove CPU supportMarek Vasut
This CPU core is old, no boards using the CPU are left in mainline, it has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10serial: sh: Drop assorted SH3, SH4, SH5 macrosMarek Vasut
Drop unused macros from the header to clean it up. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10serial: sh: Drop RTS7751R2D supportMarek Vasut
There is no RTS7751R2D support in U-Boot, drop all the RTS7751R2D macros. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10serial: sh: Drop SH2007 supportMarek Vasut
There is no SH2007 support in U-Boot, drop all the SH2007 macros. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10serial: sh: Drop H8 supportMarek Vasut
There is no H8 support in U-Boot, drop all the H8 macros. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-08Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
- H6 Beelink GS1 board (Clément) - Olimex A64-Teres-I board (Jonas) - sunxi build fix for CONFIG_CMD_PXE|DHCP (Ondrej) - Change include order (Jagan) - EPHY clock changes (Jagan) - EMAC enablement on Cubietruck Plus, BPI-M3 (Chen-Yu Tsai)
2019-05-09serial: sifive: Change include orderJagan Teki
Like clk_get_by_index, there is requirement for clk_get_by_index_nodev. In this case to make common code functionalities for dev and nodev, clk_get_by_index is trying to get the index of clock by passing ofnode instead of actual dev like current gpio uclass does. In these scenarios with current order of include files the serial_sifive driver is unable to find CONFIG_ENV_SIZE. In file included from arch/riscv/include/asm/u-boot.h:23:0, from include/dm/of.h:10, from include/dm/ofnode.h:12, from include/clk.h:11, from drivers/serial/serial_sifive.c:6: include/environment.h:145:19: error: 'CONFIG_ENV_SIZE' undeclared here (not in a function); did you mean 'CONFIG_CMD_XIMG'? #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE) So, fix consists of changing the order of include files in serial_sifive.c to include first common.h file. Cc: Anup Patel <Anup.Patel@wdc.com> Cc: Rick Chen <rick@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-07serial: sh: Add RZ/A1 supportMarek Vasut
Add support for RZ/A1 SoC specifics. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07sh: 7785: Remove CPU supportMarek Vasut
There are no more boards using this CPU and there is no prospect of any boards showing up soon, remove it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-07sh: 7724: Remove CPU supportMarek Vasut
There are no more boards using this CPU and there is no prospect of any boards showing up soon, remove it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-01rockchip: use 'arch-rockchip' as header file pathKever Yang
Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common header file path, so that we can get the correct path directly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-04-09serial: atmel_usart: Use fixed clock value in SPL version with DM_SERIALStefan Roese
This patch adds an alterative SPL version of atmel_serial_enable_clk(). This enables the usage of this driver without full clock support (in drivers and DT nodes). This saves some space in the SPL image. Please note that this fixed clock support is only added to the SPL code in the DM_SERIAL part of this file. All boards not using SPL & DM_SERIAL should not be affected. This patch also introduces CONFIG_SPL_UART_CLOCK for the fixed UART input clock. It defaults to 132096000 for ARCH_AT91 but can be set to a different value if needed. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas@biessmann.org> Cc: Eugen Hristev <eugen.hristev@microchip.com>
2019-03-13imx: serial_mxc: use CONFIG_IS_ENABLED instead of ifdefAdam Ford
Kconfig allows boards to configured with DM_SERIAL and still have SPL_DM_SERIAL disabled. This patch changes the ifdef's to CONFIG_IS_ENABLED to allow the modes to differ between SPL and U-Boot. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-27drivers: serial_sifive: Skip baudrate config if no input clockAtish Patra
It is possible that input clock is not available because clk device was not available and 'clock-frequency' DT property is also not available. In this case, instead of failing we should just skip baudrate config by returning zero. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2019-02-27drivers: serial_sifive: Fix baud rate calculationAtish Patra
Compute the baud rate multipler with more precision. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-02-15imx: serial_mxc: disable ri and dcd irq in dte modeMax Krummenacher
If the UART is used in DTE mode the RI and DCD bits in UCR3 become irq enable bits. Both are set to enabled after reset and both likely are pending. Disable the bits to prevent an interrupt storm when Linux enables the UART interrupts. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-02-09drivers: serial: dm: Enable DM_FLAG_PRE_RELOC in SBSA pl011 uart driverVabhav Sharma
The DM_FLAG_PRE_RELOC shall be enabled in SBSA PL011 uart driver as this driver is used in NXP based SoCs It is necessary to have Serial console running before relocation The !CONFIG_IS_ENABLED(OF_CONTROL) [*] check is set as "workaround" for DM problem : 4687919684e This flag is set if board does not support device-tree and using platform data, In DM Model either of device tree or platform data can be used to fetch device configuration It is possible to use SBSA UART with CONFIG_DM_SERIAL but witout corresponding device tree description (OF_CONTROL) Other board/SoCs have this flag set unconditionally Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
2019-01-25serial_arc: Allocate buffer for private dataAlexey Brodkin
Apparently we never allocated buffer for arc_serial_platdata which for some reason never caused problems when executed in nSIM. But in Qemu this causes expected problems. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-01-15Merge tag 'dm-pull-15jan19' of git://git.denx.de/u-boot-dmTom Rini
Fix recent changes to serial API for driver model Buildman clang support and a few fixes Small fixes to 'dm tree' and regmap test Improve sandbox build compatibility A few other minor fixes
2019-01-15serial: ns16550: fix debug uart putc called before initSimon Goldschmidt
If _debug_uart_putc() is called before _debug_uart_init(), the ns16550 debug uart driver hangs in a tight loop waiting for the tx FIFO to get empty. As this can happen via a printf sneaking in before the port calls debug_uart_init(), introduce a config option to ignore characters before the debug uart is initialized. This is done by reading the baudrate divisor and aborting if is zero. The Kconfig option is required as reading the baudrate divisor does not seem to work for all ns16500 compatibles (which is why the last attempt on this has been reverted in 1a67969a99). Tested on socfpga_cyclone5_socrates. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-15drivers: serial: DEBUG_UART_SKIP_INIT depends on DEBUG_UARTSimon Goldschmidt
DEBUG_UART_SKIP_INIT is used only by debug UART and thus should depend on DEBUG_UART. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-14dm: serial: Adjust serial_getinfo() to use proper APISimon Glass
All driver-model functions should have a device as the first parameter. Update this function accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-01-14dm: serial: Adjust serial_setconfig() to use proper APISimon Glass
All driver-model functions should have a device as the first parameter. Update this function accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-01-14dm: serial: Adjust serial_getconfig() to use proper APISimon Glass
All driver-model functions should have a device as the first parameter. Update this function accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-12-18drivers: serial: Add SiFive UART driverAnup Patel
This patch adds SiFive UART driver. The driver is 100% DM driver and it determines input clock using clk framework. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2018-12-15serial: serial_stm32: Add reset supportPatrice Chotard
In some cases, UART is configured by early boot stage. To be sure of the initial state of UART and to avoid spurious chars on console, reset the serial block before configuring it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-12spl: fix build failure with !CONFIG_SPL_PCI_SUPPORTSekhar Nori
Building U-Boot with CONFIG_PCI and CONFIG_DM_PCI enabled, but CONFIG_SPL_PCI_SUPPORT disabled, results in following linker error: lib/built-in.o: In function `fdtdec_get_pci_bar32': lib/fdtdec.c:305: undefined reference to `dm_pci_read_bar32' fdtdec.c:305:(.text.fdtdec_get_pci_bar32+0x24): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `dm_pci_read_bar32' This is because reference to dm_pci_read_bar32() remains in lib/fdtdec.c while SPL build does not descend into drivers/pci directory in drivers/Makefile if CONFIG_SPL_PCI_SUPPORT is not enabled. Fix this by applying appropriate #define guards in lib/fdtdec.c. It looks like ns16550.c has the same problem, so fixed that too. To simplify this, CONFIG_SPL_PCI_SUPPORT is renamed to CONFIG_SPL_PCI (enables use of CONFIG_IS_ENABLED() macro). Suggested-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07serial: omap: Add code for early debuggingFelix Brack
This patch adds code missing when CONFIG_DEBUG_UART_OMAP is enabled as early debugging UART. The code is basically copied from the ns16550 driver. Signed-off-by: Felix Brack <fb@ltec.ch>
2018-12-07serial: bcm6858: remove driver and switch to bcm6345Álvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-07serial: bcm6345: switch to raw I/O functionsÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-05serial: ns16550: Provide ->getinfo() implementationAndy Shevchenko
New callback will supply necessary information, for example, to ACPI SPCR table. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-05serial: ns16550: Read reg-io-width from device treeAndy Shevchenko
Cache the value of the reg-io-width property for the future use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-05dm: serial: Introduce ->getinfo() callbackAndy Shevchenko
New callback will give a necessary information to fill up ACPI SPCR table, for example. Maybe used later for other purposes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Change ADR_SPACE_SYSTEM_IO to SERIAL_ADDRESS_SPACE_IO to fix build error: Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-05dm: serial: Add ->getconfig() callbackAndy Shevchenko
In some cases it would be good to know the settings, such as parity, of current serial console. One example might be an ACPI SPCR table to generate using these parameters. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03Revert "serial: ns16550: fix debug uart putc called before init"Simon Goldschmidt
This reverts commit 6f57c34473d37b8da5e6a3764d0d377d748aeef1 since it does not seem to work at least on rk3399. The Rockchip Technical Reference Manual (TRM) for the rk3399 says the baud rate prescaler register is readable only when USR[0] is zero. Since this bit is defined as "reserved" in the socfpga cylcone5 TRM, let's rather drop this than making the ns16550 debug uart more platform specific. Reported-by: Roosen Henri <Henri.Roosen@ginzinger.com> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com
2018-12-03drivers: serial: get rid of non DM mpc8xx driverChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-12-03drivers: serial: migrate mpc8xx to DMChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-11-28serial: MediaTek: add high-speed uart driver for MediaTek SoCsRyder Lee
Many SoCs from MediaTek have a high-speed uart. This UART is compatible with the ns16550 in legacy mode. It has extra registers for high-speed mode which can reach a maximum baudrate at 921600. However this UART will no longer be compatible if it's in high-speed mode. Some BootROM of MediaTek's SoCs will change the UART into high-speed mode and the U-Boot must use this driver to initialize the UART. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Tested-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-16serial: ns16550: add setconfig supportSimon Goldschmidt
Add possibility to update the serial parity used. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2018-11-16serial: bcm6858: add serial supportPhilippe Reynes
This driver add the support of serial on bcm6858. It's based on serial for bcm6345. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2018-11-14serial: Remove DM_FLAG_PRE_RELOC flag in various driversBin Meng
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be bound before relocation. However due to a bug in the DM core, the flag only takes effect when devices are statically declared via U_BOOT_DEVICE(). This bug has been fixed recently by commit "dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()", but with the fix, it has a side effect that all existing drivers that declared DM_FLAG_PRE_RELOC flag will be bound before relocation now. This may expose potential boot failure on some boards due to insufficient memory during the pre-relocation stage. To mitigate this potential impact, the following changes are implemented: - Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver only supports configuration from device tree (OF_CONTROL) - Keep DM_FLAG_PRE_RELOC flag in the driver only if the device is statically declared via U_BOOT_DEVICE() - Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for drivers that support both statically declared devices and configuration from device tree Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-28 17:02:41 +0000