summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-03-23net: zynq_gem: Dont run any phy detection logic for GMII caseSiva Durga Prasad Paladugu
This patch bypasses phy detection logic for GMII interface and just depend on phy address received from DT. This patch is required as phy detection logic is different for some phys like xilinx phy which can be connected over SGMII and GMII interface. This fixes the issue of ethernet failures when xilinx phy is connected over GMII interface. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-23fpga: Simplify error path in fpga_addMichal Simek
Check !desc earlier to simplify code. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com> Reviewed-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
2018-03-22Merge git://git.denx.de/u-boot-netTom Rini
2018-03-22gpio: omap_gpio: Add DM_FLAG_PRE_RELOC flagFaiz Abbas
With DM enabled in SPL, DM_FLAG_PRE_RELOC is required for the omap_gpio driver to be bound to the gpio devices. Therefore, add DM_FLAG_PRE_RELOC flag to the omap_gpio driver. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-03-22net: Drop CONFIG_ENC28J60Tuomas Tynkkynen
Last user of this driver went away in October 2014 in commit d58a9451e7339ed4 ("ppc/arm: zap EMK boards"). Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22net: macb: remove superfluous logical constraintHeinrich Schuchardt
In if (a > =0) {...} else (a < 0) {...} the second logical constraint is superfluous. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22drivers: net: cpsw: remove superfluous assignment.Heinrich Schuchardt
In int ret = A; ret = B; the first assignment has not effect. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22lan7xxx: Require phylibAlexander Graf
The lan75xx and lan78xx drivers need to drive their phy via the generic phylib framework. Let's reflect that dependency in Kconfig, so that we don't get build errors when phylib does not get selected. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22net/phy/cortina: Add No firmware upload optionPriyanka Jain
Current Cortina phy driver assumes that firmware upload is required during initialization and is dependent on presence of corresponding macros like CONFIG_CORTINA_FW_ADDR for compilation. But Cortina phy has provision to store phy firmware in attached dedicated EEPROM. And boards designed with such EEPROM does not require firmware upload. Add CORTINA_NO_FW_UPLOAD option in cortina.c to support such boards. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22net/phy/cortina.c: Update get_phy_id implementationPriyanka Jain
Update get_phy_id() implementation in cortina.c to check for Cortina_phy by comparing device phy_id with cortina phy_id instead of relying on presence of CORTINA macros. This will allow get_phy_id to work with non-cortina phy devices which might have same phy address as Cortina device but on different bus. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22configs: ls1012a: add pfe configuration for LS1012ACalvin Johnson
Add configurations for PFE. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22drivers: net: pfe_eth: provide pfe commandsCalvin Johnson
pfe_command provides command line support for several features that support pfe, like starting or stopping the pfe, checking the health of the processor engines and checking status of different units inside pfe. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22drivers: net: pfe_eth: LS1012A PFE driver introductionCalvin Johnson
This patch adds PFE driver to U-Boot Following are the main driver files:- pfe_hw.c: provides low level helper functions to initialize PFE internal processor engines and other hardware blocks pfe_driver.c: provides initialization functions and packet send and receive functions pfe_eth.c: provides high level gemac initialization functions pfe_firmware.c: provides functions to load firmware into PFE internal processor engines. pfe_mdio.c: provides functions to initialize phy and mdio. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22drivers: net: phy: Fix aquantia compilation with DMCalvin Johnson
With CONFIG_DM_ETH enabled, aquantia driver compilation fails with below error. This patch fixes the issue by including dm.h. drivers/net/phy/aquantia.c: In function ‘aquantia_startup’: drivers/net/phy/aquantia.c:73:21: error: dereferencing pointer to incomplete type ‘struct udevice’ phydev->dev->name); ^~ Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22net: mvpp2x: add check after callocHeinrich Schuchardt
After allocating plat the pointer is checked. Afterwards name is allocated and not checked. Add the missing check to avoid a possible NULL dereference. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22net: phy: Add PHY_RTL8211E_PINE64_GIGABIT_FIX for realtek physkevans@FreeBSD.org
Setting PHY_RTL8211E_PINE64_GIGABIT_FIX forces internal rx/tx delays off on the PHY, as well as flipping some magical undocumented bits. The magic number comes from the Pine64 engineering team, presumably as a proxy from Realtek. This configuration fixes the throughput on some Pine64 models. Packet loss of up to 60-70% has been observed without this. Signed-off-by: Kyle Evans <kevans@FreeBSD.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22spi: spi_flash: do not fail silently on bad user inputLiam Beguin
Make sure the user is notified instead of silently returning an error. Signed-off-by: Liam Beguin <liambeguin@gmail.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2018-03-21phy: add support for bcm6318 usbh phyÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-03-21phy: add support for bcm6368 usbh phyÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-03-21phy: add support for bcm6358 usbh phyÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-03-21phy: add support for bcm6348 usbh phyÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-03-21dm: cpu: bmips: add BCM6362 supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-03-19Merge git://git.denx.de/u-boot-usbTom Rini
2018-03-19Merge git://git.denx.de/u-boot-sunxiTom Rini
2018-03-19nand: Remove unused ppc4xx NAND driver and referencesStefan Roese
ppc4xx support was removed some time ago. Lets remove the now unused NAND driver and all its references for this platform as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Scott Wood <oss@buserror.net>
2018-03-19clk: stm32mp1: add clock tree initializationPatrick Delaunay
add binding and code for clock tree initialization from device tree Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19clk: add driver for stm32mp1Patrick Delaunay
add RCC clock driver for STMP32MP157 - base on driver model = UCLASS_CLK - support ops to enable, disable and get rate of all SOC clock needed by U-Boot Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19reset: stm32: adapt driver for stm32mp1Patrick Delaunay
- move to livetree and allow to get address to parent - add stm32mp1 compatible for probe Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19pinctrl: stm32: update pincontrol for stmp32mp157Patrick Delaunay
- add the 2 new compatible used by STM32MP157 "st,stm32mp157-pinctrl" "st,stm32mp157-z-pinctrl" - update the mask for the port Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19pmic: add stpmu1 supportPatrick Delaunay
This driver implements register read/write operations for STPMU1. The STPMU1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF and 2 power switches. It is accessed via an I2C interface. This device is used with STM32MP1 SoCs. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19ram: stm32mp1: add driverPatrick Delaunay
Add driver and binding for stm32mp1 ddr controller and phy Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19arm: stm32: add new architecture for STM32MP familyPatrick Delaunay
- add new arch stm32mp for STM32 MPU/Soc based on Cortex A - support for stm32mp157 SOC - SPL is used as first boot stage loader - using driver model for all the drivers, even in SPL - all security feature are deactivated (ETZC and TZC) - reused STM32 MCU drivers when it is possible Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19stm32mp: stm32f7_i2c: use calloc instead of kmallocPatrick Delaunay
Kmalloc is using memalign allocation function. It is not necessary to align this structure so to save bytes, we move to calloc. And kmalloc function can't be used in SPL early stage (in board_init_f()) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19gpio: stm32f7_gpio: handle node ngpiosPatrick Delaunay
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19dm: gpio: Convert stm32f7 driver to livetreePatrick Delaunay
Update the GPIO driver to support a live device tree. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19spl: add SPL_RESET_SUPPORTPatrick Delaunay
Add option to include RESET driver and uclass in SPL. That can be useful to handle IP reset with same driver in U-Boot and in SPL. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19sunxi: Add AXP_PMIC_BUS kconfig entryJagan Teki
Add simple and meaningful kconfig option for pmic_bus.c instead of using MACH type on Makefile. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19video: stm32: stm32_ltdc: set the blending factoryannick fertre
Set the blending factor regarding the pixel format Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: stm32: stm32_ltdc: missing set of line interrupt positionyannick fertre
Set LIPCR (line interrupt position conf) register with line length. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: stm32: stm32_ltdc: set rate of the pixel clockyannick fertre
pxclk is useless to set pixel clock. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: stm32: stm32_ltdc: update file header & footeryannick fertre
Modified copyright & driver name. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: stm32: stm32_ltdc: add resetyannick fertre
Add reset of LTDC display controller. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: exynos: remove redundant assignmentsHeinrich Schuchardt
No need to initialize variables if the next usage is an assignment. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-19video, da8xx-fb: fix time out in wait_for_event()Heinrich Schuchardt
If an event does not occur the current coding stays in an endless loop. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-19video: stb_truetype: simplify expressionHeinrich Schuchardt
Eliminate (x2 - x2) which is always zero. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-19video: cfb_console: simplify logical constraintHeinrich Schuchardt
(A || !A && B) == (A || B) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-17usb: dwc2: Replace printf, pr_err by dev_info, dev_errPatrice Chotard
Replace printf() call by dev_info() and pr_err() by dev_err() Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17usb: dwc2: increase timeout in wait_for_chhltdChristophe Kerello
This patch increases timeout to 2s. It was seen on 2 USB devices (Verbatim STORE N GO 070B4AED0FB22358 and USB DISK 2.0 9000729BA41DDF40) that the request sense command takes between 1.3s and and 1.5s. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17usb: dwc2: disable external vbus supply when the device is removedChristophe Kerello
This patch adds an interface to disable the power in dwc2 driver. This new interface is called when the device is removed. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17usb: ohci-generic: replace pr_err() by dev_err()Patrice Chotard
As we get access to struct udevice, use dev_err() instead of pr_err(). Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit (git 2.34.1) at 2024-12-28 12:56:43 +0000