summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2018-12-14usb: musb-new: Allow the diver not to use the set_phy_power() callbackJean-Jacques Hiblot
The set_phy_power() callback is part of struct omap_musb_board_data. This structure is part of the platform data passed to the musb-new driver. This does not really fit with the Driver Model, so allow not to use struct omap_musb_board_data to turn the phy on or off. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14dwc3-generic: Add support for the am437xJean-Jacques Hiblot
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14usb: host: replace xhci-keystone driver by the generic dwc3 driverJean-Jacques Hiblot
The keystone platforms can use the generic DC3 driver. Removing the keystone-spcecific xchi driver and add the configuration options to enable the generic DWC3 driver on all K2 platforms. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14usb: dwc3-generic: make it compatible with "ti, keystone-dwc3"Jean-Jacques Hiblot
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14usb: musb: Remove legacy CONFIG_USB_DA8XXAdam Ford
There don't appear to be any boards enabling CONFIG_USB_DA8XX, and there is a newer version of the MUSB driver, so let's remove the legacy version of it. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-14usb: musb: Remove Legacy CONFIG_USB_DAVINCIAdam Ford
This patch removes CONFIG_USB_DAVINCI. It's a legacy option that isn't defined anywhere, and there is a newer MUSB driver. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-14usb: Don't enable CONFIG_SPL_DM_USB for non-DM SPLMartyn Welch
When CONFIG_SPL_DM_USB was added, it was added defaulted on without protection to ensure it didn't get set for non-DM SPL builds. This leads to unexpected and confusing failures when building a DM based U-Boot but with a non-DM SPL, as the defconfig is unlikely to have CONFIG_SPL_DM_USB actively disabled. Tweak the Kconfig to not enable this setting unless CONFIG_SPL_DM is set. Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
2018-12-14usb: composite: Move bitmap related operations to ./include/linux/bitmap.hLukasz Majewski
The BITMAP related operations can now be moved to ./include/linux/bitmap.h file to mimic the Linux kernel directory tree. This change also allows to remove the lin_gadget_compat.h header file (which is a legacy code only for composite U-boot layer). It was also possible to remove #includes from several USB gadget drivers. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2018-12-14usb: gadget: f_sdp: Provide filesize env variable for downloaded imagesPetr Štetiar
Currently it's not possible to get filesize of downloaded images and it's impossible to automate some tasks in scripts. So this patch adds `filesize` environment variable with size (as hex number in bytes) of the last successfully downloaded file via `sdp` command. Cc: Lukasz Majewski <lukma@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2018-12-07dwc3-generic: Add support for the TI DWC3 glueJean-Jacques Hiblot
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07usb: dwc3: Fix a compilation error with the edison defconfigJean-Jacques Hiblot
The error is: In file included from include/part.h:10:0, from include/usb.h:18, from include/linux/usb/gadget.h:22, from drivers/usb/dwc3/ep0.c:20: include/ide.h:62:14: error: unknown type name ‘uchar’ void ide_led(uchar led, uchar status); Fixing it by including common.h that defines the uchar type. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07dwc3-generic: Add select_dr_mode operationJean-Jacques Hiblot
The select_dr_mode operation is executed when the glue driver is probed. The role of this optional function is to configure the operating mode of the controller at the glue level. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07dwc3-generic: Handle the PHYs, the clocks and the reset linesJean-Jacques Hiblot
This make the driver more generic. At this point this driver can replace the dwc3-of-simple implementation. Make the description in the Kconfig more generic too. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07dm: usb: create a new UCLASS ID for USB gadget devicesJean-Jacques Hiblot
UCLASS_USB_DEV_GENERIC was meant for USB devices connected to host controllers, not gadget devices. Adding a new UCLASS for gadget devices alone. Also move the generic DM code for USB gadgets in a separate file for clarity. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07dwc3: move phy operation to core.cJean-Jacques Hiblot
Those operations can be used for peripheral operation as well as host operation. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> # Conflicts: # drivers/usb/dwc3/core.c # drivers/usb/host/xhci-dwc3.c
2018-12-07dwc3_generic: do not probe the USB device driver when it's boundJean-Jacques Hiblot
The driver will be probed when usb_gadget_initialize() is called. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07usb: udc: implement DM versions of ↵Jean-Jacques Hiblot
usb_gadget_initialize()/_release()/_handle_interrupt() When DM_USB_GADGET the platform code for the USB device must be replaced by calls to a USB device driver. usb_gadget_initialize() probes the USB device driver. usb_gadget_release() removes the USB device driver. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-12-07usb: introduce a separate config option for DM USB deviceJean-Jacques Hiblot
Using CONFIG_DM_USB for this purpose prevents using DM_USB for host and not for device. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-12-07usb: gadget: Do not call board_usb_xxx() directly in USB gadget driversJean-Jacques Hiblot
Add 2 functions to wrap the calls to board_usb_init() and board_usb_cleanup(). This is a preparatory work for DM support for UDC drivers (DM_USB_GADGET). Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-12-02usb: Do not compile USB_STORAGE with BLK && !DM_USBAlexander Graf
The USB storage driver does not compile when CONFIG_BLK is set, but DM_USB is not set, as we're missing the DM device links for CONFIG_BLK enabled code paths. So far it looks like nobody fell into this trap, because no board enabled CONFIG_BLK and CONFIG_USB_STORAGE while not enabling CONFIG_DM_USB, but we should still reflect that dependency properly in Kconfig so that implicit enabling of CONFIG_USB_STORAGE works. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-11-26usb: s/CONFIG_DM_USB/CONFIG_IS_ENABLED(DM_USB)/Sven Schwermer
This allows to disable the USB driver model in SPL because it checks the CONFIG_SPL_DM_USB variable for SPL builds. Nothing changes for regular non-SPL builds. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
2018-11-26usb: Remove CMD_USB dependency for common codeSven Schwermer
Common USB code is built whenever USB is enabled (in non-SPL builds). The USB uclass is built whenever (SPL_)DM_USB is enabled. Both need to be independent from CMD_USB. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
2018-11-26usb: Introduce CONFIG_SPL_DM_USBSven Schwermer
This allows building the SPL without driver model for USB. Since CONFIG_SPL_DM_USB is enabled if and only if CONFIG_DM_USB was enabled before, this patch does not change the build behaviour. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
2018-10-29fsl/usb: Workaround for USB erratum-A005275Chris Packham
Workaround makes FS as default mode on all affected socs. Add support to check erratum-A005275 validity for an soc. This info is required to determine whether a given soc is affected by this erratum. Add quirk for this erratum "has_fsl_erratum_a005275" . This quirk is used to enable workaround for the errata Force FS mode as default by: - making EPS as FS - setting PFSC bit to disable HS chirping This workaround can be disabled by mentioning "no_erratum_a005275" in hwconfig string Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-10-28drivers: cosmetic: Convert SPDX license tags to Linux Kernel stylePatrick Delaunay
Complete in the drivers directory the work started with commit 83d290c56fab ("SPDX: Convert all of our single license tags to Linux Kernel style"). Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-10net.h: Include linux/if_ether.h to avoid duplicationBin Meng
There are plenty of existing drivers that have macros like ETH_ALEN defined in their own source files. Now that we imported the kernel's if_ether.h to U-Boot we can reduce some duplication. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-09-30usb:ci_udc: don't overwrite configuration on pullupRamon Fried
change writel to writebits32 in ci_pullup() in order to keep phy configuration in tact. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30usb: ehci-msm: Add init_after_reset for CI_UDCRamon Fried
MSM uses the chipidea controller IP, however it requires to reinit the phy after controller reset. in EHCI mode there's a dedicated callback for it. In device mode however there's no such callback. Add implementaion of ci_init_after_reset() to implement the above requirement in case CI_UDC driver is used. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30usb:ci_udc: Introduce init_after_reset phy functionRamon Fried
MSM variant of Chipidea must reinitalize the phy after controller reset. Introduce ci_init_after_reset() weak function that can be used to achieve the above init. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30ehci: msm: use init_type in probeRamon Fried
Change ehci_usb_probe() function to initialize the USB according to the init_type provided. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30ehci: msm: switch to generic PHY uclassRamon Fried
All the underlying USB PHY was handled in the ehci driver. Use the generic phy API instead. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30ehci: msm: Add missing platdataRamon Fried
platdata_auto_alloc_size was not initialized in structure. Caused null pointer dereference when configuring device as gadget. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30ehci: Replace board_prepare_usb with board_usb_initRamon Fried
Use standard board_usb_init() instead of the specific board_prepare_usb. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-15usb: ehci-generic: Add vbus-supply regulator supportPatrice Chotard
Add vbus-supply regulator support. On some board vbus is not controlled by the phy but by an external regulator. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-29usb: dwc2: Add reset ctrl to driverLey Foon Tan
Add code to reset all reset signals as in usb DT node. A reset property is an optional feature, so only print out a warning and do not fail if a reset property is not present. If a reset property is discovered, then use it to deassert, thus bringing the IP out of reset. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-08-28usb: ehci: Add PHY support to ehci-pciMarek Vasut
Add support for operating a PHY attached to ehci-pci. There are systems where the EHCI controller is internally wired to a PCI bus and has a PHY connected to it as well, ie. the R-Car Gen2. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-08-28usb: ehci: Make the PHY handling genericMarek Vasut
Pull out the EHCI PHY functions into the ehci-hcd.c to let other EHCI drivers use them. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-08-24Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2018-08-23usb: musb-new: Call musb_platform_exit from musb_stopJagan Teki
musb stop is musb core call during unregister or shutting down gadget or host musb. For graceful exit add musb_platform_exit on musb_stop so-that it can exit the musb platform driver as well. Tested-by: Chen-Yu Tsai <wens@csie.org> # A33-OlinuXino Tested-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-23usb: musb-new: sunxi: Add proper musb exit supportJagan Teki
musb have platform ops to do proper graceful exit, so add the exit call and move musb platform exit code instead of keeping it in driver remove. This make proper shutdown of musb where .remove will call disable, exit serially via musb_stop. Tested-by: Chen-Yu Tsai <wens@csie.org> # A33-OlinuXino Tested-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-23musb-new: sunxi: Access ahb_reset0_cfg via ccm offsetJagan Teki
reset0 is not available for sun4i, 5i and 7i so access the reset0 offset from ccm via driver data for relevant Allwinner SoC. this will eventually drop the existing ifdef for SUN6I. Tested-by: Chen-Yu Tsai <wens@csie.org> # A33-OlinuXino Tested-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-23usb: musb-new: sunxi: Allocate struct phy in privateJagan Teki
Allocate struct phy in private structure instead of allocating locally and assign it to a pointer. This eventually fix miss alignment phy which is used in another functions. Tested-by: Chen-Yu Tsai <wens@csie.org> # A33-OlinuXino Tested-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-23usb: musb-new: Fix improper musb host pointerJagan Teki
When MUSB is operating in peripheral mode, probe registering musb core using musb_register which intern return int value for validation. so there is no scope to preserve struct musb pointer but the same can be used in .remove musb_stop. So fix this by return musb_register with struct musb pointer. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Purna Chandra Mandal <purna.mandal@microchip.com> Tested-by: Chen-Yu Tsai <wens@csie.org> # A33-OlinuXino Tested-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-21usb: gadget: Add bcdDevice for the DWC3 USB Gadget ControllerJean-Jacques Hiblot
Add an entry in usb_gadget_controller_number() for the DWC3 gadget controller. Without it, it is not possible to bind the USB Ethernet driver. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-08-21usb: musb-new: omap2430: Enable DM_USB and OF supportAdam Ford
With upcoming changes that require CONFIG_BLK, this broke USB Mass Storage on the OMAP3 boards because if CONFIG_BLK is enabled, it assumes that DM_USB is enabled, but it wasn't yet available on omap3 and omap4 boards. This patch converts the OMAP2430 MUSB glue to support DM_USB and extracts the necessary information based on the device tree. It's based on the ti-musb driver, but there are enough significant differences in both the architecture and device tree entires between am33xx and OMAP3/OMAP4, that I think it makes sense to continue to keep the separate. Per doc/driver-model/usb-info.txt, the USB gadget stuff hasn't migrated to DM_USB yet, so this only supports USB Host for now. Users wanting USB Gadgets will need to disable DM_USB and leave it the old way for now. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-21usb: musb-new: omap2430: Remove dead codeAdam Ford
A bunch of code was encapsulated in #ifdef's whether or not it is building or for U-Boot. Since this code is always building for U-Boot, this patch removes the dead code. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-10Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2018-08-08usb: rockchip: on K_FW_LBA_WRITE_10 remove magic block size of 512 bytesAlberto Panizzo
As well as in K_FW_LBA_READ_10 and K_FW_LBA_ERASE_10 take device's block size from f_rkusb->desc->blksz instead of the fixed 512 bytes. Keep original behaviour of retry probing assigned block device on every host request to manage late SDCard plugs. Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
2018-08-08usb: rockchip: fix printing csw debug infoAlberto Panizzo
Workstation tool was happy while console on device were printing random numbers.. Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
2018-08-08usb: rockchip: be quiet on serial port while transferring dataAlberto Panizzo
While downloading or uploading megabytes of data we had thousands of printf in console like: transfer 0x10000 bytes done OR Uploading 0x1000 bytes This because transfers are chunked and there is no way on target side to know the overall transfer size (to print one string per overall transfer). All these prints on serial console do slow down significantly the transfer and does not offer a significant information to the developer: rkdeveloptool and Rockchip original tool do use small chunks read/writes on big transfers. This allows on workstation to print percentage of transfer complete and as well offers to developer the information about: transfer is running OK. On error, either the percentage will stop or an error will be shown on workstation console. Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
generated by cgit (git 2.34.1) at 2024-12-29 04:16:18 +0000