summaryrefslogtreecommitdiff
path: root/drivers/spi/davinci_spi.c
AgeCommit message (Collapse)Author
2016-07-09spi: davinci_spi: Convert to driver to adapt to DMVignesh R
Convert davinci_spi driver so that it complies with SPI DM framework. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-09-11bitops: introduce BIT() definitionHeiko Schocher
introduce BIT() definition, used in at91_udc gadget driver. Signed-off-by: Heiko Schocher <hs@denx.de> [remove all other occurrences of BIT(x) definition] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
2015-07-01spi: davinci_spi: Driver cleanupJagan Teki
Arrange driver code in more readable format[1] for easy accessing and readable. [1] http://patchwork.ozlabs.org/patch/265683/ Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Rex Chang <rchang@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com>
2015-07-01spi: davinci_spi: Move header code to driverJagan Teki
Move the header code into driver for more readable and easy to access it. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Rex Chang <rchang@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com>
2015-03-30spi: davinci: Remove duplicate code to set bus and cs for slaveAxel Lin
It's done in spi_alloc_slave(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-06-19spi: davinci: Fix register address for SPI1_BUSAxel Lin
Fix a trivial copy-paste bug. Signed-off-by: Axel Lin <axel.lin@ingics.com>
2014-04-17spi: davinci: add support for multiple bus and chip selectKaricheri, Muralidharan
Currently davinci spi driver supports only bus 0 cs 0. This patch allows driver to support bus 1 and bus 2 with configurable number of chip selects. Also defaults are selected in a way to avoid regression on other platforms that uses davinci spi driver and has only one spi bus. Signed-off-by: Rex Chang <rchang@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2013-03-19spi: Use spi_alloc_slave() in each SPI driverSimon Glass
Rather than each driver having its own way to allocate a SPI slave, use the new allocation function everywhere. This will make it easier to extend the interface without breaking drivers. Signed-off-by: Simon Glass <sjg@chromium.org>
2010-07-05Davinci: SPI: add the missing v2 patch changesNick Thompson
Two Indentation fixes. Catch requests for full-duplex transfers when driver configured for half-duplex operation only. Signed-off-by: Nick Thompson <nick.thompson@ge.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-22Davinci: SPI performance enhancementsNick Thompson
The following restructuring and optimisations increase the SPI read performance from 1.3MiB/s (on da850) to 2.87MiB/s (on da830): Remove continual revaluation of driver state from the core of the copy loop. State can not change during the copy loop, so it is possible to move these evaluations to before the copy loop. Cost is more code space as loop variants are required for each set of possible configurations. The loops are simpler however, so the extra is only 128bytes on da830 with CONFIG_SPI_HALF_DUPLEX defined. Unrolling the first copy loop iteration allows the TX buffer to be pre-loaded reducing SPI clock starvation. Unrolling the last copy loop iteration removes testing for the final loop iteration every time round the loop. Using the RX buffer empty flag as a transfer throttle allows the assumption that it is always safe to write to the TX buffer, so polling of TX buffer full flag can be removed. Signed-off-by: Nick Thompson <nick.thompson@ge.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-08DaVinci: Improve DaVinci SPI speed.Delio Brignoli
I have updated this patch based on the comments [1] by Wolfgang Denk and removed unused variables. [1][http://lists.denx.de/pipermail/u-boot/2010-May/071728.html] Reduce the number of reads per byte transferred on the BUF register from 2 to 1 and take advantage of the TX buffer in the SPI module. On LogicPD OMAP-L138 EVM, SPI read throughput goes up from ~0.8Mbyte/s to ~1.3Mbyte/s. Tested with a 2Mbyte image file. Remove unused variables in the spi_xfer() function. Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-03-12Prepare v2010.03-rc1Wolfgang Denk
Coding style cleanup, update CHANGELOG. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-02-12TI DaVinci: Driver for the davinci SPI controllerSekhar Nori
This adds a driver for the SPI controller found on davinci based SoCs from Texas Instruments. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>