summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2018-08-17Convert CONFIG_VIDEO_OMAP3 to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_VIDEO_OMAP3 Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-11video_display: Add Xilinx LogiCore DP TXMario Six
Add a driver for the Xilinx LogiCORE DisplayPort IP core, which is a pure DP transmitter core for Xiling FPGA (no display capabilities). Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-08-11video: Sort Makefile entriesMario Six
The entries of Makefiles should be sorted, which is not the case in the video driver Makefile. Sort the entries alphabetically as far as this makes sense. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-08-07Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini
2018-08-01dm: panel: get timings from panelYannick Fertré
Get timings from panel instead of read device tree. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-01video: kconfig: remove DM_I2C dependency of I2C_EDIDLuis Araneda
Drop the DM_I2C dependency, as the library only implements the parsing of EDID data and doesn't depend on any driver One user of this library, the i2c command, implements support for legacy and DM I2C drivers Tested on a Zynq board, whose I2C driver is not ported yet to DM Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2018-07-31video: sunxi: de2: fix SimpleFB node creation when DE2 not probedIcenowy Zheng
Sometimes when a monitor without EDID information is plugged, the DE2 won't be probed (because of lack of timing information), but the HDMI node is probed, thus a SimpleFB node with invalid information will be populated. Also detect whether DE2 is probed when creating SimpleFB node. Fixes: be5b96f0e411 ("sunxi: setup simplefb for Allwinner DE2") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Jagan Teki <jagan@openedev.com>
2018-07-02video: arm: rpi: Add brcm,bcm2708-fb compatibleEmmanuel Vadot
When using CONFIG_OF_BOARD on rpi to use the dtb provided by the RaspberryPi Fundation, the compatible string isn't the same, resulting in not-functional video in u-boot. Signed-off-by: Oleksandr Tymoshenko <gonzo@FreeBSD.org> Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
2018-06-17dm: video: Add an EFI framebuffer driverBin Meng
This adds a DM video driver for U-Boot as the EFI payload. The driver makes use of all necessary information from the passed EFI GOP info to create a linear framebuffer device, as if it were initialized by U-Boot itself. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-06-03video: sunxi: de2: Reserve the fb region in the EFI memory mapEmmanuel Vadot
If compile with support for the efi loader we need to mark the pages allocated for the framebuffer as reserved so the kernel won't attempt to use them for other uses. Signed-off-by: Emmanuel Vadot <manu@freebsd.org> Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-05-15video: dw_hdmi: fix HSYNC and VSYNC polarity settingsVasily Khoruzhick
Currently dw_hdmi configures HSYNC polarity using VSYNC setting from EDID and vice versa. Fix it, since it breaks displays where HSYNC and VSYNC polarity differs Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
2018-05-15sunxi: video: HDMI: use correct bits for HSYNC and VSYNC polarity.Vasily Khoruzhick
HSYNC is bit 8, and VSYNC is bit 9. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
2018-05-10SPDX: Convert a few files that were missed beforeTom Rini
As part of the main conversion a few files were missed. These files had additional whitespace after the '*' and before the SPDX tag and my previous regex was too strict. This time I did a grep for all SPDX tags and then filtered out anything that matched the correct styles. Fixes: 83d290c56fab ("SPDX: Convert all of our single license tags to Linux Kernel style") Reported-by: Heinrich Schuchardt <xypron.debian@gmx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRTom Rini
We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-24Merge git://git.denx.de/u-boot-videoTom Rini
2018-04-24video-uclass: Fix logical-not-parentheses warningTom Rini
With clang-4.0 and later we see: warning: logical not is only applied to the left hand side of this bitwise operator [-Wlogical-not-parentheses] if ((!gd->flags & GD_FLG_RELOC)) ^ ~ And while the compiler suggests adding parenthesis around gd->flags, a reading of the code says that we want to know when GD_FLG_RELOC is not set and then return. Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-16video: vesa: Change default FRAMEBUFFER_VESA_MODEBin Meng
This changes the default FRAMEBUFFER_VESA_MODE to use 32-bit pixel format for better VxWorks compatibility. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-15Merge git://git.denx.de/u-boot-imxTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-15imx31_phycore: DeleteTom Rini
This platform has been marked as orphaned since September 2013, remove. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-09treewide: fix up files incorrectly marked executableFabio Estevam
Inspired by the following kernel commit: "commit 90fda63fa1156ec1bcfd7f9ca384cec221f70a21 Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Sat Apr 7 13:31:23 2018 -0700 treewide: fix up files incorrectly marked executable Joe Perches noted that we have a few source files that for some inexplicable reason (read: I'm too lazy to even go look at the history) are marked executable: drivers/gpu/drm/amd/amdgpu/vce_v4_0.c drivers/net/ethernet/cadence/macb_ptp.c A simple git command line to show executable C/asm/header files is this: git ls-files -s '*.[chsS]' | grep '^100755' and then you can fix them up with scripting by just feeding that output into: | cut -f2 | xargs chmod -x and commit it. Which is exactly what this commit does. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>" Do the same in the U-Boot source tree. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-04Merge git://git.denx.de/u-boot-sunxiTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-04sunxi: revert disabling of featuresAndre Przywara
In January some commits were introduced to mitigate the U-Boot image size issues we encountered on sunxi builds. Now with the MMC environment removed we can bring them back, as we practically don't have a size limit anymore. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-03-28video: rk3288_mipi: Combine NULL check into IS_ERR_OR_NULL()Punit Agrawal
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28video: rk3288_mipi: check in rk_mipi_ofdata_to_platdataHeinrich Schuchardt
The error checking should also catch the case that no range has beeen defined. syscon_get_first_range() returns NULL if no range is defined. cf. rk3399_mipi.c Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28video: rk3399_mipi: Combine NULL check into IS_ERR_OR_NULL()Punit Agrawal
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28video: rk3399_mipi: correct error checkingHeinrich Schuchardt
Pointers are never negative. Use macro IS_ERR() for checking. cf. rk3288_mipi.c Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-19video: stm32: stm32_ltdc: set the blending factoryannick fertre
Set the blending factor regarding the pixel format Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: stm32: stm32_ltdc: missing set of line interrupt positionyannick fertre
Set LIPCR (line interrupt position conf) register with line length. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: stm32: stm32_ltdc: set rate of the pixel clockyannick fertre
pxclk is useless to set pixel clock. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: stm32: stm32_ltdc: update file header & footeryannick fertre
Modified copyright & driver name. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: stm32: stm32_ltdc: add resetyannick fertre
Add reset of LTDC display controller. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: exynos: remove redundant assignmentsHeinrich Schuchardt
No need to initialize variables if the next usage is an assignment. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-19video, da8xx-fb: fix time out in wait_for_event()Heinrich Schuchardt
If an event does not occur the current coding stays in an endless loop. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-19video: stb_truetype: simplify expressionHeinrich Schuchardt
Eliminate (x2 - x2) which is always zero. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-19video: cfb_console: simplify logical constraintHeinrich Schuchardt
(A || !A && B) == (A || B) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-09sunxi: video: mark framebuffer as EFI reserved memoryHeinrich Schuchardt
Inform the EFI subsystem that the framebuffer memory is reserved. Without the patch the AllocatePool boot service allocates memory from the framebuffer which will will be overwritten by screen output. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-06video: indicate code page of bitmap fontsHeinrich Schuchardt
Add comments clarifying that the bitmap fonts support code page 437. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-06pwm-backlight: make power-supply as optionKever Yang
Some pwm backlight may not need 'power-supply', let's make it as option in pwm-backlight driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-06dm: video: support increased intensity (bold)Heinrich Schuchardt
Support special rendition code 0 - reset attributes. Support special rendition code 1 - increased intensity (bold). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-03-06dm: video: use constants to refer to colorsHeinrich Schuchardt
Use constants to refer to colors. Adjust initialization of foreground and background color to avoid setting reserved bits. Consistently u32 instead of unsigned for color bit mask. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-03-06dm: video: correctly clean background in 16bit modeHeinrich Schuchardt
In 16 bit mode we have to copy two bytes per pixels repeatedly and not four. Otherwise we will see a striped pattern. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-03-06dm: video: show correct colors in graphical consoleHeinrich Schuchardt
Get RGB sequence in pixels right (swap blue and red). Do not set reserved bits. qemu-system-i386 -display sdl -vga virtio and qemu-system-i386 -display sdl -vga cirrus now display the similar colors (highlighting still missing) as qemu-system-i386 -nographic Testing is possible via setenv efi_selftest test output bootefi selftest Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-03-05libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>Masahiro Yamada
Thomas reported U-Boot failed to build host tools if libfdt-devel package is installed because tools include libfdt headers from /usr/include/ instead of using internal ones. This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.h and replaces include directives: #include <libfdt.h> -> #include <linux/libfdt.h> #include <libfdt_env.h> -> #include <linux/libfdt_env.h> Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-23rockchip: video: rk_vop: migrate to livetreePhilipp Tomsich
This migrates rk_vop (the shared functions used by multiple VOP mini-drivers) to be compatible with a live tree. Unfortunately, there's (i) a lot of tree traversal needed for a VOP (as each active VOP vnode references back to the endpoints in the encoders and vice versa) to configure the connection between VOPs and encoders; (ii) the DTS binding is not too sane and one needs to walk a node's parents (the original code just assumed that the device would live 3 levels above the property linked through a phandle) until a UCLASS_DISPLAY device can be found. As part of the migration, the code for finding the enclosing display device has been changed to not assume a specific depth of nesting (i.e. we walk until we reach the root or find a matching device) and to use the newly introduced (in the same series) ofnode_get_parent() function. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-02-23rockchip: video: rk_hdmi: migrate to livetreePhilipp Tomsich
The rk_hdmi (shared functions for multiple HDMI mini-drivers) has been using devfdt_get_addr() to read the HDMI controller's IO base address. This will cause a failure with a live tree. This changes the driver to use dev_read_addr() which is safe both for flat trees and live trees. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-02-13video: ivybridge_igd: Fix compiler warningBin Meng
Fix build warning in drivers/video/ivybridge_igd.c with gcc 7.3.0: warning: 'ivb_pm_gt2' defined but not used [-Wunused-const-variable=] Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-26Merge git://git.denx.de/u-boot-sunxiTom Rini
2018-01-26video: bpp16: Disable by default on sunXiMaxime Ripard
The sunXi arm64 build has overflown, leading to the main U-boot binary overwriting the environment when flashing the new image, or even worse, overwriting itself when we're calling saveenv. Disable this command that is not critical until we can adress the issue properly. Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-26video: bpp8: Disable by default on sunXiMaxime Ripard
The sunXi arm64 build has overflown, leading to the main U-boot binary overwriting the environment when flashing the new image, or even worse, overwriting itself when we're calling saveenv. Disable this command that is not critical until we can adress the issue properly. Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
generated by cgit (git 2.34.1) at 2024-12-26 22:37:45 +0000