summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc3/dwc3-generic.c
AgeCommit message (Collapse)Author
2020-05-30usb: dwc3: add make compatible for rockchip platformFrank Wang
RK3399 Type-C PHY is required that must hold whole USB3.0 OTG controller in resetting to hold pipe power state in P2 before initializing the PHY. This commit fixed it and added device compatible for rockchip platform. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-12usb: dwc3: Add versal compatibility string to dwc3 glue idsSiva Durga Prasad Paladugu
Xilinx Versal platform uses dwc3 and hence its compatible string needs to be added to dwc3 glue ids. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-05-02usb: dwc3: use the phy bulk API to get physChunfeng Yun
Get a group of phys by the phy bulk API Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-03-30usb: Migrate to support live DT for some driverKever Yang
Use ofnode_ instead of fdt_ APIs so that the drivers can support live DT. This patch updates usb_get_dr_mode() and usb_get_maximum_speed() to use ofnode as parameter instead of fdt offset. And all the drivers who use these APIs update to use live dt APIs at the same time. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-20dwc3-generic: Add support for AM654 USB controllerVignesh Raghavendra
AM654 has DWC3 USB controller that is very similar to other TI SoCs. Add a new compatible to enable the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-02common: Move ARM cache operations out of common.hSimon Glass
These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-10-31dwc3-generic: Don't fail probe if clk/reset entries are absentVignesh Raghavendra
Some boards don't populate clk/reset entries as these are are optional as per binding documentation. Therefore, don't fail driver probe if clk/reset entries are absent in DT. This fixes fastboot failures seen due to enabling of CONFIG_CLK on AM57xx Fixes: e8e683d33b0c ("board: ti: am57xx-idk: Configure the CDCE913 clock synthesizer") Reported-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-10-24usb: dwc3: Add dwc3_of_parse() to get quirks information from DTJean-Jacques Hiblot
Add a new function that read quirk and configuration information from the DT. The goal is to allow platforms using their own version of DWC3 driver to migrate to the generic DWC3 driver. The function is adapted from the function dwc3_get_properties() in the linux dwc3 driver introduced in commit c5ac6116db35d. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24usb: dwc3-generic: if no max speed is specified in DT, assume super speedJean-Jacques Hiblot
There is no need to fail if the maximum speed is not specified. If the speed is not specified, do the same as linux and assume super speed. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24usb: dwc3-generic: add a new host driver that uses the dwc3 coreJean-Jacques Hiblot
Currently the host driver used by dwc3-generic is "xhci-dwc3". This is a functional driver but it doesn't use the dwc3 core and, in particular, it lacks some bits that may be important. For example on the k2 platforms, it is important that the phy are properly suspended when the USB is not used anymore. The dwc3 core also has a partial support for quirks. The new driver can be used as a drop-in replacement for "xhci-dwc3". In terms of implementation, it may seem strange that 2 private structures dwc3_generic_host_priv and dwc3_generic_priv) are used. The reason for this is simply that the xhci layer expects a struct xhci_ctrl at the beginning of the private data and it seemed wasteful to include it also for the peripheral case. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24usb: dwc3-generic: factorize codeJean-Jacques Hiblot
Factor code for re-usability. This is another step toward adding host support. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24usb: dwc3-generic: use platdataJean-Jacques Hiblot
Separate platform data from the private data. This is one step toward adding host support. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-05usb: dwc3: Use UCLASS_NOP instead of UCLASS_MISC for the DWC3 generic glueJean-Jacques Hiblot
dwc3-generic has been broken since MISC uclass has been modified to scan DT sub-nodes after bind. Fixing it by a using the no-op uclass. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-05usb: dwc3-generic: remove dm_scan_fdt_dev() from the remove() callbackJean-Jacques Hiblot
There is simply no reason to do that here. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-14dwc3-generic: Add support for the am437xJean-Jacques Hiblot
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14usb: dwc3-generic: make it compatible with "ti, keystone-dwc3"Jean-Jacques Hiblot
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07dwc3-generic: Add support for the TI DWC3 glueJean-Jacques Hiblot
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07dwc3-generic: Add select_dr_mode operationJean-Jacques Hiblot
The select_dr_mode operation is executed when the glue driver is probed. The role of this optional function is to configure the operating mode of the controller at the glue level. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07dwc3-generic: Handle the PHYs, the clocks and the reset linesJean-Jacques Hiblot
This make the driver more generic. At this point this driver can replace the dwc3-of-simple implementation. Make the description in the Kconfig more generic too. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07dm: usb: create a new UCLASS ID for USB gadget devicesJean-Jacques Hiblot
UCLASS_USB_DEV_GENERIC was meant for USB devices connected to host controllers, not gadget devices. Adding a new UCLASS for gadget devices alone. Also move the generic DM code for USB gadgets in a separate file for clarity. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07dwc3_generic: do not probe the USB device driver when it's boundJean-Jacques Hiblot
The driver will be probed when usb_gadget_initialize() is called. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07usb: udc: implement DM versions of ↵Jean-Jacques Hiblot
usb_gadget_initialize()/_release()/_handle_interrupt() When DM_USB_GADGET the platform code for the USB device must be replaced by calls to a USB device driver. usb_gadget_initialize() probes the USB device driver. usb_gadget_release() removes the USB device driver. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-12-07usb: introduce a separate config option for DM USB deviceJean-Jacques Hiblot
Using CONFIG_DM_USB for this purpose prevents using DM_USB for host and not for device. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-10-28drivers: cosmetic: Convert SPDX license tags to Linux Kernel stylePatrick Delaunay
Complete in the drivers directory the work started with commit 83d290c56fab ("SPDX: Convert all of our single license tags to Linux Kernel style"). Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-05-18usb: dwc3: Add generic DWC3 glue logic driverMichal Simek
By enabling BLK by default this is the next driver which needs to get support for DM_USB. Adding generic DWC3 glue logic which only parse nodes and read device mode. Based on it probe proper host/peripheral DWC3 drivers for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-01-25 01:57:27 +0000