summaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)Author
2019-09-10usb: xhci-dwc3: Add support for dis_u2_susphy_quirkNeil Armstrong
This quirk is necessary for the Amlogic GXL SoCs otherwise the Port 2 PHY doesn't get out of suspend and U-Boot resets the board after: XHCI timeout on event type 33... cannot recover. BUG: failure at drivers/usb/host/xhci-ring.c:474/xhci_wait_for_event()! BUG! This quirk is also handled in the dwc3 core code, but until the xhci-dwc3 driver uses the dwc3 core, the quirk must be handled here to fix USB support on the Amlogic libretech-cc and libretech-ac board when a device is only plugged in the OTG port. Cc: Yuri Frolov <crashing.kernel@gmail.com> Cc: Bin Meng <bmeng.cn@gmail.com> Fixes: dc9cdf859e ("usb: dwc3: Add DWC3 controller driver support") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-22usb: r8a66597: Add optional DM VBUS regulator supportMarek Vasut
Add DM regulator support for toggling VBUS, this is useful on boards which control the VBUS e.g. through GPIO. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22usb: r8a66597: Checkpatch cleanupMarek Vasut
Fix remaining checkpatch complaints in the driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22usb: r8a66597: Add Kconfig entryMarek Vasut
Add missing Kconfig entry for the R8A66597 driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22usb: r8a66597: Convert to USB DMMarek Vasut
Convert the R8A66597 USB driver to DM and add support for DT probing. Drop support for legacy non-DM and non-DT probing, since there are no platform using that. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22usb: r8a66597: Replace R8A66597_BASE0Marek Vasut
Replace R8A66597_BASE0 with proper SYSCFG0 accesses, no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22usb: r8a66597: Remove BE supportMarek Vasut
While the USB controller can work both in LE and BE modes, there is no user for the BE mode, so drop it. If there ever is a user for it, it can be easily re-added back. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22usb: r8a66597: Replace IO accessorsMarek Vasut
Replace in{bwl}()/out{bwl}() IO accessors with read{bwl}()/write{bwl}(), to make the driver compile both on SH and ARM. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22usb: r8a66597: Make CONFIG_RZA_USB defaultMarek Vasut
No other platforms use this r8a66597 controller but RZ/A1, make RZ/A1 support the default and drop all the other SoC support to remove ifdeffery. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22usb: r8a66597: Remove CONFIG_SUPERH_ON_CHIP_R8A66597Marek Vasut
Remove CONFIG_SUPERH_ON_CHIP_R8A66597 macro, which is unused. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-11env: Move env_get() to env.hSimon Glass
Move env_get() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-08usb, ohci, pci: add DM support for PCI-based OHCI USB controllerHeiko Schocher
add new DM based PCI driver ohci-pci for PCI-based OHCI USB support. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb, ohci: add warning if none on pci foundHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb, ohci-hcd: set OHCI_USE_NPS if DM_PCIHeiko Schocher
set OHCI_USE_NPS if DM_PCI is enabled. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb, ohci: fix ohci swap register accessHeiko Schocher
commit 57faca19a82f ("drivers: USB: OHCI: allow compilation for 64-bit targets") broke ohci support for the mpc85xx based socrates board, as it removed volatile keyword from ohci_readl/writel. Fix this so usb works again on socrates board. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb, ohci-hdc: fix warning 'ohci_pci_ids' defined but not usedHeiko Schocher
var ohci_pci_ids is only used if DM_USB is not enabled. So define this varaible only if !CONFIG_IS_ENABLED(DM_USB) Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-19rockchip: xhci: Remove RK3399 supportMark Kettenis
Remove RK3399 compatible strings as this driver is no longer used on that SoC. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-19usb: xhci-dwc3: Add USB2 PHY configurationMark Kettenis
Configure USB2 PHY register based on "phy_type" property and handle all the quirks that are relevant for Rockchip RK3399 SoCs. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-19usb: dwc3-of-simple: Add support for RK3399Mark Kettenis
Add compatible string for RK3399 and enable it by default on Rockchip platforms with USB3 support. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-05usb: ehci-mx6: Fix bus enumeration for DM caseMarek Vasut
The EHCI iMX6 driver is only partly converted to DT probing and still uses a tremendous amount of hard-coded addresses. Worse, the driver uses hard-coded SoC-model-specific base addresses, which are derived from values protected by SoC-specific macros, hence the driver is also compiled for a specific SoC model. Even worse, the driver depends on specific sequential indexing of the controllers, from which it derives offsets in the PHY and ANATOP register sets. However, when the driver is probed from DT, the indexing is not correct. In fact, each controller has index 0. This patch derives the index for DT probing case from the controller base addresses, which is not the way this should be done, however it is the least intrusive approach, favorable this close to release. The necessary steps to convert this driver fully to DT probing are described inside the patch, however this should be done in the next release and depends on iMX clock driver patches. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Abel Vesa <abel.vesa@nxp.com> Cc: Adam Ford <aford173@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Vagrant Cascadian <vagrant@debian.org>
2019-05-23usb: ehci: adopt 32 bit address for CONFIG_PPCYinbo Zhu
adopt 32 bit addr in fsl_esdhc for CONFIG_PPC. So adopt 32 bit address for CONFIG_PPC. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-09usb: ohci: ohci-da8xx: Cleanup Error handling and fix flagsAdam Ford
Per feedback from Marek, he suggested better handling and to enable DM_FLAG_OS_PREPARE, this patch re-orders some of the error checking, and errors returns the error code right away and also sets DM_FLAG_OS_PREPARE. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-05usb: ohci: ohci-da8xx: Enable da850-ohci driver with DM supportAdam Ford
This patch reuses some former code for the hawkboard, combines it with some some similar DM_USB compatible code for the OHCI driver, and enables the use of the da850's OHCI controller with DM_USB compatibility. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-03usb: ohci: Re-enable commented out delayAdam Ford
There is a delay function that was commented out. This patch re-enables it, because it will be needed for da850 ohci support. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-25Convert CONFIG_USB_EHCI_MX5 to KconfigLukasz Majewski
This converts the following to Kconfig: CONFIG_USB_EHCI_MX5 Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25USB: DM: Convert i.MX5 ehci code to driver modelLukasz Majewski
This commit converts i.MX5's EHCI USB host driver to driver model (DM_USB). It is a straightforward conversion (to reuse as much code as possible), based on ehci-mx6.c code. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13configs: move CONFIG_USB_EHCI_VF to KconfigMarcel Ziswiler
Move CONFIG_USB_EHCI_VF to drivers/usb/host/Kconfig and update the one and only user thereof being colibri_vf. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-09usb: ehci-mx6: Use common code to extract dr_modeAdam Ford
There exists code in drivers/common/common.c to read the dr_mode from the device tree. This patch converts this driver to use that function to initialize the driver. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-09usb: host: Print device name when scanningIsmael Luceno Cortes
Drop the counter, it has no meaning other than being the order in which the interface is found; the name assigned to the USB host controller interface is a better indicator. Example of the original output: > USB0: USB EHCI 1.10 > scanning bus 0 for devices... 2 USB Device(s) found > scanning usb for storage devices... 1 Storage Device(s) found Patched output: > Bus usb@ee080100: USB EHCI 1.10 > scanning bus usb@ee080100 for devices... 2 USB Device(s) found > scanning usb for storage devices... 1 Storage Device(s) found Signed-off-by: Ismael Luceno <ismael.luceno@silicon-gears.com>
2019-02-20Kconfig: tegra: Migrate USB_EHCI_TEGRAPeter Robinson
Migrate USB_EHCI_TEGRA from headers to Kconfig Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Marek Vasut <marex@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peter.Chubb@data61.csiro.au Cc: Lucas Stach <dev@lynxeye.de> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Alban Bedel <alban.bedel@avionic-design.de> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-15usb: ehci-mx6: Make regulator DM_REGULATOR dependentAbel Vesa
Do the regulator related work only if the build has the DM_REGULATOR. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-01-18usb: host: Drop [e-o]hci-sunxi driversJagan Teki
Now Allwinner platform is all set to use Generic USB controller drivers, so remove the legacy sunxi drivers. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18sunxi: usb: Switch to Generic host controllersJagan Teki
Onc of key blocker for using USB Generic host controller drivers in Allwinner are CLK and RESET drivers, now these available for USB usage. So switch sunxi USB use EHCI and OHCI Generic controllers. Enabling USB is wisely a board choise, So Enable USB_OHCI_HCD where it already have USB_EHCI_HCD Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-09usb: xhci-mem: Fix scratchpad array issueYe Li
After updating the value of dev_context_ptrs[0], we should flush this from cache to memory. Otherwise the xhci controller won't use it. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-14usb: host: replace xhci-keystone driver by the generic dwc3 driverJean-Jacques Hiblot
The keystone platforms can use the generic DC3 driver. Removing the keystone-spcecific xchi driver and add the configuration options to enable the generic DWC3 driver on all K2 platforms. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07dwc3: move phy operation to core.cJean-Jacques Hiblot
Those operations can be used for peripheral operation as well as host operation. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> # Conflicts: # drivers/usb/dwc3/core.c # drivers/usb/host/xhci-dwc3.c
2018-11-26usb: s/CONFIG_DM_USB/CONFIG_IS_ENABLED(DM_USB)/Sven Schwermer
This allows to disable the USB driver model in SPL because it checks the CONFIG_SPL_DM_USB variable for SPL builds. Nothing changes for regular non-SPL builds. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
2018-11-26usb: Remove CMD_USB dependency for common codeSven Schwermer
Common USB code is built whenever USB is enabled (in non-SPL builds). The USB uclass is built whenever (SPL_)DM_USB is enabled. Both need to be independent from CMD_USB. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
2018-11-26usb: Introduce CONFIG_SPL_DM_USBSven Schwermer
This allows building the SPL without driver model for USB. Since CONFIG_SPL_DM_USB is enabled if and only if CONFIG_DM_USB was enabled before, this patch does not change the build behaviour. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
2018-10-29fsl/usb: Workaround for USB erratum-A005275Chris Packham
Workaround makes FS as default mode on all affected socs. Add support to check erratum-A005275 validity for an soc. This info is required to determine whether a given soc is affected by this erratum. Add quirk for this erratum "has_fsl_erratum_a005275" . This quirk is used to enable workaround for the errata Force FS mode as default by: - making EPS as FS - setting PFSC bit to disable HS chirping This workaround can be disabled by mentioning "no_erratum_a005275" in hwconfig string Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-30usb: ehci-msm: Add init_after_reset for CI_UDCRamon Fried
MSM uses the chipidea controller IP, however it requires to reinit the phy after controller reset. in EHCI mode there's a dedicated callback for it. In device mode however there's no such callback. Add implementaion of ci_init_after_reset() to implement the above requirement in case CI_UDC driver is used. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30ehci: msm: use init_type in probeRamon Fried
Change ehci_usb_probe() function to initialize the USB according to the init_type provided. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30ehci: msm: switch to generic PHY uclassRamon Fried
All the underlying USB PHY was handled in the ehci driver. Use the generic phy API instead. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30ehci: msm: Add missing platdataRamon Fried
platdata_auto_alloc_size was not initialized in structure. Caused null pointer dereference when configuring device as gadget. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30ehci: Replace board_prepare_usb with board_usb_initRamon Fried
Use standard board_usb_init() instead of the specific board_prepare_usb. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-15usb: ehci-generic: Add vbus-supply regulator supportPatrice Chotard
Add vbus-supply regulator support. On some board vbus is not controlled by the phy but by an external regulator. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-29usb: dwc2: Add reset ctrl to driverLey Foon Tan
Add code to reset all reset signals as in usb DT node. A reset property is an optional feature, so only print out a warning and do not fail if a reset property is not present. If a reset property is discovered, then use it to deassert, thus bringing the IP out of reset. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-08-28usb: ehci: Add PHY support to ehci-pciMarek Vasut
Add support for operating a PHY attached to ehci-pci. There are systems where the EHCI controller is internally wired to a PCI bus and has a PHY connected to it as well, ie. the R-Car Gen2. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-08-28usb: ehci: Make the PHY handling genericMarek Vasut
Pull out the EHCI PHY functions into the ehci-hcd.c to let other EHCI drivers use them. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-07-05sunxi: A64: OHCI: prevent turning off shared USB clockAndre Przywara
On the A64 the clock for the first USB controller is actually the parent of the clock for the second controller, so turning them off in that order makes the system hang. Fix this by only turning off *both* clocks when the *last* OHCI controller is brought down. This covers the case when only one controller is used. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
generated by cgit (git 2.34.1) at 2025-01-06 21:12:08 +0000