summaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)Author
2020-01-17common: Drop floppy disk supportSimon Glass
This seems pretty old now. It has not been converted to driver model and is not used by any boards. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-15Add dependencies for MALLOC_F and OF_LIBFDTSean Anderson
Some features implicitly depended on MALLOC_F and OF_LIBFDT and would fail at link-time if these features were not enabled. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-01-14serial_lpuart: add support for i.MXRTGiulio Benetti
Add i.MXRT compatible string and cpu type support to lpuart driver, to use little endian 32 bits configurations. Also according to RM, the Receive RX FIFO Enable (RXFE) field in LPUART FIFO register is bit 3, so this definition should change to 0x08 as done for i.MX8. It needs also to set baudrate the same way as i.MX8 does. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14serial_lpuart: add clock enable if CONFIG_CLK is definedGiulio Benetti
This driver assumes that lpuart clock is already enabled before probing but using DM only lpuart won't be automatically enabled so add clk_enable() when probing if CONFIG_CLK is defined. If clock is not found, because DM is not used, let's emit a warning and proceed, because serial clock could also be already enabled by non DM code. If clock is found but cna't be enabled then return with error. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2019-12-10serial: sandbox: support UnicodeHeinrich Schuchardt
Due to a conversion error the sandbox does not accept byte values 0x80-0xff from the keyboard. The UEFI extended text input unit test requires Unicode support. Use unsigned char for the serial buffer. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-12-03Merge tag 'dm-pull-3dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dmTom Rini
Fix stdout-path handling
2019-12-03Kconfig: make TPL_DM_SERIAL depend on TPL_DMThomas Hebb
This missing dependency seems like an oversight, since all other TPL_DM_* options have it. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-12-02serial: usb: Correct the usbtty_...() prototypesSimon Glass
The function declarations in serial.h are not in sync with what is currently used in usbtty. Fix this by updating the header and including it, to help catch future such problems. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02dm: serial: Handle "stdout-path" with ":options" correctlyBin Meng
With commit f0921f5098d8 ("fdt: Sync up to the latest libfdt"), SiFive Unleashed board does not boot any more. This was due to the U-Boot local changes commit 77d7fff8cec2 ("fdt: Fix handling of paths with options in them") to libfdt/fdt_ro.c was dropped during the libfdt upgrade. >From the history [1] it was mentioned that the U-Boot changes commit 77d7fff8cec2 ("fdt: Fix handling of paths with options in them") was rejected by libfdt upstream, hence we need find another way to fix the things. This commit uses another method, by updating serial_check_stdout() directly to handle the situation of "stdout-path" with ":options". A simpler way is to change the logic in fdtdec_get_chosen_node() to do similar thing, but I feel that not every property in chosen node may have the option in them, hence it would make more sense to do the special handling in serial_check_stdout() directly. [1]: http://patchwork.ozlabs.org/patch/462756/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-11-24drivers: bcm283x: Set pre-location flag for OF_BOARDMatthias Brugger
U-Boot support on Raspberry Pi 4 relies on the device-tree provided by the firmware. The blob does not contain the U-Boot specific pre-loc-rel properties. The result is, that the U-Boot banner is not printed. We fix this by setting the DM_FLAG_PRE_RELOC flag in the driver, if we rely on a device-tree provided by the firmware. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-10-25serial: serial_mtk: add non-DM version for SPLWeijie Gao
This patch adds non-DM version for mtk hsuart driver and makes it compatible with ns16550a driver in configuration. This is needed in SPL with CONFIG_SPL_DM disabled for reducing size. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25serial: serial_mtk: enable FIFO and disable flow controlWeijie Gao
This patch adds codes to enable FIFO and disable flow control taken from ns16550 driver. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-09Merge tag 'u-boot-imx-20191009' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191009 ------------------- Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/595148532 - MX6UL / ULZ - Toradex board - Allow to set OCRAM for MX6Q/D - MX7ULP - MX8: (container image, imx8mq_mek), SCU API - fix several board booting from SD/EMMC (cubox-i for example) - pico boards [trini: display5 merged manually] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-08serial: Kconfig: make MXC_UART usable for MX7 and IMX8MPeng Fan
i.MX7 and i.MX8M use mxc uart driver, so let's make the SoC could use MXC_UART kconfig. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com>
2019-10-08dm: pci: Add a function to read a PCI BARSimon Glass
At present PCI address transaction is not supported so drivers must manually read the correct BAR after reading the device tree info. The ns16550 has a suitable implementation, so move this code into the core DM support. Note that there is no live-tree equivalent at present. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: correct the unclear comments in test.dts] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08dm: core: Call ofdata_to_platdata() with of-platdataSimon Glass
At present this function is never called when of-platdata is enabled since we never have a device tree. However, this function is responsible for copying over the of-platdata, so we must call it. Otherwise the probe() method would have to be used. Correct this and fix the sandbox serial driver to not read from the device tree and try to write to what is read-only platdata on some platforms. Fixes: 396e343b3d (dm: core: Allow binding a device from a live tree) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08serial: ns16550: Allow serial to enabled/disabled in SPLSimon Glass
At present this driver uses the wrong condition for including the code and drivers in SPL/TPL. Update it so that the code is only included if DM_SERIAL is enabled for SPL/TPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-27serial: stm32: add Framing error supportPatrick Delaunay
Add management of Bit 1 of USART_ISR = FE: Framing error This bit is set by hardware when a de-synchronization, excessive noise or a break character is detected. It is cleared by software, writing 1 to the FECF bit in the USART_ICR register (for stm32 after f4). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-26Kconfig: Varios: Fix more SPL, TPL dependenciesAdam Ford
Several options are presenting themselves on a various boards where the options are clearly not used. (ie, SPL/TPL options when SPL or TPL are not defined) This patch is not attempting to be a complete list of items, but more like low hanging fruit. In some instances, I wasn't sure of DM was required, so I simply made them SPL or TPL. This patch attempts to reduce some of the menuconfig noise by defining dependencies so they don't appear when not used. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-15riscv : serial: use rx watermark to indicate rx data is presentSagar Shrikant Kadam
In y-modem transfer mode, tstc/getc fail to check if there is any data available / received in RX FIFO, and so y-modem transfer never succeeds. Using receive watermark bit within ip register fixes the issue. This patch is based on commit c7392b7bc4e1 ("Use the RX watermark interrupt pending bit for TSTC") available at[1] [1] https://github.com/sifive/HiFive_U-Boot/tree/regression Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com> Tested-by: Padmarao Begari <padmarao.begari@microchip.com>
2019-08-11env: Rename environment.h to env_internal.hSimon Glass
This file contains lots of internal details about the environment. Most code can include env.h instead, calling the functions there as needed. Rename this file and add a comment at the top to indicate its internal nature. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Fixup apalis-tk1.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-11env: Move env_get() to env.hSimon Glass
Move env_get() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11serial_lpuart: Fix config check issue when using clk driver in SPLYe Li
Should use CONFIG_IS_ENABLED not IS_ENABLED for CLK driver, so it will check the CONFIG_SPL_CLK when building SPL Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-19serial: mxc: Add compatibles to NXP's serial driver (for imx21 and imx53)Lukasz Majewski
This patch fixes not enabled uart2 (and hence serial console) on i.MX53 devices. After following commit 1d255904c306 ("ARM: dts: imx: imx53: Synchronize iMX53 DT with Linux") from the uart2 compatible the 'fsl,imx7d-uart' has been removed (which was correct). However, the root cause of the problem was the commit 98d62e618bb9 ("arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC") which introduced this compatible. Moreover, without this patch all i.MX53 UARTs are not usable as neither 'fsl,imx53-uart' nor 'fsl,imx21-uart' are in compatible IDs in drivers/serial/serial_mxc.c file. The fix is to add 'fsl,imx53-uart' and 'fsl,imx21-uart' as compatibles for the aforementioned serial driver (those are also defined in the Linux kernel). Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2019-07-19IMX: serial: dm: Set DM_FLAG_PRE_RELOC in the IMX uart driverLukasz Majewski
The DM_FLAG_PRE_RELOC shall be set unconditionally as this driver is going to be re-used in both early SPL and U-Boot proper's pre-reloc. For i.MX based devices it is crucial to have available the serial console before relocation (otherwise the board may hand). The device definition may be provided either via device tree description or with U_BOOT_DEVICE(mxc_serial) definition. In the latter case the device will not bind in U-Boot proper when DM_FLAG_PRE_RELOC is not set. The !CONFIG_IS_ENABLED(OF_CONTROL) #if check was set as a "workaround" for DM problem described in following commit 4687919684e0 ("serial: Remove DM_FLAG_PRE_RELOC flag in various drivers"). Let's look on this check more thoroughly - we add this flag if the board doesn't support OF_CONTROL. This is a bit strange as the serial_mxc.c can be used with CONFIG_DM_SERIAL but without corresponding device tree description (OF_CONTROL). In such case the aforementioned U_BOOT_DEVICE(mxc_serial) definition is used. Other boards/SoCs have this flag set unconditionally for serial driver. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-07-14Merge tag 'u-boot-stm32-20190712' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - syscon: add support for power off - stm32mp1: add op-tee config - stm32mp1: add specific commands: stboard and stm32key - add stm32 mailbox driver - solve many stm32 warnings when building with W=1 - update stm32 gpio driver
2019-07-12serial: stm32: Fix warnings when compiling with W=1Patrick Delaunay
This patch solves the following warnings: drivers/serial/serial_stm32.c: In function 'stm32_serial_probe': warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if (plat->clock_rate < 0) { ^ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-10drivers: serial: lpuart: Enable Little Endian SupportVabhav Sharma
By default LPUART driver with compatible string "fsl,ls1021a-lpuart" support big-endian mode.On NXP SoC like LS1028A LPUART IP is little-endian,Added support to Fetch LPUART IP Endianness from lpuart device-tree node. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-06-11serial: mxc: Add iMX6SX compatible stringMarek Vasut
Add compatible string for iMX6SX. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
2019-05-24Merge tag 'u-boot-stm32-20190523' of https://github.com/pchotard/u-bootTom Rini
- Add various STM32MP1 fixes for serial, env, clk, board, i2c ... - Add STM32MP1 DDR driver update: These update introduce the DDR interactive mode described in: https://wiki.st.com/stm32mpu/index.php/U-Boot_SPL:_DDR_interactive_mode This mode is used by the CubeMX: DDR tuning tool. https://wiki.st.com/stm32mpu/index.php/STM32CubeMX The DDR interactive mode is NOT activated by default because it increase the SPL size and slow down the boot time (200ms wait added).
2019-05-24drivers: serial: mcfuart: add DT supportAngelo Dureghello
This patch adds devicetree support to the mcfuart.c driver and removes non DM code. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2019-05-23serial: stm32: remove watchog reset in debug putcPatrick Delaunay
For STM32MP, the watchdog is based on DM and the function watchod_reset call the function uclass_get_device(UCLASS_WDT) to found the driver associated IWDG2. As this reset is not mandatory in debug putc (the uart fifo will be empty after some us), we can simplify the code by removing this call. And this patch avoid issue when putc is called before initialization of DM core, before the parsing of the device tree parsing and each node bound to driver; that also avoid memory leak. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23serial: stm32: remove unnecessary tracePatrick Delaunay
Remove the trace indicating the end of the DEBUG initialization Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-13Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- A10 FPGA programming support, Gen5 livetree conversion
2019-05-10serial: altera_uart: convert to livetreeSimon Goldschmidt
Convert 'altera_uart_ofdata_to_platdata' to use 'dev_read_u32_default' instead of 'fdtdec_get_int' and get rid of DECLARE_GLOBAL_DATA_PTR. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-10sh: sh3: Remove CPU supportMarek Vasut
This CPU core is old, no boards using the CPU are left in mainline, it has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10sh: sh2: Remove CPU supportMarek Vasut
This CPU core is old, no boards using the CPU are left in mainline, it has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10serial: sh: Drop assorted SH3, SH4, SH5 macrosMarek Vasut
Drop unused macros from the header to clean it up. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10serial: sh: Drop RTS7751R2D supportMarek Vasut
There is no RTS7751R2D support in U-Boot, drop all the RTS7751R2D macros. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10serial: sh: Drop SH2007 supportMarek Vasut
There is no SH2007 support in U-Boot, drop all the SH2007 macros. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10serial: sh: Drop H8 supportMarek Vasut
There is no H8 support in U-Boot, drop all the H8 macros. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-08Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
- H6 Beelink GS1 board (Clément) - Olimex A64-Teres-I board (Jonas) - sunxi build fix for CONFIG_CMD_PXE|DHCP (Ondrej) - Change include order (Jagan) - EPHY clock changes (Jagan) - EMAC enablement on Cubietruck Plus, BPI-M3 (Chen-Yu Tsai)
2019-05-09serial: sifive: Change include orderJagan Teki
Like clk_get_by_index, there is requirement for clk_get_by_index_nodev. In this case to make common code functionalities for dev and nodev, clk_get_by_index is trying to get the index of clock by passing ofnode instead of actual dev like current gpio uclass does. In these scenarios with current order of include files the serial_sifive driver is unable to find CONFIG_ENV_SIZE. In file included from arch/riscv/include/asm/u-boot.h:23:0, from include/dm/of.h:10, from include/dm/ofnode.h:12, from include/clk.h:11, from drivers/serial/serial_sifive.c:6: include/environment.h:145:19: error: 'CONFIG_ENV_SIZE' undeclared here (not in a function); did you mean 'CONFIG_CMD_XIMG'? #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE) So, fix consists of changing the order of include files in serial_sifive.c to include first common.h file. Cc: Anup Patel <Anup.Patel@wdc.com> Cc: Rick Chen <rick@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-07serial: sh: Add RZ/A1 supportMarek Vasut
Add support for RZ/A1 SoC specifics. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07sh: 7785: Remove CPU supportMarek Vasut
There are no more boards using this CPU and there is no prospect of any boards showing up soon, remove it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-07sh: 7724: Remove CPU supportMarek Vasut
There are no more boards using this CPU and there is no prospect of any boards showing up soon, remove it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-01rockchip: use 'arch-rockchip' as header file pathKever Yang
Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common header file path, so that we can get the correct path directly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-04-09serial: atmel_usart: Use fixed clock value in SPL version with DM_SERIALStefan Roese
This patch adds an alterative SPL version of atmel_serial_enable_clk(). This enables the usage of this driver without full clock support (in drivers and DT nodes). This saves some space in the SPL image. Please note that this fixed clock support is only added to the SPL code in the DM_SERIAL part of this file. All boards not using SPL & DM_SERIAL should not be affected. This patch also introduces CONFIG_SPL_UART_CLOCK for the fixed UART input clock. It defaults to 132096000 for ARCH_AT91 but can be set to a different value if needed. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas@biessmann.org> Cc: Eugen Hristev <eugen.hristev@microchip.com>
2019-03-13imx: serial_mxc: use CONFIG_IS_ENABLED instead of ifdefAdam Ford
Kconfig allows boards to configured with DM_SERIAL and still have SPL_DM_SERIAL disabled. This patch changes the ifdef's to CONFIG_IS_ENABLED to allow the modes to differ between SPL and U-Boot. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-27drivers: serial_sifive: Skip baudrate config if no input clockAtish Patra
It is possible that input clock is not available because clk device was not available and 'clock-frequency' DT property is also not available. In this case, instead of failing we should just skip baudrate config by returning zero. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de>