summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2014-11-13Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2014-11-13sun6i: ehci: Add sun6i ehci supportHans de Goede
Add support for the 2 ehci controllers found on the sun6i (A31) soc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Marek Vasut <marex@denx.de>
2014-11-13sunxi: ehci: Add proper Kconfig options to select the usb Vbus gpio-sHans de Goede
Add proper Kconfig options to select the usb Vbus gpio-s, besides moving to Kconfig being the right thing to do, an added advantage of this is that it allows for boards without Vbus gpio-s. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-11-11Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2014-11-12usb: UniPhier: add UniPhier on-chip EHCI host driver supportMasahiro Yamada
Support EHCI host driver used on Panasonic UniPhier platform. Since Device Tree is not supported on UniPhier yet, the base address of USB cores are passed from board files (platdevice.c). TODO for me: Move the base address to device trees. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
2014-11-12usb: add basic USB configs in KconfigMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
2014-11-07usb: eth: fix MakefileRene Griessl
fix obj-y term Signed-off-by: Rene Griessl <rgriessl@cit-ec.uni-bielefeld.de>
2014-11-07usb: rmobile: Use ARRAY_SIZE(usb_base_address) instead of ↵Nobuhiro Iwamatsu
CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Marek Vasut <marex@denx.de>
2014-11-07usb: ehci: fix Interrupt on Doorbell flag of USBCMDMasahiro Yamada
CMD_IAAD (Interrupt on Async Advance Doorbell) is bit 6, not bit 5. While we are here, sort the flags. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-07usb: s3c-otg: Allow custom gusbcfgMarek Vasut
Allow passing in a custom configuration of the gusbcfg register via platform data. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@altera.com> Acked-by: Pavel Machek <pavel@denx.de> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2014-11-07usb: s3c-otg: Split out PHY controlMarek Vasut
Split the Samsung specific PHY control into a separate file and compile this into the S3C OTG driver only if used on a Samsung system. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@altera.com> Acked-by: Pavel Machek <pavel@denx.de> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2014-11-06usb: s3c-otg: Encapsulate PHY controlMarek Vasut
Encapsulate the Samsung PHY control and its register accesses into the otg_phy_init() and otg_phy_off() functions. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Stefan Roese <sr@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2014-11-06usb: s3c-otg: Remove useless includeMarek Vasut
Remove the useless inclusion of arch/arm/gpio.h , which is completely bogus in this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Stefan Roese <sr@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2014-11-05dm: sunxi: Request USB vbus gpioHans de Goede
This is necessary for the device-model enabled builds to work properly. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-11-05sunxi: Use CONFIG_MACH_SUN?I from Kconfig instead of CONFIG_SUN?IIan Campbell
Mostly automatic with: sed -i -e 's/CONFIG_\(SUN[45678]I\)/CONFIG_MACH_\1/g' $(git grep -l CONFIG_SUN[45678]I) followed by removing the relevant #defines from include/configs/sun?i.h by hand. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-11-04usb: ehci: rmobile: Collect up address dataNobuhiro Iwamatsu
R8A7791, R8A7793 and R8A7794 have same IP of USB controller. This collect up address data of each SoCs. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2014-11-04usb: ehci: rmobile: Add support R8A7793Nobuhiro Iwamatsu
R8A7793 has same IP of USB controller as R8A7791 and R8A7794 of rmobile ARM SoCs. This adds support R8A7793 to EHCI HCD of rmobile. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2014-11-04usb: Make pollable int support available outside of ehci-hcd.cHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-11-04usb: ehci: Move cache invalidation to poll_int_queueHans de Goede
Preperation patch to use poll_int_queue outside of ehci-hcd.c . Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-11-04usb: ehci: Move interrupt packet length check to create_int_queueHans de Goede
Preperation patch to use create_int_queue outside of ehci-hcd.c . Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-11-04usb: ehci: Do not disable an already disabled periodic scheduleHans de Goede
When periodic_schedules == 0, the schedule is disabled and there is no reason to disable it again. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-10-27Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini
2014-10-26Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2014-10-25ehci-hcd.c: make local functions staticJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25usb: use __weakJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-23keystone: usb: add support of usb xhciWingMan Kwok
Add support of usb xhci. xHCI controls all USB speeds of the Host mode, that is, the SS through the SS PHY, as well as the HS, FS, and LS through the USB2 PHY. xHCI replaces and supersedes all previous host HCIs (HS-only EHCI, FS/LS OHCI and UHCI), and is therefore not backwards compatible with any of them. The USB3SS’s USB Controller is fully compliant with xHC. Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-10-23arm: marvell: Move arch/kirkwood.h to arch/soc.hStefan Roese
This move makes is possible to use this header not only from kirkwood platforms but from all Marvell mvebu platforms. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-22usb: dwc2: Add driver for Synopsis DWC2 USB IP blockOleksandr Tymoshenko
This is the USB host controller used on the Altera SoCFPGA and Raspbery Pi. This code has three checkpatch warnings, but to make sure it stays at least readable and clear, these are not fixed. These bugs are in the USB request handling combinatorial logic, so any abstracting of those is out of question. Tested on DENX MCV (Altera SoCFPGA 5CSFXC6C6U23C8N) and RPi B+ (BCM2835). Signed-off-by: Oleksandr Tymoshenko <gonzo@bluezbox.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Acked-by: Pavel Machek <pavel@denx.de> Cc: Vince Bridgers <vbridger@altera.com> Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-10-22net: asix: Add support for AX88772BAlexandre Courbot
This USB device works as-is on this driver. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
2014-10-11Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD
2014-10-08Merge remote-tracking branch 'u-boot-imx/master'Albert ARIBAUD
The single file conflict below is actually trivial. Conflicts: board/boundary/nitrogen6x/nitrogen6x.c
2014-10-06usb: gadget: fastboot: terminate commands with NULLEric Nelson
Without NULL termination, various commands will read past the end of input. In particular, this was noticed with error() calls in cb_getvar and simple_strtoul() in cb_download. Since the download callback happens elsewhere, the 4k buffer should always be sufficient to handle command arguments. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06usb: musb-new: core: set MUSB_POWER_HSENAB in MUSB_POWER for host modeDaniel Mack
This bit allows the MUSB controller to negotiate for high-speed mode when the device is reset by the hub. If unset, Babble errors occur with high-speed mass storage devices right after the first packet. This condition is not caught by the interrupt handles in U-Boot, so no recovery is done, and the USB communication is stuck. To fix this, set the bit unconditionally, not only for CONFIG_USB_GADGET_DUALSPEED but also for host-only modes. Signed-off-by: Daniel Mack <zonque@gmail.com>
2014-10-06usb: tegra: ULPI regression on tegra20Marcel Ziswiler
Trying to enumerate USB devices connected via ULPI to T20 failed as follows: USB2: ULPI integrity check failed Git bisecting revealed the following commit being at odds: commit 2d34151f7501ddaa599897f0d89ad576126b03eb usb: tegra: refactor PHY type selection Looking at above commit one quickly identifies a copy paste error which this patch fixes. Happy ULPIing again (;-p). Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2014-10-06usb: gadget: fastboot: explicitly set radix of maximum download sizeEric Nelson
The processing of the max-download-size variable requires a radix specifier, or the fastboot host tool will interpret it as an octal number. See function get_target_sparse_limit() in file fastboot/fastboot.c in the AOSP: https://android.googlesource.com/platform/system/core/+/master Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06usb: gadget: fastboot: add max-download-size variableEric Nelson
Current Android Fastboot seems to use 'max-download-size' instead of 'downloadsize' variable to indicate the maximum size of sparse segments. See function get_target_sparse_limit() in file fastboot/fastboot.c in the AOSP: https://android.googlesource.com/platform/system/core/+/master Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06usb: ci_udc: respect CONFIG_USB_GADGET_DUALSPEEDEric Nelson
Force full-speed (12 Mbit/s) operation if CONFIG_USB_GADGET_DUALSPEED is not defined. The controller is capable of high-speed (480 Mbit/s) operation, but some designs may require the use of lower-speed operation. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06usb: gadget: fastboot: improve download progress barBo Shen
When download is ongoing, if the actual size of one transfer is not the same as BYTES_PER_DOT, which will cause the dot won't print anymore. Then it will let the user thinking it is stuck, actually it is transfering without dot printed. So, improve the method to show the progress bar (print dot). Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Marek Vasut <marex@denx.de>
2014-10-06usb: f_mass_storage: set removable flag in do_inquiry based on LUNEric Nelson
Without this flag, tools like Alex Page's USB Image Tool won't see drives exposed over USB Gadget as removable, and won't allow access to them. http://www.alexpage.de/usb-image-tool/ The code was pulled from the main-line kernel: drivers/usb/gadget/function/f_mass_storage.c Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06usb: dfu: add fullspeed support for DFUHeiko Schocher
DFU now can use also fullspeed. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Liu Bin <b-liu@ti.com> Cc: Lukas Stockmann <lukas.stockmann@siemens.com>
2014-10-06usb: dfu: thor: gadget: Remove dead codeLukasz Majewski
This code is not used anymore in the current DFU implementation and can be safely removed. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2014-10-06usb: ehci: Make periodic_schedules a per controller variableHans de Goede
Periodic schedules tracks how many int_queue-s are active, and decides whether or not to en/disable the periodic schedule based on this. This is clearly a per controller thing. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-10-06usb: ehci: poll_int_queue check real qtd, not the overlayHans de Goede
When we first start an int queue, the qh's overlay area is all zeros. This gets filled by the hc with the actual qtd values as soon as it advances the queue, but we may call poll_int_queue before then, in which case we would think the transfer has completed as the hc has not yet copied the qt_token to the overlay, so the active flag is not set. This fixes this by checking the actual qtd token, rather then the overlay. This also fixes a (theoretical) race where we see the completion in the overlay and free and re-use the qtd before the hc has completed writing back the overlay to the actual qtd. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-10-06usb: ehci: Add missing cache flush to destroy_int_queueHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-10-06usb: ehci: Properly set hub devnum and portnr with usb-1 hubs in the chainHans de Goede
For full / low speed devices we need to get the devnum and portnr of the tt, so of the first upstream usb-2 hub, not of the parent device (which may be a usb-1 hub). Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-09-29usb: ehci-mx6: Rename the USB register base addressYe.Li
The mx6sl/mx6sx has 2 OTG and 1 host. So they have name "USBO2H_USB_BASE_ADDR" in imx-regs.h. The driver hard codes the USB base address name to "USBOH3", which causes the driver failed to build for mx6sl/mx6sx. This patch uniform the address name to "USB_BASE_ADDR" for all mx6 series. Signed-off-by: Ye.Li <B37916@freescale.com>
2014-09-29usb: ehci: mxs: Add board-specific callbacksMarek Vasut
Add board-specific callbacks for enabling/disabling port power into the MXS EHCI controller driver. This is in-line with the names of callbacks on other systems. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2014-09-24cosmetic: replace MIN, MAX with min, maxMasahiro Yamada
The macro MIN, MAX is defined as the aliase of min, max, respectively. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-09-24kconfig: add blank Kconfig filesMasahiro Yamada
This would be useful to start moving various config options. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2014-09-24usb/gadget: fastboot: minor cleanupSteve Rae
- update static function - additional debugging statements - update "fastboot command" information - add missing include file - update spelling Signed-off-by: Steve Rae <srae@broadcom.com>
generated by cgit (git 2.34.1) at 2024-12-27 21:40:02 +0000