summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-08-12pcie: ti: add driver for AM65x PCIe RCSekhar Nori
Add driver supporting PCIe root-complex available on TI's AM65x SoC. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-12dm: core: add support for getting register address and sizeSekhar Nori
Current dev_read_*() API lacks support to get address and size of a "reg" property by name or index. Add support for the same. Livetree support has been added but not tested on real hardware. The existing unit tests testing reading address from device-tree have been updated to test address as well as size. Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-12clk: add support for clk_is_match()Sekhar Nori
Add support for clk_is_match() which is required to know if two clock pointers point to the same exact physical clock. Also add a unit test for the new API. Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-12power: domain: ti-sci-power-domain: Add device ID info to get/set_device failureNishanth Menon
Failure log for ti_sci_power_domain_on/off is as below: "ti_sci_power_domain_on: get/set_device failed (-19)" The above information is useless for debug without information on what specific device access failed. So add that information as well. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-08-12watchdog: omap_wdt: Disable DM watchdog support in SPLSuniel Mahesh
This patch disables DM watchdog support for SPL builds and uses the legacy omap watchdog driver on TI AM335x chipsets. The following build error is reported if DM watchdog support was enabled in SPL: CC spl/drivers/usb/gadget/rndis.o LD spl/drivers/usb/gadget/built-in.o LD spl/drivers/usb/musb-new/built-in.o LD spl/drivers/built-in.o LD spl/u-boot-spl arm-linux-ld.bfd: u-boot-spl section .u_boot_list will not fit in region .sram arm-linux-ld.bfd: region .sram overflowed by 440 bytes make[1]: *** [spl/u-boot-spl] Error 1 make: *** [spl/u-boot-spl] Error 2 Adjusted WATCHDOG_RESET macro accordingly. Earlier it was pointing to hw_watchdog_reset. Since CONFIG_WATCHDOG replaces CONFIG_HW_WATCHDOG, now WATCHDOG_RESET macro points to watchdog_reset. This watchdog_reset is not defined anywhere for am33xx/omap2 and needs to be defined. Fixed this by simply calling hw_watchdog_reset in watchdog_reset. Built and tested on AM335x device (BeagleboneBlack), compile tested for all other AM33xx/omap2 based boards. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org> [trini: Fix watchdog.h logic] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-12watchdog: omap_wdt: Convert watchdog driver to use DT and DMSuniel Mahesh
This patch adds device tree and driver model watchdog support, converts the legacy omap watchdog driver to driver model for TI AM335x chipsets. The following compile warning is removed: ===================== WARNING ====================== This board does not use CONFIG_WDT (DM watchdog support). Please update the board to use CONFIG_WDT before the v2019.10 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== CONFIG_HW_WATCHDOG is no more a default option for AM33XX devices after DT/DM conversion, adjusted kconfig accordingly. DM watchdog support is enabled by default in SPL. The SPL image doesn't fit into SRAM because of size constraints and build breaks with an overflow. For this reason DM watchdog support should be disabled in SPL, driver code should be adjusted accordingly to serve this purpose. Built and tested on AM335x device (BeagleboneBlack), compile tested for all other AM33xx based boards. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-08-10Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- R8A77980 V3H support
2019-08-10Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DaVinci USB updates - Various OHCI fixes - Gadget fixes
2019-08-09Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Enable SD slot on Intel Edison - Populate CSRT ACPI table for shared DMA controller on Intel Tangier - Convert Intel ICH-SPI driver to use new spi-mem ops - Enable config_distro_bootcmd for QEMU x86 - Support U-Boot as a payload for Intel Slim Bootloader - Avoid writing temporary asl files into the source tree which fixes the parallel build issue occasionally seen
2019-08-09clk: renesas: Add R8A77980 V3H clock tablesMarek Vasut
Import R8A77980 V3H clock tables from Linux 5.2.7 , commit 5697a9d3d55f. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-09pinctrl: renesas: Add R8A77980 V3H PFC tablesMarek Vasut
Import R8A77980 V3H PFC tables from Linux 5.2.7 , commit 5697a9d3d55f. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-09net: sh_eth: Fix 64bit build warningsMarek Vasut
Fix various type warnings when building this driver for 64bit machine. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-09net: sh_eth: Add R8A77980 V3H gether supportMarek Vasut
The R8A77980 V3H gether needs a few minor adjustments to the sh_eth driver, add them to support ethernet on R8A77980. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-09mmc: Move tegra loopback disable option to be under tegraTrent Piepho
This is a configuration option specific to the tegra controller. Doing it this way makes it show up directly under the tegra controller option, indented one level, as "Disable external clock loopback". The way it is now, it shows up at the end of the controller list, not indented, as if it's some kind of generic MMC configuration option. Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Tom Warren <twarren@nvidia.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09x86: ich-spi: Convert driver to spi-mem opsBernhard Messerklinger
With the introduction of the new spi-mem model operations changed slightly. The new spi-mem operations make things a bit easier to handle for ich-spi flash interface. This patch converts the ich-spi driver by using spi-mem operations. Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested on Intel CrownBay and MinnowMax Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fix compiler warnings when building the driver for 64-bit] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09bios_emulator: remove stray breakHeinrich Schuchardt
Remove a stray break which suppresses some debug messages. Indicated by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09Merge tag 'mmc-8-9' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- mmc test fix - sdhci driver fix
2019-08-09Merge tag 'u-boot-rockchip-20190809' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add rk3399 boards Khadas Edge/-V/-Captain - Add fully souce code support for rk3328 including TPL/DRAM init - Enable boot from eMMC for rk3399 rock960/ficus boards - turn on the IO supply for dw_mmc
2019-08-09mmc: tangier_sdhci: fix uninitialized pointer deref on probePeng Fan
Commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-08-09mmc: sdhci-cadence: fix uninitialized pointer deref on probePeng Fan
Commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-09mmc: s5p: fix uninitialized pointer deref on probePeng Fan
Commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-08-09mmc: pci: fix uninitialized pointer deref on probePeng Fan
Commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-08-09mmc: msm_sdhci: fix uninitialized pointer deref on probePeng Fan
Commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-08-09mmc: bcm: fix uninitialized pointer deref on probePeng Fan
Commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Matthias Brugger <mbrugger@suse.com> Cc: Thomas Fitzsimmons <fitzsim@fitzsim.org> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-08-09mmc: atmel_sdhci: fix uninitialized pointer deref on probePeng Fan
Commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-08-09mmc: zynq_sdhci: fix uninitialized pointer deref on probeMatwey V. Kornilov
Since commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Move the mmc field initialization before sdhci_setup_cfg() call to avoid crash on mmc pointer dereference. [this patch is based on commit 41a9fab8dac8 ("mmc: mv_sdhci: fix uninitialized pointer deref on probe") by Baruch Siach] Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu102/zc706)
2019-08-09mmc: Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT is selectedFaiz Abbas
Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT is selected as is being done for the U-boot case. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-08-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Remove unused bcm2835 watchdog driver (still non-DM) - Cosmetic fixup of mtk_wdt.c
2019-08-08fastboot: Remove "bootloader-version" variableSam Protsenko
As per [1], there is no such fastboot variable as "bootloader-version". Only "version-bootloader" is supported. Let's reflect this and not confuse users further. [1] https://android.googlesource.com/platform/system/core/+/refs/tags/android-q-preview-4/fastboot/README.md Fixes: 3aab70afc531d1 ("usb/gadget: add the fastboot gadget") Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-08-08fastboot: getvar: Add "is-userspace" variableSam Protsenko
As per documentation [1], Android-Q requires for bootloader to provide "is-userspace" variable. "no" value should be always returned. This patch implements this fastboot variable. [1] https://android.googlesource.com/platform/system/core/+/refs/tags/android-q-preview-4/fastboot/README.md Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-08-08usb: gadget: f_dfu.c: fix memory leakRalph Siemsen
dfu_prepare_function() allocates N+1 descriptor header structures, the last one being the "DFU Functional Descriptor". dfu_unbind() handles de-allocation, but fails to free the final one (eg. "DFU Functional Descriptor"), leading to memory leak. Fixed by incrementing counter, as in dfu_prepare_function(). Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
2019-08-08fastboot: Remove "slot-suffixes" variableSam Protsenko
"slot-suffixes" variable was dropped in fastboot tool (in [1]). Let's track AOSP/master and drop this variable in U-Boot as well. [1] https://android.googlesource.com/platform/system/core/+/42b18a518bac85c3eea14206f6cbafbd1e98a31f Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [lukma: Remove getvar_slot_suffixes() declaration] Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-08-08usb, ohci, pci: add DM support for PCI-based OHCI USB controllerHeiko Schocher
add new DM based PCI driver ohci-pci for PCI-based OHCI USB support. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb, ohci: add warning if none on pci foundHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb, ohci-hcd: set OHCI_USE_NPS if DM_PCIHeiko Schocher
set OHCI_USE_NPS if DM_PCI is enabled. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb, ohci: fix ohci swap register accessHeiko Schocher
commit 57faca19a82f ("drivers: USB: OHCI: allow compilation for 64-bit targets") broke ohci support for the mpc85xx based socrates board, as it removed volatile keyword from ohci_readl/writel. Fix this so usb works again on socrates board. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb, ohci-hdc: fix warning 'ohci_pci_ids' defined but not usedHeiko Schocher
var ohci_pci_ids is only used if DM_USB is not enabled. So define this varaible only if !CONFIG_IS_ENABLED(DM_USB) Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb: musb-new: Add support for da8xx-musbAdam Ford
With the recently added phy driver, this patch will enable the musb driver on the da8xx to operate in host mode. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-08phy: Add support for phy-da8xx-usbAdam Ford
In preparation for supporting the musb driver, this patch adds support for the usb phy associated with the musb driver. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-07pci_ep: Fix Coverity warningRamon Fried
Fix the following Coverity warning: CID 244086: Incorrect expression (BAD_COMPARE) Comparing pointer "ep_bar" against NULL using anything besides == or is likely to be incorrect. Fixes: 914026d25848 ("drivers: pci_ep: Introduce UCLASS_PCI_EP uclass") Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
2019-08-07clk: MediaTek: add hifsys entry for MT7623 SoC.Ryder Lee
This adds high speed interface subsystem - hifsys (i.e. PCIe and USB) for MT7623 SoC and enables its reset controller. The control block is shared with ethsys and accordingly rename the related defines. Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
2019-08-05rockchip: ram: add full feature rk3328 DRAM driverKever Yang
This driver supports DDR3/LPDDR3/DDR4 SDRAM initialization. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from commit https://github.com/rockchip-linux/u-boot/commit/9fb0777ec3cc6a89af9d2e0969c3bfe58306a88d with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05watchdog: mtk_wdt: Cosmetic cleanup of latest changesStefan Roese
This patch cleans up some coding style related issues in the mtk_wtd driver to make this driver comply again with the U-Boot coding style standards. The only minimal functional change is that the timeout parameter is now passed in (u64) instead of (unsigned int) from mtk_wdt_start() to mtk_wdt_set_timeout(), preserving the original value. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Shannon Barber <sbarber@dataspeedinc.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-08-05watchdog: bcm2835_wdt: Remove unused BCM283x watchdog driver and its referencesStefan Roese
The BCM2835/2836 watchdog is not used in mainline U-Boot at all. This patch removes the driver and its references (CONFIG_BCM2835_WDT) completely. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Paolo Pisati <p.pisati@gmail.com>
2019-08-02Merge https://gitlab.denx.de/u-boot/custodians/u-boot-clkTom Rini
- Port more CCF code to work with i.MX8 devices.
2019-07-31Merge tag 'u-boot-amlogic-20190731' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - sync Amlogic G12A DT with linux 5.3-rc1 - add support for 4GiB DRAM memory - add support for Amlogic G12B based Odroid-N2 - small duplicate logic fix for gxbb clock driver
2019-07-31Merge branch '2019-07-31-ti-imports'Tom Rini
- Various DaVinci fixes - Migrate am335x_boneblack_vboot to use more DM drivers - Keystone updates
2019-07-31nand: davinci: avoid out of bounds array accessHeinrich Schuchardt
The array bounds have to be checked before accessing the array element. Identified by cppcheck. Fixes: 67ac6ffaeefb ("mtd: nand: davinci: add opportunity to write keystone U-boot image") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-31Merge tag 'mmc-7-31' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
A new mmc/sd block test case Bug fixes for sdhci and mv_sdhci
2019-07-31clk: meson: remove duplicate logicHeinrich Schuchardt
First thing we check in meson_clk_set_rate_by_id() is current_rate == rate. There is not need to check it again. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
generated by cgit (git 2.34.1) at 2025-02-05 17:14:29 +0000