summaryrefslogtreecommitdiff
path: root/drivers/video/Makefile
AgeCommit message (Collapse)Author
2020-07-29video: add nexell video driver (display/video driver)Stefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - nexell_display.c: Changed to DM, CONFIG_FB_ADDR can not be used anymore because framebuffer is allocated by video_reserve() in video-uclass.c. Therefore code changed appropriately. - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar). - livetree API (dev_read_...) is used instead of fdt one (fdt...). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-06-18video: make backlight and panel drivers optionalAnatolij Gustschin
Not all boards use these drivers, so allow to disable them to fix building boards with U-Boot binary image size restrictions. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-13video: add support of panel RM68200Yannick Fertré
Support for Raydium RM68200 720p dsi 2dl video mode panel. This rm68200 panel driver is based on the Linux Kernel driver from drivers/gpu/drm/panel/panel-raydium-rm68200.c. Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13video: add support of panel OTM8009AYannick Fertré
Support for Orise Tech otm8009a 480p dsi 2dl video mode panel. Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13video: add MIPI DSI host controller bridgeYannick Fertré
Add a Synopsys Designware MIPI DSI host bridge driver, based on the Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs. Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13dm: Add a dsi host uclassYannick Fertré
Display Serial Interface (DSI) host can usefully be modelled as their own uclass. DSI defines a serial bus and a communication protocol between the host and the device (panel, bridge). Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13video: add support of MIPI DSI interfaceYannick Fertré
Mipi_display.c contains a set of dsi helpers. This file is a copy of file drm_mipi_dsi.c (linux kernel). Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-04-13video: move ipuv3 files to subdirectoryAnatolij Gustschin
Place ipuv3 files and headers in custom driver subdirectory. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-01-31video: Add Meson Video Processing Unit DriverNeil Armstrong
This adds video output support for Amlogic GXBB/GXL/GXM chips. The supported ports are CVBS and HDMI (based on DW_HDMI). When using HDMI, only DMT modes are supported. There is support for simple-framebuffer (CONFIG_VIDEO_DT_SIMPLEFB) Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jorge Ramire-Ortiz <jramirez@baylibre.com> Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> [narmstrong: fixed defines alignment in meson_canvas.c] Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-09-28video: Add support for Arm's Mali Display ProcessorsLiviu Dudau
Add support for Arm Mali Display Processors DP500, DP550 and DP650. Only one layer is being used to display the console or boot logo, even if more layers are supported in the hardware. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28video: Add support for NXP's TDA19988 HDMI encoderLiviu Dudau
Add support for the NXP TDA19988 HDMI encoder as used on the Juno development board from Arm. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28video_osd: Add osd sandbox driver and testsMario Six
Add sandbox driver and tests for the new OSD uclass. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-28video_osd: Add ihs_video_out driverMario Six
Add a driver for IHS OSDs on IHS FPGAs. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-28drivers: Add OSD uclassMario Six
Some devices offer a text-based OSD (on-screen display) that can be programmatically controlled (i.e. text displayed on). Add a uclass to support such devices. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-08-11video_display: Add Xilinx LogiCore DP TXMario Six
Add a driver for the Xilinx LogiCORE DisplayPort IP core, which is a pure DP transmitter core for Xiling FPGA (no display capabilities). Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-08-11video: Sort Makefile entriesMario Six
The entries of Makefiles should be sorted, which is not the case in the video driver Makefile. Sort the entries alphabetically as far as this makes sense. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-06-17dm: video: Add an EFI framebuffer driverBin Meng
This adds a DM video driver for U-Boot as the EFI payload. The driver makes use of all necessary information from the passed EFI GOP info to create a linear framebuffer device, as if it were initialized by U-Boot itself. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-15imx31_phycore: DeleteTom Rini
This platform has been marked as orphaned since September 2013, remove. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-12video: simplefbRob Clark
Not really qcom specific, but for now qcom/lk is the one firmware that is (afaiu) setting up the appropriate dt node for pre-configured display. Uses the generic simple-framebuffer DT bindings so this should be useful on other platforms. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-09-12video: add STM32 LTDC display controllerPhilippe CORNU
The STM32 LTDC display controller provides a parallel digital RGB and signals for horizontal, vertical synchronization, Pixel Clock and Data Enable as output to interface directly to a variety of LCD and TFT panels. The LTDC main features are: - 24-bit RGB Parallel Pixel Output, Programmable timings & polarity for HSync, VSync and Data Enable. - 2 layers with Blending, Color Keying, Window position & size, Dithering, Background color, Color Look-Up Table (CLUT). - Supported layer color formats: ARGB8888, RGB888, RGB565, ARGB1555, ARGB4444, L8 CLUT, AL44 & AL88 This LTDC driver: - supports: RGB parallel output with timings & polarity, 1 layer in RGB565. - supports but with hard-coded configurations: blending, window position & size (crop), background color. - does not support yet: rgb888, argb8888, 8-bit clut, dithering. This LTDC driver is compatible with all stm32 platforms with the LTDC IP and has been tested on stm32 f746-disco board. Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
2017-09-12dm: backlight: Add a driver for GPIO backlightPatrick Delaunay
Add a driver for GPIO backlights. It understands the standard device tree binding. It can be used with simple-panel when PWM is not necessary. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2017-09-12dm: backlight: Add CONFIG_BACKLIGHT_PWMPatrick Delaunay
Add a config to select individually the driver for PWM backlights. Manage "depends on" to be backyard compatible. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2017-08-07video: Drop the ct69000 driverBin Meng
This is not used in U-Boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-07video: Drop the sm501 driverBin Meng
This is not used in U-Boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-07video: Drop the sed156x driverBin Meng
This is not used in U-Boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-07video: Drop the l5f31188 driverBin Meng
This is not used in U-Boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-06-12powerpc, 8xx: remove support for 8xxHeiko Schocher
There was for long time no activity in the 8xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8xx, so remove it (with a heavy heart, knowing that I remove here the root of U-Boot). Signed-off-by: Heiko Schocher <hs@denx.de>
2017-05-15rockchip: video: introduce VIDEO_DW_HDMI and select for Rockchip HDMIPhilipp Tomsich
Instead of having drivers/video/rockchip/Kconfig point outside of its hierarchy for dw_hdmi.o, we should use a configuration-option to include the Designware HDMI support. This change introduces a new config option (not to be selected via menuconfig, but to be selected from a dependent video driver's configuration option) that enables dw_hdmi.o and selects it whenever the HDMI support for Rockchip SoCs is selected. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-20sunxi: video: Split out TCON codeJernej Skrabec
TCON unit has similar layout and functionality also on newer SoCs. This commit splits out TCON code for easier reuse later. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-14Convert CONFIG_FSL_DCU_FB to KconfigSanchayan Maity
Rename CONFIG_FSL_DCU_FB to CONFIG_VIDEO_FSL_DCU_FB and convert it to Kconfig. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Reviewed-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Alison Wang <alison.wang@nxp.com>
2016-10-23video: Drop the sed13806 driverSimon Glass
This is not used in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-23video: Drop the s3c-fb driverSimon Glass
This is not used in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Minkyu Kang <mk7.kang@samsung.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-23video: Drop the imx25lcdc driverSimon Glass
This is not used anywhere in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-23video: Drop the smiLynxEM driverSimon Glass
This is not used in U-Boot anymore. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-12x86: coreboot: Convert to use DM coreboot video driverBin Meng
This converts coreboot to use DM framebuffer driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12x86: Convert to use DM VESA video driverBin Meng
At present only chromebook boards are converted to DM video. Other x86 boards are still using the legacy cfb_console driver. This switches to use DM version drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11dm: x86: video: Add a driver-model driver for ivybridge graphicsSimon Glass
At present we use the legacy vesa driver for graphics. Add a driver which supports driver model. This can be probed only when needed, removing the need to start up the display if it is not used. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-05-25exynos: video: Move driver files into their own directorySimon Glass
Move all the exynos video drivers into one place for ease of maintenance. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-03-17x86: broadwell: Add video supportSimon Glass
Add a video driver for Intel's broadwell integrated graphics controller. This uses a binary blob for most init, with the driver just performing a few basic tasks. This driver supports VESA as the mode-setting mechanism. Since most boards don't support driver model yet with VESA, a special case is added to the Kconfig for broadwell. Eventually all boards will use driver model and this can be removed. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
2016-02-22video: Add S3C24xx framebuffer supportMarek Vasut
Add basic framebuffer driver for the S3C24xx family of CPUs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Vladimir Zapolskiy <vz@mleia.com> V2: Keep the Makefile sorted. Acked-by: Anatolij Gustschin <agust@denx.de>
2016-02-16tegra: video: Rename CONFIG_VIDEO_TEGRA to CONFIG_VIDEO_TEGRA20Simon Glass
This option refers only to the tegra20 video driver, so name it as such to avoid confusion with tegra124. Also move this option to Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-01-30video: Add a console driver that uses TrueType fontsSimon Glass
The existing 8x16 font is adequate for most purposes. It is small and fast. However for boot screens where information must be presented to the user, the console font is not ideal. Common requirements are larger and better-looking fonts. This console driver can use TrueType fonts built into U-Boot, and render them at any size. This can be used in scripts to place text as needed on the display. This driver is not really designed to operate with the command line. Much of U-Boot expects a fixed-width font. But to keep things working correctly, rudimentary support for the console is provided. The main missing feature is support for command-line editing. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-01-30video kconfig console_normalSimon Glass
Signed-off-by: Simon Glass <sjg@chromium.org> [agust: rebased on current master] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-01-23video: Add support for Armada XP LCD controllerStefan Roese
This patch adds basic support for the LCD controller of the Marvell Armada XP SoC. An AXP based custom board port will be added later, to use this driver to display a splash screen via the bmp command later. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> [agust: rebased] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-01-21rockchip: video: Add a display driver for rockchip HDMISimon Glass
Some Rockchip SoCs support HDMI output. Add a display driver for this so that these displays can be used on supported boards. Unfortunately this driver is not fully functional. It cannot reliably read EDID information over HDMI. This seems to be due to the clocks being incorrect - the I2C bus speed appears to be up to 100x slower than the clock settings indicate. The root cause may be in the clock logic. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21dm: video: Repurpose the 'displayport' uclass to 'display'Simon Glass
The current DisplayPort uclass is too specific. The operations it provides are shared with other types of output devices, such as HDMI and LVDS LCD displays. Generalise the uclass so that it can be used with these devices as well. Adjust the uclass to handle the EDID reading and conversion to display_timing internally. Also update nyan-big which is affected by this. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21video: panel: Add a simple panel driverSimon Glass
Most panels are very simple - they just have a power supply and a backlight. Add a driver which supports this and implements the enable_backlight() method. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21dm: panel: Add a panel uclassSimon Glass
LCD panels can usefully be modelled as their own uclass. They can be probed (which powers them up ready for use). If they have a backlight, this can be enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21dm: backlight: Add a driver for a PWM backlightSimon Glass
Many backlights need to use a PWM to control the brightness. Add a driver for this. It understands the standard device tree binding. Signed-off-by: Simon Glass <sjg@chromium.org>