summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-11-11Merge tag 'u-boot-rockchip-20191110' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add support for rockchip pmic rk805,rk809, rk816, rk817 - Add rk3399 board Leez support - Fix bug in rk3328 ram driver - Adapt SPL to support ATF bl31 with entry at 0x40000 - Fix the u8 type comparision with '-1'. - Fix checkpatch warning for multi blank line and review signature.
2019-11-11Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC. - Few bug fixes and updates related to SPI, hwconfig, ethernet, fsl-layerscape, pci, icid, PSCI
2019-11-10ram: rk3328: Fix loading of skew valuesSimon South
Fix a typo that caused incorrect values to be loaded into the DRAM controller's deskew registers. Signed-off-by: Simon South <simon@simonsouth.net> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10ram: rk3328: Use correct frequency units in functionSimon South
Fix a pair of tests in phy_dll_bypass_set() that used incorrect units for the DDR frequency, causing the DRAM controller to be misconfigured in most cases. Signed-off-by: Simon South <simon@simonsouth.net> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10clk: rockchip: rk3328: Configure CPU clockSimon South
Add a call to rk3328_configure_cpu() during initialization to set the CPU-clock frequency. Signed-off-by: Simon South <simon@simonsouth.net> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10power: pmic: rk809: support rk809 pmicJoseph Chen
The RK809 is a Power Management IC (PMIC) for multimedia and handheld devices. They contains the following components: - Regulators(5*BUCKs, 9*LDOs, 2*SWITCHes) - RTC - Clocking Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10power: pmic: rk817: support rk817 pmicJoseph Chen
The RK817 is a Power Management IC (PMIC) for multimedia and handheld devices. They contains the following components: - Regulators(4*BUCKs, 1* BOOST, 9*LDOs, 1*SWITCH) - RTC - Clocking Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10power: pmic: rk805: support rk805 pmicElaine Zhang
The RK805 are a Power Management IC (PMIC) for multimedia and handheld devices. They contains the following components: - Regulators(4*BUCKs, 3*LDOs) - RTC - Clocking Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10power: pmic: rk816: support rk816 pmicElaine Zhang
The RK816 is a Power Management IC (PMIC) for multimedia and handheld devices. They contains the following components: - Regulators(4*BUCKs, 1*BOOST, 6*LDOs, 1*SWITCH) - RTC - Clocking Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10power: regulator: rk8xx: update the driver for rk808 and rk818Elaine Zhang
In order to adapt the following pmics, make the interface more compatible. Support buck and ldo suspend voltage setting and getting. Supprot buck and ldo suspend enable/disable setting and getting. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10dm: regulator: support regulator more stateJoseph Chen
support parse regulator standard property: regulator-off-in-suspend; regulator-init-microvolt; regulator-suspend-microvolt: regulator_get_suspend_enable regulator_set_suspend_enable regulator_get_suspend_value regulator_set_suspend_value Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-08Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- Assorted fixes
2019-11-08Merge branch '2019-11-07-master-imports'Tom Rini
- Add Phytium Durian Board - Assorted bugfixes - Allow for make ERR_PTR/PTR_ERR architecture specific
2019-11-08configs: spi: Add the SPI_FLASH_BAR for ESPIXiaowei Bao
Add the SPI_FLASH_BAR for the ESPI controller of FSL, this entry is missed by commit 6d8251783641 ("configs: Don't use SPI_FLASH_BAR as default") Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08usb: xhci: support 1.1 or later versionChunfeng Yun
The xHCI 1.1 version also need set Transfer Type field Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-08drivers: net: fsl_enetc: fix RGMII configurationMichael Walle
Add the missing RGMII PHY modes in which case the MAC has configure its RGMII settings. The only difference between these modes is the RX and TX delay configuration. A user might choose any RGMII mode in the device tree. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08drivers: net: fsl_enetc: set phydev->nodeMichael Walle
The saved ofnode is used by some PHY drivers to access the device tree node of the PHY. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08pci: layerscape: Only set EP CFG READY bitPankaj Bansal
In ls_pcie_ep_enable_cfg(), as part of EP setup,config ready bit of pci controller is set, so that RC can read the config space of EP. While setting the config ready bit, LTSSM_EN bit in same register was also inadvertently getting cleared. This restarts the link training between RC and EP. Update code to just set the desired CFG_READY bit (bit 0), while leaving the other bits unchanged. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Reviewed-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-07power: regulator: tps65941: add regulator supportKeerthy
The driver provides regulator set/get voltage enable/disable functions for tps65941 family of PMICs. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07power: pmic: tps65941: Add support for tps65941 family of PMICsKeerthy
Add support to bind the regulators/child nodes with the pmic. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07misc: k3_avs: Add j721e supportKeerthy
j721e SoCs have different OPP tables. Add support for the same. Note: DM Still has lot of voltages TBD hence the correct values need to be programmed once they are published. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07power: regulator: tps6236x: add support for tps6236x regulatorsTero Kristo
TPS6236x is a family of step down DC-DC converters optimized for battery powered portable applications for a small solution size. Add a regulator driver for supporting these devices. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07clk: clk-ti-sci: Notify AVS driver upon setting clock rateKeerthy
Notify AVS driver upon setting clock rate so that voltage is changed accordingly. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07misc: k3_avs: add driver for K3 Adaptive Voltage Scaling Class 0Tero Kristo
Adaptive Voltage Scaling is a technology used in TI SoCs to optimize the operating voltage based on characterization data written to efuse during production. Add a driver to support this feature for K3 line of SoCs, initially for AM65x. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07arm: add initial support for the Phytium Durian Boardliu hao
This adds platform code and the device tree for the Phytium Durian Board. The initial support comprises the UART and the PCIE. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Tom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
2019-11-07Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
- mpc85xx, socrates: Add dts, enable DM support, fix warnings, disable video
2019-11-07usb: composite: add BOS descriptor support to composite frameworkT Karthik Reddy
To add usb-3.0 support to peripheral device add BOS & SS capability descriptors to gadget composite framework. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Roger Quadros <rogerq@ti.com>
2019-11-07usb: gadget: Add gadget_is_cdns3() macroVignesh Raghavendra
Add a new bcdDevice entry for Cadence USB gadget controller similar to other controller and add gadget_is_cdns3() macro as well. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07usb: cdns3: Add TI wrapper driver for CDNS USB3 controllerVignesh Raghavendra
Add driver to handle TI specific wrapper for Cadence USB3 controller present on J721e SoC. Based on Linux driver for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07usb: cdns3: gadget: Implement udc_set_speed() callbackVignesh Raghavendra
Implement udc_set_speed() callback to limit Controller's speed to high-speed/full-speed when working with gadgets that are high-speed or full-speed only Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07usb: Add Cadence USB3 host and gadget driverVignesh Raghavendra
Add support for USB3 host and gadget driver. This is a direct sync of Linux kernel Cadence USB stack that from v5.4-rc1 release. Driver has been modified so that it compiles without errors against U-Boot code base. Features not required for U-Boot such as scatter-gather DMA and OTG interrupt handling has been dropped. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> [jjhiblot@ti.com: Add PHY support] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07usb: udc: Introduce ->udc_set_speed() methodSherry Sun
This patch was copied from kernel commit: 67fdfda4a99ed. Sometimes, the gadget driver we want to run has max_speed lower than what the UDC supports. In such situations, UDC might want to make sure we don't try to connect on speeds not supported by the gadget driver because that will just fail. So here introduce a new optional ->udc_set_speed() method which can be implemented by interested UDC drivers to achieve this purpose. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07usb: gadget: Add match_ep() op to usb_gadget_opsVignesh Raghavendra
Add match_ep() op to usb_gadget_ops similar to Linux kernel which is useful in finding a suitable ep match for the function driver. This will avoid adding more gadget_is_xxx() handling code to usb_ep_autoconfig(). Also sync usb_ep_caps struct thats is usually used in the match_ep() callback by the gadget controller driver Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-06Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DFU updates - USB Storage updates
2019-11-06pci: add DM based mpc85xx driverHeiko Schocher
add DM based PCI Configuration space access support for MPC85xx PCI Bridge. This driver is based on arch/powerpc/cpu/mpc85xx/pci.c In the old driver there is a fix for a hw issue on the TARGET_MPC8555CDS and TARGET_MPC8541CDS boards. As I have no such hardware I did not port this part. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-05mmc: fsl_esdhc_imx: Update compatible string for imx8mPeng Fan
To enable HS400(ES) and UHS for imx8m platforms, update the driver data to share with imx8qm esdhc_soc_data. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05mmc: fsl_esdhc_imx: drop redundant clock settingsPeng Fan
During mmc initialization, there are several calls to mmc_set_clock and mmc_set_ios. When mmc_power_off, the mmc->clock will be set, but the imx driver will use 400KHz. So the following calls to mmc_set_ios will set the clock several times which is redundant in fsl_esdhc_imx driver. So let's simplify to remove redundant clock settings. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05mmc: fsl_esdhc: clean up DM and non-DM codeYangbo Lu
Make DM and non-DM code clear using below structure. #if !CONFIG_IS_ENABLED(DM_MMC) <non-DM_MMC code> #else <DM_MMC code> #endif Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: always check write protect stateYangbo Lu
The QorIQ eSDHC on all platforms supports checking write protect state through register bit. So check it always. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: drop redundant code for non-removable featureYangbo Lu
Drop redundant code for non-removable feature. "non-removable" property has been read in mmc_of_parse(). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: convert to use fsl_esdhc_get_cfg_common()Yangbo Lu
The fsl_esdhc_init() was actually to get configuration of mmc_config. So rename it to fsl_esdhc_get_cfg_common() and make it common for both DM_MMC and non-DM_MMC. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: clean up bus width configuration codeYangbo Lu
This patch is to clean up bus width setting code. - For DM_MMC, remove getting "bus-width" from device tree. This has been done in mmc_of_parse(). - For non-DM_MMC, move bus width configuration from fsl_esdhc_init() to fsl_esdhc_initialize() which is non-DM_MMC specific. And fix up bus width configuration to support only 1-bit, 4-bit, or 8-bit. Keep using 8-bit if it's not set because many platforms use driver without providing max bus width. - Remove bus_width member from fsl_esdhc_priv structure. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: fix voltage validationYangbo Lu
Voltage validation should be done by CMD8. Current comparison between mmc_cfg voltages and host voltage capabilities is meaningless. So drop current comparison and let voltage validation is through CMD8. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-05mmc: fsl_esdhc: drop controller initialization in fsl_esdhc_init()Yangbo Lu
Controller initialization is not needed in fsl_esdhc_init(). It will be done in esdhc_init() for non-DM_MMC, and in esdhc_init_common() in probe for DM_MMC. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-11-04Merge tag 'u-boot-imx-20191104' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191104 ------------------- - i.MX NAND: nandbcb support for MX6UL / i.MX7 - i.MX8: support for HAB - Convert to DM (opos6ul, mccmon6) - Toradex i.MX6ull colibri - sync DTS with kernel Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/606853416
2019-11-04Merge branch '2019-11-04-ti-imports'Tom Rini
- Various CPSW related improvements, DTS resync
2019-11-04net: ti: cpsw: convert to use dev/ofnode apiGrygorii Strashko
Conver TI CPSW driver to use dev/ofnode api. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> [trini: Add <dm/ofnode.h> to provide the prototype to ofnode] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-03Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Add support for Intel FSP-S and FSP-T in binman - Correct priority selection for image loaders for SPL - Add a size check for TPL - Various small SPL/TPL bug fixes and changes - SPI: Add support for memory-mapped flash
2019-11-03nand: mxs_nand: add API for switching different BCH layoutsIgor Opaniuk
On i.MX7 in a sake of reducing the disturbances caused by a neighboring cells in the FCB page in the NAND chip, a randomizer is enabled when reading the FCB page by ROM bootloader. Add API for setting BCH to specific layout (and restoring it back) used by ROM bootloader to be able to burn it in a proper way to NAND using nandbcb command. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03mach-imx: Adding new argument for SIP call interfaceYe Li
Need to pass total 5 arguments for SIP HAB call on i.MX8MQ, so update the interface to add new argument. Signed-off-by: Ye Li <ye.li@nxp.com> [agust: fixed imx8m-power-domain build] Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Peng Fan <peng.fan@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-29 15:45:44 +0000