summaryrefslogtreecommitdiff
path: root/drivers/video/Kconfig
AgeCommit message (Collapse)Author
2017-09-12video: add config option to skip framebuffer clearRob Clark
The use-case is that the thing that loaded u-boot already put a splash image on screen. And we want to preserve that until grub boot menu takes over. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-09-12video: simplefbRob Clark
Not really qcom specific, but for now qcom/lk is the one firmware that is (afaiu) setting up the appropriate dt node for pre-configured display. Uses the generic simple-framebuffer DT bindings so this should be useful on other platforms. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-09-12video: add STM32 LTDC display controllerPhilippe CORNU
The STM32 LTDC display controller provides a parallel digital RGB and signals for horizontal, vertical synchronization, Pixel Clock and Data Enable as output to interface directly to a variety of LCD and TFT panels. The LTDC main features are: - 24-bit RGB Parallel Pixel Output, Programmable timings & polarity for HSync, VSync and Data Enable. - 2 layers with Blending, Color Keying, Window position & size, Dithering, Background color, Color Look-Up Table (CLUT). - Supported layer color formats: ARGB8888, RGB888, RGB565, ARGB1555, ARGB4444, L8 CLUT, AL44 & AL88 This LTDC driver: - supports: RGB parallel output with timings & polarity, 1 layer in RGB565. - supports but with hard-coded configurations: blending, window position & size (crop), background color. - does not support yet: rgb888, argb8888, 8-bit clut, dithering. This LTDC driver is compatible with all stm32 platforms with the LTDC IP and has been tested on stm32 f746-disco board. Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
2017-09-12dm: backlight: Add a driver for GPIO backlightPatrick Delaunay
Add a driver for GPIO backlights. It understands the standard device tree binding. It can be used with simple-panel when PWM is not necessary. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2017-09-12dm: backlight: Add CONFIG_BACKLIGHT_PWMPatrick Delaunay
Add a config to select individually the driver for PWM backlights. Manage "depends on" to be backyard compatible. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2017-08-07video: Drop the ct69000 driverBin Meng
This is not used in U-Boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-05-15rockchip: video: introduce VIDEO_DW_HDMI and select for Rockchip HDMIPhilipp Tomsich
Instead of having drivers/video/rockchip/Kconfig point outside of its hierarchy for dw_hdmi.o, we should use a configuration-option to include the Designware HDMI support. This change introduces a new config option (not to be selected via menuconfig, but to be selected from a dependent video driver's configuration option) that enables dw_hdmi.o and selects it whenever the HDMI support for Rockchip SoCs is selected. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: video: Kconfig: Add Kconfig for rockchip video drivereric.gao@rock-chips.com
1. add Kconfig for rockchip video driver, so that video port can be selected as needed. 2. move VIDEO_ROCKCHIP option to new Kconfig for concision. Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Drop indenting in Kconfig: Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30Convert CONFIG_SYS_WHITE_ON_BLACK to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SYS_WHITE_ON_BLACK Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Make this default y on various SoCs] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-14at91: video: Support driver-model for the HLCD driverSongjun Wu
Add driver-model support to this driver. Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
2017-04-14video: fsl_dcu_fb: fix framebuffer to the end of memoryStefan Agner
Fix the framebuffer location to the very end of the available memory. This allows to remove the area from available memory for the kernel, which in turn allows to display the splash screen through the Linux kernel boot process. Ideas has been taken from the sunxi display driver, e.g. 20779ec3a5 ("sunxi: video: Dynamically reserve framebuffer memory") Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
2017-04-14Convert CONFIG_FSL_DCU_FB to KconfigSanchayan Maity
Rename CONFIG_FSL_DCU_FB to CONFIG_VIDEO_FSL_DCU_FB and convert it to Kconfig. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Reviewed-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Alison Wang <alison.wang@nxp.com>
2016-12-16video: Kconfig: Add VIDEO_IPV3 entryJagan Teki
Added kconfig entry for CONFIG_VIDEO_IPV3 driver. Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-23Convert CONFIG_CONSOLE_SCROLL_LINES to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_CONSOLE_SCROLL_LINES Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-23Convert CONFIG_CONSOLE_EXTRA_INFO to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_CONSOLE_EXTRA_INFO Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-23Convert CONFIG_VIDEO_SW_CURSOR to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_VIDEO_SW_CURSOR Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Re-convert, find all the cases where this is off] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-23Convert CONFIG_VGA_AS_SINGLE_DEVICE to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_VGA_AS_SINGLE_DEVICE Once we migrate to driver model for video, we should be able to drop this option. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-23Convert CONFIG_SYS_CONSOLE_BG_COL et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SYS_CONSOLE_BG_COL CONFIG_SYS_CONSOLE_FG_COL Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-23Convert CONFIG_VIDEO_CT69000 to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_VIDEO_CT69000 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-23Convert CONFIG_CFB_CONSOLE_ANSI to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_CFB_CONSOLE_ANSI Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-23Convert CONFIG_CFB_CONSOLE to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_CFB_CONSOLE Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-23Convert CONFIG_LCD to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_LCD Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-10-23Convert CONFIG_VIDEO to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_VIDEO Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-10-12dm: video: Add driver for coreboot framebuffer deviceBin Meng
This adds a DM driver for coreboot framebuffer device. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11dm: x86: video: Add a driver-model driver for ivybridge graphicsSimon Glass
At present we use the legacy vesa driver for graphics. Add a driver which supports driver model. This can be probed only when needed, removing the need to start up the display if it is not used. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: video: Fix typo in broadwell KconfigSimon Glass
'enabled' should be 'enables'. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17x86: broadwell: Add video supportSimon Glass
Add a video driver for Intel's broadwell integrated graphics controller. This uses a binary blob for most init, with the driver just performing a few basic tasks. This driver supports VESA as the mode-setting mechanism. Since most boards don't support driver model yet with VESA, a special case is added to the Kconfig for broadwell. Eventually all boards will use driver model and this can be removed. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
2016-02-16tegra: video: Move the check for CONFIG_OF_CONTROL to KconfigSimon Glass
We can check this in Kconfig now. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-02-16tegra: video: Rename CONFIG_VIDEO_TEGRA to CONFIG_VIDEO_TEGRA20Simon Glass
This option refers only to the tegra20 video driver, so name it as such to avoid confusion with tegra124. Also move this option to Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-02-16tegra: nyan-big: Move the LCD driver to driver modelSimon Glass
Adjust the driver to use driver model. The SOR becomes a bridge device. We use the normal simple_panel driver to handle the display itself. We also need to enable some options such as regulators, PWMs and DM_VIDEO itself. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-02-11dm: video: Add a temporary work-around for old stdout varSimon Glass
Boards with a saved environment may use 'lcd' in their stdout environment variable, expecting that this will enable output to the LCD. When the board moves to use driver model for video, this will no-longer work. Add a work-around to fix this. A warning messages is printed, and we will remove the work-around at the end of 2016. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Tested-by: Stephen Warren <swarren@nvidia.com>
2016-01-30video: Add a console driver that uses TrueType fontsSimon Glass
The existing 8x16 font is adequate for most purposes. It is small and fast. However for boot screens where information must be presented to the user, the console font is not ideal. Common requirements are larger and better-looking fonts. This console driver can use TrueType fonts built into U-Boot, and render them at any size. This can be used in scripts to place text as needed on the display. This driver is not really designed to operate with the command line. Much of U-Boot expects a fixed-width font. But to keep things working correctly, rudimentary support for the console is provided. The main missing feature is support for command-line editing. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-01-30video kconfig console_normalSimon Glass
Signed-off-by: Simon Glass <sjg@chromium.org> [agust: rebased on current master] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-01-26video: add CONFIG_I2C_EDID and disable CONFIG_DISPLAY by defaultAnatolij Gustschin
Enabling CONFIG_DISPLAY breaks building for some architectures (microblaze-generic), so we disable CONFIG_DISPLAY in Kconfig by default and enable this option in defconfigs. CONFIG_DISPLAY depends on CONFIG_I2C_EDID, so add and enable it in defconfigs, too. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reported-by: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-01-23video: Add support for Armada XP LCD controllerStefan Roese
This patch adds basic support for the LCD controller of the Marvell Armada XP SoC. An AXP based custom board port will be added later, to use this driver to display a splash screen via the bmp command later. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> [agust: rebased] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-01-21rockchip: video: Add a display driver for rockchip HDMISimon Glass
Some Rockchip SoCs support HDMI output. Add a display driver for this so that these displays can be used on supported boards. Unfortunately this driver is not fully functional. It cannot reliably read EDID information over HDMI. This seems to be due to the clocks being incorrect - the I2C bus speed appears to be up to 100x slower than the clock settings indicate. The root cause may be in the clock logic. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21dm: video: Repurpose the 'displayport' uclass to 'display'Simon Glass
The current DisplayPort uclass is too specific. The operations it provides are shared with other types of output devices, such as HDMI and LVDS LCD displays. Generalise the uclass so that it can be used with these devices as well. Adjust the uclass to handle the EDID reading and conversion to display_timing internally. Also update nyan-big which is affected by this. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-20sandbox: Move CONFIG_VIDEO_SANDBOX_SDL to KconfigSimon Glass
Move this option to Kconfig. This is quite simple as only sandbox uses the driver. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20dm: video: Add a driver for a rotated text consoleSimon Glass
Sometimes the console must be rotated. Add a driver which supports rotating the text clockwise to 90, 180 and 270 degrees. This can support devices where the display is rotated for mechanical reasons. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20dm: video: Add a video uclassSimon Glass
U-Boot has separate code for LCDs and 'video' devices. Both now use a very similar API thanks to earlier work by Nikita Kiryanov. With the driver- model conversion we should unify these into a single uclass. Unfortunately there are different features supported by each. This implementation provides for a common set of features which should serve most purposes. The intent is to support: - bitmap devices with 8, 16 and 32 bits per pixel - text console wih white on black or vice versa - rotated text console - bitmap display (BMP format) More can be added as additional boards are ported over to use driver model for video. The name 'video' is chosen for the uclass since it is more generic than LCD. Another option would be 'display' but that would introduce a third concept to U-Boot which seems like the wrong approach. The existing LCD and video init functions are not needed now, so this uclass makes no attempt to implement them. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
2015-08-14Merge git://git.denx.de/u-boot-x86Tom Rini
2015-08-14video: vesa: Correct a typo in the Kconfig VESA mode stringBin Meng
There is one typo in the VESA mode 105h string. Correct it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-08-14video: Add support for the ANX9804 parallel lcd to dp bridge chipHans de Goede
Add support for the ANX9804 bridge chip, which can take pixel data coming from a parallel LCD interface and translate it on the fly into a DP interface for driving eDP TFT displays. It uses I2C for configuration. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Anatolij Gustschin <agust@denx.de>
2015-08-12drivers: hierarchize drivers Kconfig menuMasahiro Yamada
The menuconfig for drivers are getting more and more cluttered and unreadable because too many entries are displayed in a single flat menu. Use hierarchic menu for each category. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Update to apply again in a few places, drop USB hunk] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-05dm: video: Add support for video bridgesSimon Glass
A video bridge typically converts video from one format to another, e.g. DisplayPort to LVDS. Add driver model support for these with a simple interface to control activation and backlight. The uclass supports GPIO control of power and reset lines. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-04x86: Move FRAMEBUFFER_SET_VESA_MODE etc to video KconfigBin Meng
CONFIG_FRAMEBUFFER_SET_VESA_MODE and CONFIG_FRAMEBUFFER_VESA_MODE are not x86-specific, so move them to drivers/video/Kconfig and make them depend on VIDEO_VESA driver. Some cosmetic fixes are applied to the Kconfig help text as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04video: Kconfig: Make VESA driver avaiable for non-x86 boardsBin Meng
There is no reason to prevent CONFIG_VIDEO_VESA driver working on non-x86 boards, so remove such limitation. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-13tegra: video: support eDP displays on Tegra124 devicesSimon Glass
Connect up the clocks and the eDP driver to make these displays work with Tegra124-based devices. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-05-13dm: video: Add a uclass for display portSimon Glass
eDP (Embedded DisplayPort) is a standard widely used in laptops to drive LCD panels. Add a uclass for this which supports a few simple operations. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-01-23x86: Drop the x86_fb driverSimon Glass
Now that we have a full VESA driver we may as well use that. We need to support the VESA layer being set up by early start-up code or by running a VGA ROM. Signed-off-by: Simon Glass <sjg@chromium.org>